PDA

View Full Version : wont shoot with level 10


cooldude
10-12-2002, 05:37 PM
it will shoot with the regular bolt, but when i put in level 10 and the smallest spring and any number of shims it wont shoot. ive tried all the springs and have the right carrier in but it wont shoot. if i turn the velocity up to high it leaks out the back, what is the problem?
BlackVCG
10-12-2002, 06:10 PM
You need a new piston to keep it from venting too soon. Also, try firing it without the barrel on. Some barrels are too tight, or drilled off center, so they don't let the LX bolt move through the whole stroke.
cooldude
10-12-2002, 06:15 PM
i have been trying without the barrel and which part is the piston?
Shirow
10-12-2002, 06:47 PM
Unscrew the velocity adjuster all the way, the piston is in there.
BlackVCG
10-12-2002, 07:43 PM
Unscrew the velocity adjuster all the way, drop out the black spring pack and then the next thing inside is the piston. Use a dental pick to pull it out.

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=48&CATID=6