View Full Version : are the emag and rt on/off pin the same?
pballraven
10-14-2002, 12:10 AM
is the emag and rt on/off pin the same? i think its basically the same valve and they are both .712
please let me know
thanks
Miscue
10-14-2002, 01:16 AM
yep
Tunaman
10-14-2002, 05:25 AM
That all depends what Retrovalve you get...Micromags are different. Thats why AGD carries an assortment from around .712-.750.
cphilip
10-14-2002, 06:25 PM
when put into the Micro Emag it actualy requires a .670-.675 pin...
But in the stock emag, after 1000 serial numbers, and alos in some of if not all the RT pro it is indeed the .712 I think in both of those.
but!
Not sure if any earlier RT pro's took another but the lower number serial numbers in the emags I know for certain did take a longer one. .720 was it? Not sure. It had a different ON Off top too. One is brass and one is Aluminum.
I have that written down somewhere but not with me at the moment. It's on here somewhere.
BlackVCG
10-14-2002, 06:36 PM
You should never see a pin as short as .712" in a RT Valve that is NOT in an E-Mag. The E-Mag uses a .712" pin if it has a completely brass on/off assembly and if it has the aluminum top, it uses the .725" pin.
All Retro Valves come with .750" pins and RT-Pro's come with .750-765" pins.
cphilip
10-14-2002, 07:17 PM
And that is the straight poop there from Black. Black knows this stuff by heart!!!
Miscue
10-14-2002, 11:31 PM
Nerd. :)
cphilip
10-15-2002, 08:23 AM
Yea! He gotta get all them silly usless dang facts outs his head... :D
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.