noobie who needs help

[Automagger44]

Hey all, i am a noob to automags.and i need some help with somethin.....i dont know how to connect my nitro tank to the gun!!!!i dont know if i ned another regulator or what!!!I know it already has a built in reg, built not 1 that connects to the tank???So if some1 would please help me!!!!!:( :(

[AcemanPB]

You don't need a regulator for that automag, it has one built in. As a matter of fact usaually added regulators decrease the mags performance by starving the valve.

Anyways what kind of tank do you have? if it's a screw in like this tank then you would screw it in just like you would Co2

[Automagger44]

come on i know thee is some people browsin this forum!!!!please help me!!!!!!!!

[Automagger44]

my tank is a screw in, but the gun dosnt have a ASA adapter, theres nowhere to screw it in!!!!!thats y i posted this

[Automagger44]

will some1 plz help me????AcemanPB thx for that but could you read what i posted before this 1, plz!!!!!!

[Mgwannabie]

ok there are an # of things u need to buy, one of them is an asa adapter another fittings i would suggest macro lines and then u SHOULD be able to hook it up unless ur a complete n00b

[AcemanPB]

hope this helps, this is a picture a found on the Automag Picture Thread.

http://pic2.picturetrail.com/VOL8/113086/213344/4230944.jpg

[Automagger44]

ok, i have a macro line or air hose whatever its called...and a macrolin elbow...but at the end of the hose theres my on and off valv and this screw deally.....but its way too littl to put on the nitro tank threads.....soo if you could help again.......and how mush are ASA adapters????and where can i get them???:confused:

[AcemanPB]

ok i'm not quite sure what your talkning about but check the online store at www.airgun.com, i found this (http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=215&CATID=6) . This part would screw onto your body rail right in front of your trigger frame

[Automagger44]

theres my gun, but let m get another picture of the thing im talkin about...

[Automagger44]

ok look at the thing connected the th air hose..the air hose is right under the gun...do you see it????

[DarkPhoenix]

Ok, the problem here is that you need a on/off adapter to screw your tank into. This would remove your need for the on/off in your picture, you will however need another macroline elbow fitting. Since it looks like you have a kapp dropzone cradle, the on/off adapters at the bottom of this link http://www.paintballgear.net/paintball-gas-systems-cradles-kapp-cradles.html should help you out perfectly.

[Gotcha3]

Your gonna kick yourself when you see how easy this is...
First of all, it looks like the cradle you have is meant for a non-screw in type N2 tank. Just buy one of the Shocktech or 32 Degrees drop forwards and get a regular "duckbill" ASA adapter (The drop forward will screw in directly beneath your trigger frame, and the duckbill ASA adapter will screw directly into your drop forward) Moving forward--simply take a 90 degree macroline elbow (obviously use teflon tape or Loc-tite on the threads of the macroline elbow) and screw the elbow into the hole on the corresponding side of your "duckbill". Finally attach the macroline into your 90 degree macroline elbow and attach the other end of the macroline into the 90 degree elbow that is connected to the regulator on the gun.
Hope this helps,
Aaron
:::::::::D:::::::::D ::::::D Check It Ref!

[Automagger44]

ok thanks for that, but what is wrong with my mico line????i dont want to have to spnd like $100.00 just for that!!!!And where can i get a duckbill ASA adapter??????I NEED HELP!!!!!!!!!!!!!

[Automagger44]

yo darkpheonix or whatever....so that on/off thingy fits onto my cradle and i just screw my nitro tank into that?????if this is right plz say so...but do i need a new macro line hose to do that????if so would you please tell me where i can get 1...:D :( :( :confused: :confused: :confused: :cool: :)

[EsPo]

from what it looks like u need <a href="http://www.paintballgear.net/013-4007-4.html">This</a>
and <a href="http://www.paintballgear.net/039-5111.html">this</a>im almost positive.

[Automagger44]

ok i think my micro line elbow thingy is just like that 1,but does that mean i dont have to buy a new hose???please tell me!!!!!!!

[Automagger44]

ok i just checked my fitting thing and it is the same as the 1 on paintballgear.com/...but is that all i need??????

[Whitt_travis]

I can't believe you have a mag and a bunch of other nice stuff, and you don't even know how to connect your tank. That's friggin sad.

[Automagger44]

i know its very sad!!!!!!im a noob with a mag:( ;) :( :(

[DarkPhoenix]

Yes, all you need is the kapp on/off adapter (which matches your drop forward) and a 90 degree microline fitting to connect your hose to the on/off adapter. You will be able to screw your tank into the on/off adapter.