PDA

View Full Version : a cocker body/internals question...


Jonno06
11-10-2002, 09:41 PM
do you know if the internals to this gun below will fit in the body that i will pot in the next post..

it appears to be a 99 cocker,sO im not sure:-\
Jonno06
11-10-2002, 09:44 PM
heres the spanky body
Laser
11-10-2002, 09:48 PM
I would think the only problem might be the bolt.
Jonno06
11-10-2002, 10:37 PM
what is the difference in the bolts?
-=Squid=-
11-10-2002, 11:51 PM
It will work great, but you need a new bolt. Will you be interested in selling the other body when u get the spanky?
Jonno06
11-11-2002, 06:21 AM
yea,i would need to sell the purple body before I get the spanky...and I wanted a new bolt anywayz....
-=Squid=-
11-11-2002, 08:21 AM
How much do you want for it?
Jonno06
11-12-2002, 03:38 PM
pm me,or IM me at Punk3rj0n69.
Paintballzer
11-12-2002, 06:54 PM
nope, it won't work. If the first one is a '99 and the second is a 2k+. The springs for the valve and main spring, the banjo bolt (bolt that hold the front block onto the body,& the front block. won't work. The bolt will work if you use the right size back block for it.
Hoplon
11-12-2002, 08:42 PM
Originally posted by Paintballzer
nope, it won't work. If the first one is a '99 and the second is a 2k+. The springs for the valve and main spring, the banjo bolt (bolt that hold the front block onto the body,& the front block. won't work. The bolt will work if you use the right size back block for it.

Thats $20 worth the parts not counting the bolt for those keeping track at home.
Paintballzer
11-12-2002, 08:58 PM
About, but thats only cause hes getting the front block w/ the body. Make sure you have the valve tool and a 12 point thingy for the asa screw if your gunna do it yourself. Make sure to go to www.air-powered.com for your cocker needs, you'll get better answers about cocker there.