Who has the oldest mag?

[hostage]

I am curious if their is any really old mags? Anyone have SN 00001? Would kind of be cool to see how well they keep up.
-Hostage

[LittMag]

SEARCH!!! ;) sorry... just thought I'd rub it in, but I have mag CF0115X (the X is there for security reasons. Forget how old it is, but it's at least 7 or 8 years old, and it runs like any new automag out there.

http://www.automags.org/forums/showthread.php?s=&threadid=16017&highlight=oldest+mag

[Muzikman]

My guess is that it's older than that. My mag is about 9 years old bought brand new and I know the serial number is not that low.

On a side not. Most AGD products start at Serial number 100 or 101. Except for their sydarm (which Tom didn't even know, and nearly gave me a heart attack, select few people at the SC AO meet knows what this means).

I can not remember what my Mag serial numbers are but I do have Sydarm sy00101.

[Kneedragger]

I had #747 that I bought new back in the early 90's. It was a level 5 back then, had it go through the upgrade processes until level 7. I had it up until Tom deemed the valve was no longer servicable (which meant, he just wanted to keep it because it was less then # 1000 :D ) That was back in '99 if I remember correctly.

[mxracer33x]

A good friend of mine has CF00305 and it is still running strong. I believe he got it in 90 or 91. It was sent in several times and finally upgraded to level 7. Since then it has had level 10 installed and is working very well.

[Brian68mag]

not close to the oldest but i got Cf44850 on the classic and 1728 on the Emag :)

[The Frymarker]

I have a fairly old micromag, I forget which year they said they were made but I know it is a first edition.


On the body is #25 I have no idea if this is the serial or not.

[ronron2112]

I have RTP718.. nothin special.. but still under 1000

[hostage]

my retro is in the VV1700's and my automag is in the CF26000's

[banzaimf]

mm1321

[BajaBoy]

my friends mini is in the 800's.. its alot diff from new ones.. the Ans/Lab?shocktech reg body wont even fit on it

[Kevmaster]

hehe, yeh, muzik, you dont have to tell people that they didnt start at 100 for the sydarms

i have SN #13...and SNs 1-12 were all stolen at the 97 IAO--putting mine as the lowest SN available...oh... wait...you mean on a mag? Doh! Thats my Rainmaker

hehe

[cheetah256]

well, i have RT # RT00803..i guess thats kinda old..

[kemikos]

A local PB shop used to have a 'Mag up on the wall that was #0014x or something insanely old like that...

[MinimagRockin']

MM06370 pretty cool I never knew how old it was until now.

[kenshinkandon]

I just traded my cocker for a RTP with the serial # 372

[punkcmonkiez]

Retro Valve #191 and Emag #127 both work great.

[warpfeedmod]

The Emag I just got used is 00439

Not sure what my RTPro is, I'll have to check but I know I got it shortly after they came out

[Kevmaster]

i had damn well better have a under 100 on my XMag coming in soon...i ordered mine at the IAO(Just wanted red and at dealer pricing, so i dint buy there)!

[Jason Reed]

mine is
cf16000
and
vv01600

[KayleAGD]

Here is part of my collection of mags

E-Mag 214 (with GripGyrl left handed grips)
RT 214
Automag 214

and GFX micromag 394 for frymarkerhttp://www.tellcity.net/kayle/214.jpg

[mag-hatter]

my sn is in the 3ooo's

[Blazestorm]

I think Kayle just steals the 214th gun made and puts it in his room and prays that Tom doesn't notice

Tom... better watch him! ... He'll want the 214th X-Mag too :p

Just kidding... that's pretty cool that you get all the 214th mags...

I think my old RT was Cheetahs... 803 I believe... my emag is..... 1518 ... sooo close ;)

:D

plus it was cphil's emag!

[The Frymarker]

Hey Kayle,

You have a micromag as well, would you happen to know how old mine is?

Hope you like the grips.

I am going to a lot to my baby.

I have completely stripped off all of the anodizing and polished it. When I can find the time I am going to hand engraving roses on specific parts of the marker. Then I have a few more additions, which I can't tell because I want it to be a surprise;)

[Muzikman]

I'm not 100% sure..but I think the Generation 1 Micros with the fixed barrels came out around '95. Atleast that's the first time I ever saw one at the IAO.

[FeelTheRT]

there is an RT # RT00069 floating around on AO.

[SGTKennedy]

i think i have the oldest. CF00147. its aweful scratched and you can barely read anything... i rescued it from a 13 year old who bought it from a local store and was fixin to kill it. it doesnt work very well yet.
i havent put much into it. and i dont want to send it in to AGD, or Tom might decide to keep it. ;)

[Muzikman]

FeeltheRT,
So AGD didn't start the RT at serial number 100 either huh? Wonder if Tom knows this:)

[datapimp69]

KayleAGD,

you run your network cables throu the heat vents too.

and i thought i was the only one.

:)

[Muzikman]

Data,
It doesn't look like the cables are coming through the heat vent. It just looks like a loop of cable laying over the register.

[datapimp69]

thats to bad,

i find it the best way to get cables around a 2 story house.

a weight and a long string, and a drill.

and you have a cable from upstares to the basment.

[magman007]

well my e-mag is some where in the 100's.....

[KayleAGD]

Nope, just misc. crap laying around in my computer room..And by the way i have fiber running through the house to my server. (geek wanna be! )

[FreshmanBob]

my micromag valve is 1004

probably around 96, the body was replaced with a newer one a while back though.

[jeffremiller]

Huh... cable in the heat ducts.... original. I'll get right on that one :)

[Emagster]

i have emag em00167 i belive or really close to that atleast

[toymyster]

My E-Mag is #1269, and the RT I just acquired is in the 400s!!! I know, nothing too special!!

[Riddler236]

I used to have Minimag (MM) 4232. I don't even know how old that gun was. I ended up selling the valve and upgrading to a ReTro.