View Full Version : Level 10 question(not realy technical)
acecl22
12-03-2002, 07:11 PM
I just installed my level ten and the velocity is an insane amount in with the medium spring, i was just wondering if this is normal, go here
http://photos.yahoo.com/bc/acecl22/vwp?.dir=/My+Photos&.dnm=MiniMag.jpg&.src=ph&.view=t&.hires=t
Load SM5
12-03-2002, 07:15 PM
link does'nt work..define "insane amount".
acecl22
12-03-2002, 07:17 PM
there are not many threads showing out of the gun
Load SM5
12-03-2002, 07:22 PM
On the velocity adjuster?
acecl22
12-03-2002, 07:23 PM
yeah
Load SM5
12-03-2002, 07:28 PM
What's your velocity? Shooting 280's with it that far out?
acecl22
12-03-2002, 07:30 PM
not exactly sure, dont have a crono, havent been to the field, it only works with it like that, with the shorter spring it sticks like crazy
Load SM5
12-03-2002, 07:35 PM
You may be just fine. It may be cycling but shooting really low. Take it to the field and chrono it when you get a chance. You should'nt get bolt stick with the shorter spring, though. Are you using the loosest carrier without a barrel leak?
acecl22
12-03-2002, 07:38 PM
so you think it might be normal for the velocity adjuster to be in that far
Load SM5
12-03-2002, 07:41 PM
You do have to crank the velocity down a good bit to get the gun to chrono to 280-300 with level 10. It's normal. If it way too far or you bottom it out before getting 280-300fps you may need a new spring pack. Hard to say without a chrono.
acecl22
12-03-2002, 07:42 PM
okay thanks
Load SM5
12-03-2002, 07:43 PM
Anytime bro. Hope it works out for you. Yell if you have problems.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.