*Official Automag Pictures*

[-§on-]

AO Picture Galleries:


Mechanical Mags (http://www.automags.org/forums/content.php?549-mechanical-mags)
Electronic Mags (http://www.automags.org/forums/content.php?523-electronic-mags)
Pump Mags (http://www.automags.org/forums/content.php?546-pump-mags)
MotM Winners Circle (http://www.automags.org/forums/content.php?83-motm-winner-circle)
Build Threads (http://www.automags.org/forums/content.php?37-build-threads-special-mags)
Special Mags (http://www.automags.org/forums/content.php?384-special-mags)


Ok This is The Real Deal Pictures. Im just going to Try to Make up a Couple rules though.

1. Do not Talk unless you have posted a picture.
2. No Slaming only compliments.
If you don't know how to post pics read rules, I think it has it there. If you feel to lazy do this. YOUR LINK HERE
I will Post My Emag Pictures Shortly.

My Old Mag:

When I started:
http://www.hunting-pictures.com/members/TacticalJay/My%20Gun%20b4.jpg

When I finished:
http://www.hunting-pictures.com/members/TacticalJay/after.jpg

http://www.hunting-pictures.com/members/TacticalJay/Sideshot.jpg

[Army]

OK, time to update my pics. (05 Sept '03}

Golden Gun #0007 (I also have valve #0008):
http://i11.photobucket.com/albums/a198/Messkit/OIF-22004-2005627.jpg
http://i11.photobucket.com/albums/a198/Messkit/P4020026.jpg
http://i11.photobucket.com/albums/a198/Messkit/P4020029.jpg

[magc68]

give me a week or 2 and ill have the final pic up. a few more thing in the mail then gun will be done

http://recursionpb.homestead.com/files/dyeWarp.jpg



[This message has been edited by magc68 (edited 07-03-2001).]

[Yipe]

You've probably seen these pics before, but here they are again for your viewing pleasure. Just a few more upgrades and my Mag will be complete, and my wallet can rest easy...

http://www.automags.org/~BlackVCG/Yipe/Mattgun06.jpg

http://www.automags.org/~BlackVCG/Yipe/Mattgun07.jpg

http://www.automags.org/~BlackVCG/Yipe/Mattgun04.jpg

[blitz134]

http://www.prism.gatech.edu/~gte557v/blitzgun.jpg

[Dragoon]

Here we go..


http://www.hunting-pictures.com/members/Dragoon/my%20guns%20-%20reduced%20size.jpg

Whoohoooo...
It worked. My first pic posted online!
I've sold the mag in the center with the DZII and the raptor N2 system, and the e-mag now has a black warp body.

What do you think of my collection?
I hope to one day have it mounted in a nice cabinet with proper lighting and brass name plaques.

Keep 'em comming.

Douglas



[This message has been edited by Dragoon (edited 07-03-2001).]

[Major Jam]

http://www.qnet.com/~mike/em/em1.jpg

Heh, like the almost 3 year later edit?

[MiteyWhitey]

Doug's Dyed out Mini

<img src="http://www.momentoffame.com/snapshots/MomentOfFame/l7483.jpg" width=640 height=480 border=0>


------------------
dat...dat...dat... "Check yourself!"

[This message has been edited by MiteyWhitey (edited 07-03-2001).]

[This message has been edited by MiteyWhitey (edited 07-03-2001).]

[Lord Vader]

Finally, the Dark Jedi Mag (drum roll..)
http://www.hunting-pictures.com/members/timmy_d777/pbgun1.jpg

------------------
<<<Dark Jedi Mag>>>
Black Teflon E-mag body
Retro Valve
Black 9V Revvy
LAPCO 12" Autospirit
KAPP black foregrip
PMI rubber grips
Sretch-Z Drop Forward
68/3000 Flatline

"I am your father."
--Darth Vader

[This message has been edited by Lord Vader (edited 07-03-2001).]

[This message has been edited by Lord Vader (edited 07-03-2001).]

[This message has been edited by Lord Vader (edited 07-03-2001).]

[billmi]

My wine to blue fade e-mag with matching faded Warp feed, J&J barrel and Armson Pro-Dot sight

http://www.warpig.com/paintball/technical/paintguns/emag/emag_warp.jpg

As viewed from the business end...
http://www.warpig.com/paintball/technical/paintguns/emag/emag_front.jpg

See you on the field,
-Bill Mills

------------------
Computer / Paintball geek
Technical Editor, World And Regional Paintball Information Guide - http://www.WARPIG.com
Producer, Paintball Television - http://www.PigTV.net

[randomboy]

aaaah, hunting-pictures.com, catering to all your web hosting needs http://www.automags.org/ubb/wink.gif

Heres my gun, I have black macro line and polished 90 degree fittings to put on, but I'm waiting till I get my 68ci flatline to put it all on, so I can get the hose lengths right, that and my kapp gas thru http://www.automags.org/ubb/smile.gif

http://www.hunting-pictures.com/members/randomboy/allpic.jpg If anyone could tell me what that barrel on the bottom is, that would be great, I have no clue, I just know its small bore.


http://www.hunting-pictures.com/members/randomboy/justgun.jpg
Paintjob done by moi, do you like all the scratches in it that I haven't sanded and polished out yet? http://www.automags.org/ubb/wink.gif

[themani76]

Current Username: BlueMagRT

<a href="http://home.comcast.net/~bluemagrt/paintball/3sydarms.jpg">
<img src="http://home.comcast.net/~bluemagrt/paintball/3sydarms.jpg" width="200" height="200" />
<a href="http://home.comcast.net/~bluemagrt/paintball/rtequation2.jpg">
<img src="http://home.comcast.net/~bluemagrt/paintball/rtequation2.jpg" width="200" height="200" />
<a href="http://home.comcast.net/~bluemagrt/paintball/xmag1.jpg">
<img src="http://home.comcast.net/~bluemagrt/paintball/xmag1.jpg" width="200" height="200" />
<a href="http://home.comcast.net/~bluemagrt/paintball/ultclassic.jpg">
<img src="http://home.comcast.net/~bluemagrt/paintball/ultclassic.jpg" width="200" height="200" />
<a href="http://home.comcast.net/~bluemagrt/paintball/classicblack.jpg">
<img src="http://home.comcast.net/~bluemagrt/paintball/classicblack.jpg" width="200" height="200" />
<a href="http://home.comcast.net/~bluemagrt/paintball/projectgun.jpg">
<img src="http://home.comcast.net/~bluemagrt/paintball/projectgun.jpg" width="200" height="200" />

----------------
3 Sydarms - 2 original grey bodies 1 polished body on tac rail Blue Smear Classic RT - blue feed and revy - Equation Designs Barrel kit X-Mag - Red warp feed and Halo B Ult Mag - smoke warp and revy Classic RT - minimag barrel Project Gun Made with spare parts and a Dye Boomstick

[-§on-]

Vil3- To help you out-----

http://www.hunting-pictures.com/members/TacticalJay/Emag%20Vil.jpg


http://www.hunting-pictures.com/members/TacticalJay/Emag%20Vils.jpg

[This message has been edited by -§on- (edited 07-08-2001).]

[fzxboy]

http://www.prism.gatech.edu/~gte445p/images/huntermag.jpg

[This message has been edited by fzxboy (edited 07-05-2001).]

[DarkRipper]

http://www.automags.org/ubb/Forum1/HTML/003262.html

http://www.automags.org/ubb/smile.gif
DR

[-§on-]

FeelTheRt-

http://www.hunting-pictures.com/members/TacticalJay/Feelthert.jpg

http://www.hunting-pictures.com/members/TacticalJay/Feelthert1.jpg

[This message has been edited by -§on- (edited 07-08-2001).]

[FeelTheRT]

http://albums.photopoint.com/j/View?u=1740539&a=13393090&p=51302512&Sequence=0&res=high some more!

http://albums.photopoint.com/j/View?u=1740539&a=13393090&p=51302512&Sequence=0&res=high

[rythm68]

http://www.hunting-pictures.com/members/rythm682001/side.gif

http://www.hunting-pictures.com/members/rythm682001/side2.gif

DUDE - I broke these pic links for 2 resons #1 450k+ pics are killer for anyone on a dial up and #2 you used GIF's take this pics make the jpegs with about 50% compresstion and then edit this post to fix. - Robert

------------------
E-mag balck teflon p/f hopper left
Blue J&J 16/14/10" two piece tilt
Hyperflow 88/4500 (on its way)
Blue Revy 12V
blue Warp

[This message has been edited by RobAGD (edited 07-13-2001).]

[-§on-]

Ah Finally Hot Off the Press. My Emag. Im Done with the Gun for now. Im going to get an Adjustable for My birthday though. Im also going to get another barrel. http://www.automags.org/ubb/smile.gif

http://www.hunting-pictures.com/members/TacticalJay/My%20Emag.jpg

http://www.hunting-pictures.com/members/TacticalJay/My%20Emag%202.jpg

[-§on-]

This is BackDraft's Mag.

http://www.hunting-pictures.com/members/TacticalJay/Tyson::s%20Mag.jpg

This is Both of our mags. Sorry for the Poor quilty.

http://www.hunting-pictures.com/members/TacticalJay/Ty&me.jpg

[This message has been edited by -§on- (edited 07-06-2001).]

[-§on-]

Another Picture of my Emag...

http://www.hunting-pictures.com/members/TacticalJay/Emag.jpg

[Mega Man]

http://www.hunting-pictures.com/members/Whoppers/mymag1.jpg
http://www.hunting-pictures.com/members/Whoppers/mymag2.jpg
http://www.hunting-pictures.com/members/Whoppers/mymag3.jpg


Dude, compress your pics and then repost them. BlackVCG
This enough? BlackVCG

[randomboy]

**UPDATED PICS**
http://www.hunting-pictures.com/members/randomboy/gunangle.jpg
http://www.hunting-pictures.com/members/randomboy/fullboxes.jpg

New things added:
-68ci AGD Flatline (with ghetto neoprene sock tank cover, just until I can get a real cover)
-Black macroline and fittings

Still using the Black Ice reg as stricly a foregrip, as using the gun without it just doesn't work for me and is very uncomfy, gonna put a black Kapp gas thru on in place of that http://www.automags.org/ubb/smile.gif Like my gun?

Oh yeah, and everyone whos posted JUST text replies, please delete them, thanks. Or if BlackVCG or Webby would like to take care of that, that'd be great http://www.automags.org/ubb/smile.gif

[donggie]

http://albums.photopoint.com/j/View?u=1748607&a=13466459&p=51527288

http://albums.photopoint.com/j/View?u=1748607&a=13466459&p=51526430

http://albums.photopoint.com/j/View?u=1748607&a=13466459&p=51526450



[This message has been edited by donggie (edited 07-09-2001).]

[SniperWolf]

http://www.hunting-pictures.com/members/SniperWolf/newgun4!.jpg dang i need a better camera

------------------
Frag'd, toe tagg'd and body bag'd,
hell son, you mustve just been automag'd

[Vil3]

http://www.hunting-pictures.com/members/Vil3/Dsc00011.jpg
http://www.hunting-pictures.com/members/Vil3/Dsc00020.jpg
http://www.hunting-pictures.com/members/Vil3/Dsc00021.jpg JUST ABOUT KILLED ALL U 56kers uploading these pics huh? lol

[FeelTheRT]

---BlackVCG------

this Minimag belongs to BlackVCG

http://www.automags.org/~BlackVCG/MiniMag/MiniMag_01.JPG

http://www.automags.org/~BlackVCG/MiniMag/MiniMag_05.JPG

http://www.automags.org/~BlackVCG/MiniMag/MiniMag_02.JPG

http://www.automags.org/~BlackVCG/MiniMag/MiniMag_03.JPG

http://www.automags.org/~BlackVCG/MiniMag/MiniMag_06.JPG

This is BlackVCG's gun

[FlipFlops]

Here's my latest baby. Z Grip, AGD Warp Feed with parallel 9 volts, polished hopper right Minimag body, and a 12" Dye Boomstick. Can't forget my Centerflag Hyperflow either :-)

http://www.planethalflife.com/oz/automag/latest/mag1.jpg

http://www.planethalflife.com/oz/automag/latest/mag2.jpg

http://www.planethalflife.com/oz/automag/latest/mag3.jpg

I actually used it as shown this last weekend down in Florida at the MXS MI2001 scenario game at Camp Blanding's MOUT site. It saw over 2 and a half cases of paint through it, with only 2 chops when my revvie ran out of batteries. It absolutely rips, and I had all kinds of nice comments about the gun from refs, players, and even a few emag owners :-)

[-§on-]

Thordic- http://www.hunting-pictures.com/members/TacticalJay/Thordic.jpg

[LawFox32]

Here's my new(to me) mag. I love it.


http://www.photoasa.com/disk2/3312/66462_Mag_on_Chair.jpeg

Here's me w/ it

http://www.photoasa.com/disk2/3312/66463_Good_me_and_Mag.jpeg


Inside the All-American

http://www.photoasa.com/disk2/3312/66465_Inside_the_All-american.jpeg


mag on Puzzle table

http://www.photoasa.com/disk2/3312/66466_Puzzle_Mag.jpeg


Hope ya liked the pics

E-mail me at LKH4765@aol.com if you have comments

thanx


[This message has been edited by LawFox32 (edited 07-11-2001).]

[This message has been edited by LawFox32 (edited 07-11-2001).]

[This message has been edited by LawFox32 (edited 07-11-2001).]

[virus]

ok here are mine..... granted one is not a mag but i said a while ago... ok before the problems with the host anyway


www.hunting-pictures.com/members/virus/minimag_in.jpg


www.hunting-pictures.com/members/virus/sov2dye.jpg

ok this isn't workin for some reason so here are the links them selves enjoy

http://www.hunting-pictures.com/members/virus/sov2dye.jpg

http://www.hunting-pictures.com/members/virus/minimag_in.jpg


[This message has been edited by virus (edited 07-11-2001).]

[-§on-]

Virus- http://www.hunting-pictures.com/members/virus/minimag_in.jpg

http://www.hunting-pictures.com/members/virus/sov2dye.jpg

[-§on-]

http://www.hunting-pictures.com/members/TacticalJay/Dsc00025.jpg

http://www.hunting-pictures.com/members/TacticalJay/Dsc00026.jpg

http://www.hunting-pictures.com/members/TacticalJay/Dsc00027.jpg

http://www.hunting-pictures.com/members/TacticalJay/Dsc00028.jpg

[XspyX]

UPDATE

http://pic2.picturetrail.com/VOL7/52876/217944/2898734.jpg

http://pic2.picturetrail.com/VOL7/52876/217944/2898729.jpg

http://pic2.picturetrail.com/VOL7/52876/217944/2898726.jpg

http://pic2.picturetrail.com/VOL7/52876/217944/2898733.jpg


------------------
Pepsi Is Good
http://www.pepsi.com/current/joy_of_pepsi/product/images/pepsi_can.gif
Never kick a fresh TURD on a HOT day!

[This message has been edited by XspyX (edited 07-18-2001).]

[klb311]

<img src="http://www.hunting-pictures.com/members/klb311/Image029.jpg"width=1280 height=960 border=0>

I hope this worked

[blackmag]

http://www.hunting-pictures.com/members/blackmag/cap_001.jpg

hope this works....
I linked it properly so it works. BlackVCG
------------------
ReTro valve
classic-vertical feed mag
Benchy 2X w/dye stickes
lapco bigshot
12vl

[xmetal2001]

My Mag:
http://www.hunting-pictures.com/members/xmetal2001/automagpic1.jpg

http://www.hunting-pictures.com/members/xmetal2001/automagpic2.jpg

------------------
***XMetal2001***
Standard Feed Classic Mag
Polished Body
9volt Rev
BOA Snakebit
47ci Preset
Double Trigger
TKO Cradle
KAPP Black Foregrip

[This message has been edited by xmetal2001 (edited 07-19-2001).]

[This message has been edited by xmetal2001 (edited 07-19-2001).]

[-§on-]

BlackMag- http://www.hunting-pictures.com/members/blackmag/cap_001.jpg

Oh yeah you like the Cp on there huh?

[paintballpark187]

SON, how u have that RAD vertical feed?!?!??!??!?

[FlipFlops]

Um...that's not a vertical feed on Son's emag...

[paintballpark187]

NOT emag, the one post above mine, the mag by (weird S)son

[PyromaniaX]

well i think that BBT sells vert feed minimags.... They are pretty bad arse

[mikey101]

http://www.hunting-pictures.com/members/mikey101/Dsc00014.jpg

[blackmag]

i think he is talking about my mag...yeah its vertical feed but isnt the one from bbt or predator paintball....its classic feed that got worked on a company

more pictures

http://www.hunting-pictures.com/members/blackmag/cap_003.jpg

http://www.hunting-pictures.com/members/blackmag/cap_004.jpg

------------------
ReTro valve
classic-vertical feed mag
Benchy 2X w/dye stickes
lapco bigshot
12vl
http://www.stopstart.fsnet.co.uk/smilie/fire.gif

[Load SM5]

Maybe he's talking about my vert feed e-mag pic that Son posted for me on page 1.

[blackmag]

are u talking about my mag?

more pictures...
<img><A HREF="http://www.hunting-pictures.com/members/blackmag/cap_004.jpg" TARGET=_blank><img>
<img>http://www.hunting-pictures.com/members/blackmag/cap_004.jpg</A> <img>

------------------
ReTro valve
classic-vertical feed mag
Benchy 2X w/dye stickes
lapco bigshot
12vl
http://www.stopstart.fsnet.co.uk/smilie/fire.gif

[This message has been edited by blackmag (edited 07-21-2001).]

[-§on-]

Those aren't my mags...

[blackmag]

can i get some help here....

last picture

http://www.hunting-pictures.com/members/blackmag/cap_005.jpg

[FeelTheRT]

http://www.hunting-pictures.com/members/blackmag/cap_005.jpg

vert feed... hrmmm

[Java110]

http://members.hometown.aol.com/vairfanatic/images/mag.jpg

[Java110]

Ok so that didnt work. Heres a link to my site. Only my mag is on it so far.

http://hometown.aol.com/vairfanatic/mygunz.html

[dager]

my wife's
http://www.hunting-pictures.com/members/dager/nelmag.jpg

boxless version
http://www.hunting-pictures.com/members/dager/redblack.jpg

[This message has been edited by dager (edited 07-24-2001).]

[XspyX]

Java110 - http://members.hometown.aol.com/vairfanatic/images/mag.jpg

[MicroB]

<img src=http://albums.photopoint.com/j/View?u=1753351&a=13508354&p=51896249>


------------------
2001 Micromag RT w/68-4500, Z-grip and Lapco big Shot.

[randomboy]

Update....still changing my gun almost daily....and any time now this one will have a little brother http://www.automags.org/ubb/wink.gif Gettin a mini...but anyways, on with the pics!

http://www.hunting-pictures.com/members/randomboy/full.jpg

http://www.hunting-pictures.com/members/randomboy/angle.jpg

J&J 12" Full tilt, 68ci Flatline, polished p/f body, z-grip, ReTro valve.

Waiting on - blue or red Redz neoprene tank cover, and Kapp foregrip extender so I can actually use my new Kapp gas thru grip.

[FeelTheRT]

i got some pics of my gun with a Warp Feed.

http://www.hunting-pictures.com/members/ThatPaintballerGuy/WarpRT1.jpg
http://www.hunting-pictures.com/members/ThatPaintballerGuy/WarpRT2.jpg
http://www.hunting-pictures.com/members/ThatPaintballerGuy/WarpRT3.jpg
http://www.hunting-pictures.com/members/ThatPaintballerGuy/WarpRT4.jpg

[WickeDKlowN]

Here.....Sorry for the crappy pics (http://www.geocities.com/xeon42069/mag.html)

------------------
WickeDKlowN
IRC:|^XeoN^|
ICQ:119109049
XeoN42069@aol.com
http://www.hunting-pictures.com/members/Xeon/Image3.jpg
Team TwiztiD (http://teamtwiztid.cjb.net/)

[PyromaniaX]

hmm i should really get the Alias SuperOrangeTicTac on AO cuz thats how everyone knows me on the IRC chat... oh well

heres my gun. Soon to have flatline, Benchy gas thru, warp.

http://albums.photopoint.com/j/View?u=1750071&a=13479983&p=52183008&Sequence=0&res=high

[cphilip]

Here is mine as it is now. Updated for Warp, Freak 12 inch AA on it.

http://albums.photopoint.com/j/View?u=193146&a=10953897&p=52286565

http://albums.photopoint.com/j/View?u=193146&a=10953897&p=52287437

------------------
Quote: Beer is living proof that God loves us and wants us to be happy
Author: Benjamin Franklin

[This message has been edited by cphilip (edited 07-29-2001).]

[FeelTheRT]

cphilip: what sensativity level do u have your Warp Feed set at? i have mine set at the lowest sensativity and it works fine.

[jasonmoe]

<img src="http://www.hunting-pictures.com/members/jasonm/h3.jpg" width=600 height=600 border=0>




[This message has been edited by jasonmoe (edited 08-28-2001).]

[PCI2000]

http://www.hunting-pictures.com/members/PCI2000/JimsMag.jpg


------------------
Black Teflon ReTro Mag (http://www.hunting-pictures.com/members/PCI2000/)
Warped Sportz Drop Forward
68ci/4500psi Centerflag Hyperflow 420 tank
Benchmark 45 grip frame w/Dye sticky grips
KAPP foregrip extender w/Benchmark foregrip

[crm]

http://crm.clanbrethren.com/images/crm-minimag1.jpg

[This message has been edited by crm (edited 08-01-2001).]

[-§on-]

Mine Again-

http://www.hunting-pictures.com/members/TacticalJay/What%20you%20Get.jpg

[p8ntballa]

http://www.geocities.com/n64villan/5.bmp
i didnt knwo the codes for this forum so go there of someone do it for me.
My mag, the pic is kind of bad, but thats what you get with a 8 dollar digital camera.
It started as a standard feed 68 classic, now it has a Black tephlon powerfeed right body, Splashed double trigger, SP Gadget grip, Macro Line, TKO Cradle, PMI 6 ci Steel tank, 12 in Dye aluminum, and my 10 inch J&J Ceramic just arrived today http://www.automags.org/ubb/smile.gif

[This message has been edited by p8ntballa (edited 08-01-2001).]

[-§on-]

There ya Go:

http://www.hunting-pictures.com/members/TacticalJay/Mag.jpg

[PAINTBALLA01]

heres my pics except i ran the hose around the front of the gun

http://www.hunting-pictures.com/members/pntball650/barrel1.jpg

http://www.hunting-pictures.com/members/pntball650/left%20profile.jpg

http://www.hunting-pictures.com/members/pntball650/right%20profile.jpg


------------------
68 classic
INTELLIFRAME
blue warp
9 vlt revy
aci gas through foregrip
microlines
13"armson stealth
12" sp progressive
68 stub tank
tko drop foward

[-§on-]

http://pic2.picturetrail.com/VOL8/113086/405315/4073138.jpg

http://pic2.picturetrail.com/VOL8/113086/405315/4073136.jpg

http://pic2.picturetrail.com/VOL8/113086/405315/4073117.jpg

------------------
Aim: TacticalJay
Email: TacticalJay8@adelphia.net
EMAG WITH:
Blue Warp Feed
Blue 12 Volt
68ci 3000psi Stub
Lapco Bigshot
12 inch Splashed red AA
Kapp DZII
http://www.stopstart.fsnet.co.uk/smilie/thumbs.gif

[Prezents]

Here is my mag "YOSHI"
Retro Valve
Warp Feed
To many barrels!!!!!!!!
Custom made drop forward
Prezents
http://www.lewistown.net/~santa/tbone/images/mymag3.jpg

http://www.lewistown.net/~santa/tbone/images/mymag1.jpg
http://www.lewistown.net/~santa/tbone/images/mymag5.jpg

[This message has been edited by Prezents (edited 08-28-2001).]

[XspyX]

Prezents:
http://www.lewistown.net/~santa/tbone/images/mymag3.jpg

http://www.lewistown.net/~santa/tbone/images/mymag1.jpg

[This message has been edited by XspyX (edited 08-28-2001).]

[XspyX]

Mine:

http://pic2.picturetrail.com/VOL7/52876/217944/3248265.jpg
http://pic2.picturetrail.com/VOL7/52876/217944/4008355.jpg
http://pic2.picturetrail.com/VOL7/52876/217944/4008352.jpg
http://pic2.picturetrail.com/VOL7/52876/217944/4005713.jpg
http://pic2.picturetrail.com/VOL7/52876/217944/4005696.jpg

And thats all ya need to see my friends http://www.automags.org/ubb/biggrin.gif

------------------
Never kick a fresh turd on a hot day!


Automag P/F - Chrome
Chrome Dye 1x Frame
14" SS AA Barrel
18" Boomstick :)
My Mag Pic's (http://www.picturetrail.com/gallery/view?p=999&gid=217944&uid=52876&members=1)

Thats all you need to know

[Dubstar112]

hmm.. i looked and i couldnt find my pic.. so ill post agian,

------------------
http://www.hunting-pictures.com/members/Dubstar112/My%20new%20mag.jpg

[magman007]

My Rt pro with stock and freak barrels http://www.hunting-pictures.com/members/magman007/rtfreak2.jpg
http://www.hunting-pictures.com/members/magman007/rtstock2.jpg

[-§on-]

http://pic2.picturetrail.com/VOL8/113086/213344/4230942.jpg

http://pic2.picturetrail.com/VOL8/113086/213344/4230944.jpg

http://pic2.picturetrail.com/VOL8/113086/213344/4230937.jpg

Its for sale if anyone wants it. PM me.

[StevoC]

OK, here's a pic of my updated mag.

<img src="http://www.mbay.net/~costanza/new/mag1.gif" alt="my mag" width=600 height=300 align=middle>

I also have 2 stainless barrels, both Lapco: a bigshot and Autospirit.

[Blake_sw]

Gold mag, bling bling. I just got a Teardrop, Stickies and a PMI dropforward. Note, I don't use co2 :P
http://www.pbnation.com/attachment.php?postid=107939

[Puckz]

My "dead sexy" RT

http://home.earthlink.net/~mike031/RT_Pics/DCP00752.JPG

http://home.earthlink.net/~mike031/RT_Pics/DCP00753.JPG

http://home.earthlink.net/~mike031/RT_Pics/DCP00754.JPG

http://home.earthlink.net/~mike031/RT_Pics/DCP00755.JPG

[cphilip]

Update of the cphilip Eclipse Mag at this point...

http://albums.photopoint.com/j/View?u=193146&a=10953897&p=53731428

[homer3dfx]

Me gun

http://members.home.net/homer3dfx/mag1.JPG

[donggie]

http://albums.photopoint.com/j/View?u=1748607&a=13466459&p=53930617

http://albums.photopoint.com/j/View?u=1748607&a=13466459&p=53930619

http://albums.photopoint.com/j/View?u=1748607&a=13466459&p=53931271

http://albums.photopoint.com/j/View?u=1748607&a=13466459&p=53931274
http://albums.photopoint.com/j/View?u=1748607&a=13466459&p=53931276



Hope this works

Don

[-§on-]

Booyah- Just to Help you out....

http://pic2.picturetrail.com/VOL8/113086/213344/4280512.jpg

http://pic2.picturetrail.com/VOL8/113086/213344/4280509.jpg

http://pic2.picturetrail.com/VOL8/113086/213344/4280506.jpg

[fenris69]

here she is Micro GFX000611
er...nope pics too big. until I resize heres the link to a couple thumbnails.



http://members.home.net/fenris69/

[SIGSays]

BTW the crossfire stub is for sale and it's brand new, i should've gotten a emag i could have prbably saved money too

click the link in my signature

[-§on-]

Fenris69's

http://pic2.picturetrail.com/VOL8/113086/213344/4301315.jpg

[cphilip]

jimmyjobobs Mags:

http://albums.photopoint.com/j/View?u=193146&a=10953897&p=54011271

[jimmyjobob]

.......and the ugliest trigger guard in town. thanks for the help phil.

[Xugg'420]

".......and the ugliest trigger guard in town. thanks for the help phil."

ive seen worse it dosn't look that bad......

[-§on-]

This Is XspyX's New Setup, I think its pretty Ni-Nice!

http://pic2.picturetrail.com/VOL8/113086/213344/4309627.jpg

http://pic2.picturetrail.com/VOL8/113086/213344/4309623.jpg

Chrome...(drooling) drip...drip...

[PsychoMag]

http://www.angelfire.com/extreme2/archangels/images/Jam097.jpg
...this is the gun...I have never shot the stock barrel, but that is how i show it...I think it looks intimidating that way. I usually shoot with my 12"AA barrel
http://www.angelfire.com/extreme2/archangels/images/rt_side_2.jpg
....nice clear closeup on my rig...doesnt look the same now...but she is sweet...

[shartley]

martlet1:
I love that Marker! It is just my style… minus the flamed drop forward. I would personally use a standard drop forward but the same red color. But other than that, SWEET.

Yes, I would suggest a Warp Feed. The Hopper does look a bit “overpowering” in the overall look. I would personally go with a Red Warp Feed and a Black Hopper. Again this is just MY personal style. I think with a Red Hopper it would simply be a bit too much red and the black Hopper would balance the effect…. It would also help bring attention TO the other Red Parts. I just like a good balance in overall color design.

But yes.. great looking Marker! Can I have it? (j/k) No, serious… Can I have it? (No, really I am just kidding.) Actually, yes… can I have it? (heehee)

[-§on-]

What happened to Marlet1's gun pic?

[shartley]

Good Question!!!!

[-§on-]

http://pic2.picturetrail.com/VOL8/113086/213344/4327070.jpg

http://pic2.picturetrail.com/VOL8/113086/213344/4327067.jpg

[XspyX]

Where's the gun that SHARTLY was going GA-GA over? I wanna see now...:cool:

[shartley]

XspyX:
I don’t know. But actually YOU have a nice Marker too (although I would lose the long barrel personally). ;)

This guy’s just happen to catch my eye. It had the right amount of Red VS Black, and it was VERY balanced aside from the red hopper on top.

I hope he gets it put back online.

Sure, I have seen better posted, BUT like I said, his just tripped my trigger. LOL But would look even SWEETER (yah, I know... it should be more sweet. LOL) with the modifications I suggested. heehee

[Mr. -RushY-]

I too like the style of marlet1's gun. I actuall have a micromag rt thats blue and black annoed. I have basically the same thing but w/ a blue and black motifie(*sp*)

[shartley]

Mr. -RushY-:
Yes, blue would look great too. Like I said, it was the balance of color that did it for me. Not too much of either, pretty even. Very sharp. :)

[martlet1]

http://users.clas.net/~martlet1/lauren/aug/DSC00032.JPG
Sorry, i removed my post this afternoon. Somehow I screwed up my ftp and it went blank, so I waited until I got home to fix the post.

The flip side has red microline on it. I just bought this thing, so I'm getting used to the trigger ect. It needed some o-ring work in the valve, and now it jams!

I have the original piece that was on the gun before the flame cradle, but I like the on/off. So its kind of a trade off.

[Puckz]

The colored and black rev halves dont fit too well together... just giving the heads up.

[blembiggity]

http://www.hunting-pictures.com/members/inkhigh/BLEMBIGGITY.jpg

here is my phatty

[Bad Dave]

Here ae some pics of my z grip rt with warp feed and interface installed.

<img src="http://www.hunting-pictures.com/members/BadDave/Rim00057" width=600 height=400 border=0>

side view
<img src="http://www.hunting-pictures.com/members/BadDave/Rim00038" width=450 height=300 border=0>

side view

<img src="http://www.hunting-pictures.com/members/BadDave/Rim00047" width=450 height=300 border=0>
cool armson barrels

<img src="http://www.hunting-pictures.com/members/BadDave/Rim00070" width=450 height=300 border=0>
profile, note interface cable
<img src="http://www.hunting-pictures.com/members/BadDave/Rim00105" width=450 height=300 border=0>

me

[-§on-]

http://www.hunting-pictures.com/members/inkhigh/BLEMBIGGITY.jpg

[Prezents]

This is before it was "WARPED"
<img src="http://www.lewistown.net/~santa/tbone1.jpg">

[deweasel697]

I like the yoshimag, the red goes good with the chrome, what kind of barrel is that on the second pic?

[Prezents]

The little short barrel is a Taso Eliminator that I picked up on eBay, really quite for a short barrel but not the best, I would rather shoot one of my J&J's over it any day.
Prezents

[Paintballer86]

Here is my baby... Hope ya like it -Son-
http://www.hunting-pictures.com/members/Paintballer86/warppic.jpg

[speedballbanks]

is that an e-conversion or just a square grip if it is a square grip can you tell me how you made it ????? thanks

[LeadBasedPaint]

Prezents:

You don't like your eliminator? I love mine!! I have an 8.5 inch, and it look freakin awsome on my minimag. It only sticks out about 2 inches past the shroud. Excellent for speedball. I am still building my mag; I will post a pic of it as soon as its done. Here are the specs

Chrome Minimag
Nickle 8.5" taso eliminator
12" Dye aluminum
Crome shocktech drop-forward
Air America Vigilante

maybe an eclipse splash kit
maybe electro trigger (still haven't decided which one I want. suggestions?)

[Prezents]

Yes I agree that it does well on a speedball field. I also have a 10 inch J& J stainless that I love to play with also and I get much better accuracy with it.
My barrel of choice is my, in this order
12" ss j&j
12" cermaic j&j
14" ss j&j
10" ss j&j
12" ss Dye
14" Al Dye
8.5" Taso
12" Z-Rock
As you can tell I am kinda fond of J&J Barrles:D
The bad thing is that I Have a J&J 14" stainless on my Tracerr pump gun also,,,,=barrel cost more than the gun lol:rolleyes:

I do shoot different barrels in a day and the Taso is always on Yoshi at one time during the day.
Prezents

[Rrok]

Marlet1, that red nights micromag is my dream gun! (With a z grip and red warpfeed of course.) That is the coolest mag I've ever seen!

[LeadBasedPaint]

On Yoshi? Is that your gun's name? I haven't named mine yet.

[LeadBasedPaint]

-§on-

what is that thing that is between your grip frame and your drop forward? I need one of those to make my drop forward hang lower. It is hitting my reg and I can't screw it (drop forward) on all the way.

[Prezents]

That is a custom dropforward that I made and then I sent it to PK Selective and had it Chrome plated.
Prezents:D

[LeadBasedPaint]

Darn. Looks like ill have to use washers to get the clearance.

[Prezents]

What I started with was bare metal rod, 1/4" x 1/2"
Then you need to figure what you need to mount on your trigger frame, I went with 1 7/16" very back to where I start my drop.
The total length of the drop is 2 1/2" and again 1 7/16" for my bottem line adaptor.
What I mainly did was have my compressed tank close at hand while making it and I was able to get it as close as I did.
Prezentshttp://www.mauisun.org/ubb/smilies/cwm9.gif

[LeadBasedPaint]

I don't have the tools to do that, but thanks anyway.:)

[krafty]

My minimag has gone through a minor transformation, so it's time to put an updated pic up. After 7 years of shooting co2 on remote I've finally made the jump to hpa. It's not finished yet, (still want a foregrip and I'm not sure I'm happy with the KAPP setup yet) but here's the Grape Ape v2.0 :

http://www.novagate.com/~kraftwerk/paintball/grapeape1.jpg

[SIGSays]

what;s the vieloader power series?? anything different from a regular 12v revvy?

[-§on-]

Its just an older revy

[krafty]

:p You're kidding, right?

The VL 2000 Viewloader Power Series was the predecessor to all the Revolutions. It's actually a 2nd generation 9v powered loader (the first generation were the kidney-shaped hoppers). That baby right there is close to 7 years old. Still works like a charm, although as I get better and better at shooting fast, I've noticed I can start to outshoot it. It feeds about the same as the current 9v revolutions, but is way, way waaaaaaaaaaaaaaaaay pre-BE. :cool:

I'm currently shopping around for a new loader, but I'm going to hang on to this one as a backup. It's been a workhorse and has never, ever failed me. (Except when I forget to put a fresh battery in...)

[xmetal2001]

I have a power series, it works fine except it drains the battery's even when turned off...

[p8ntballa]

blembiggity, what kind of foregrip is that?

[CoFFeY[NiTrO]]

I should (hopefully) be getting the pictures once we get our freaking batteries for our digital camera :D

[-§on-]

I want this to Stay at the Top! Move it to the Tech Forum and Make it a "Classic"

[Smokee_2_7]

here's some long overdue pics of my guns. . . the second from the left is my friend dj's. HEs here on AO, but post less than i do. . . And i cant remember his screen name.
Anyway, ill try to get some better ones up - - w/ pics of my angel, too. by the way, the cocker on the far right is up for sale, if anyone's interested.

[Load SM5]

Originally posted by Smokee_2_7
by the way, the cocker on the far right is up for sale, if anyone's interested.

Ha! That did'nt take long.

How's Mobile treating you? It's not the same up here at NAPB without you. You accounted for almost half the mags on the field.

[-Xugg-]

My mag:
http://www.hunting-pictures.com/members/-Xugg-/Image3.jpg

[GOREHAMMER]

RT with z grip intellifeed hook up.. dye drop forward.. Kapp dropzone II.. JT slammer system.. warp feed.. smart parts barrel.. AA 114/3000 raptor.




http://www.geocities.com/GOREHAMMER1/GUNS.html

[Load SM5]

My E-mag

[Smokee_2_7]

well man, Mobile treating me great. I got to come up to NAP about a month ago and play for real. . (it was fun. . . dj and brent and myself got all decked out in jerseys: as opposed to our normal shorts and tshirts from reffin'. ) I still love shooting the cocker, its up for sale for 2 reasons. 1. Ive got to generate some more cash to pay for the 2000LCD that i just got (hehehe. its pretty funny-- ME, mr. automag, actually playing with an angel. .. almost funnier than that when i showed up with the cocker and everyone's jaws hit the floor.) 2. I wanted to do so much to that gun, but, i realized that by the time i was done with it, it would have cost just as much as a SFL, and i like the vert feed, smaller body, and ano. job better anyway. . . so ill just get an sfl later.

Dont get me wrong. . .the automag is still my favorite gun. I played with it last time for a couple of games, and i can still do alot ore damage with "my baby" than i can w/ the super techno slick angel.

Anyway, to be sure i keep in line w/ the pic thread, here's a closeup pic of my z-grip mag w/ the eclipse splash kit. Im waiting for my kapp foregrip extender to come in so i can slap on the matching foregrip.

What do you guys think?

[gimp]

Man. I want a z-grip. I wish I had money.

[Load SM5]

Glad your doing good.
I could have sworn you would have become an E-mag owner before an Angel owner but I'd love to see your's when you come up next. Email me the next time you head this way and I'll throw on my jersey too. Jeffwall@pclnet.net.

Nice Z-grip mag By the way.

[Smokee_2_7]

well, i pretty much did swear that id never own an angel, but you know how i am. . . it was just like w/ the cocker. . . i got a really good price. . . and it was just an offer too good for me to pass up. . i could sell the thing on ebay and make a couple hundred bucks, if i wanted. I just might do that in a few months. Ive got my heart set on an SFL Emag. Talked to matt davis (did you ever meet him?- - played his first game of paintball at NAP. Plays {played?} for the jax warriors.) he works for bad boyz toyz now up near chicago. He helped danny love on the final milling design of the sfls. anyway, i called him up at work the other day, and chatted a little bit about the gun. Additionally, he's gonna be coming down for the mardi gras open in febuary, so im definitly gonna be heading over to new orleans to hang out and check everything out- - if im not playing that is. met a guy who has played mardi gras for the past 2 years and he invited me to play with him. . and do that tourney, and maybe vegas, and also the world cup. lol. i love to do it. . id be kinda nice to get my butt PROFESSIONALLY kicked.

here's another close up pic: this time of my baby- - the shiney mag ive been playing with for like 4 years now. its not the best quality, but its the most recent.

[Load SM5]

That shiney one was always my favorite.

Never got to meet Matt. Would have liked to.

[Smokee_2_7]

hey, do you have aol instant messenger? or icq or msn, ect?
if so, my aol screename is smokee27.

ahh.. .here's the older pic of the shineymag. That purple line was from where the reflected sunlight threw a curveball to the digital camera . . .lol. shows just how shiney she is.

[Load SM5]

I tried to send you an IM..no response. My IM is Load SM5

[Rrok]

Hey gorehammer, what did you do to your pf to get the plug in the top? Or am I just a loser and that body was specifically made to do that?

Rrok

[GOREHAMMER]

Nothing has been done to it. Its the extended powerfeed plug that comes with the warp which allows the balls to feed properly in that setup





http://www.geocities.com/GOREHAMMER1/GUNS.html

[CoFFeY[NiTrO]]

Heres mine :D

[LeadBasedPaint]

cphilip,

Where did you get the vert. mag body in your pic? That thing is BEAUTIFUL!!
I want one!

[LawFox32]

Hey Smokee_2_7

what kind of x-chamber is that on the middle left mag?

[SIGSays]

your mag doesn't show

[SuperOrangeTicTac]

http://www.hunting-pictures.com/members/deftones166166/copy.gif

there we go

[CTG]

Sorry about the Angel. But you should have a backup.

[Dubstar112]

Hes gotta halo....

[SIGSays]

how'd you get a halo? or did you just put a rev in a halo body?? lol

[SuperOrangeTicTac]

where did u get the HALO? AHHHHHHHHHHHH :)

[Monsta]

wtf ...how?

[SIGSays]

and he has 3

[-Xugg-]

*droool.........http://www.overgrow.com/edge/images/smilies/biglaugha.gif

[Smokee_2_7]

No expansion chamber- - - I use only nitro. What youre asking about is actually a benchmark foregrip w/ twist locking barrel plug.

[the123]

Talk about envy.
my guess is he has either invented the Halo or has something to do with production of it.
So, as a mag user, would you like to help a bunch of 'fellow mag owners' out with a pre-sale of the HALO to all of us here on AO? and what is MSRP?

[zads27]

this custom 22" barrel made my paintballs heat-seeking, which flew a completely flat trajectory out to 1100 meters.
:rolleyes:

[zads27]

i actually (used to) play like this for a few wooded rec games.
when i did this, it usually meant you would see me flag running (i'm a track and field runner too, that's why i wanted this).. fun stuff
oh, and that's a lazer sight right above where the foregrip usually is.

edit: changed to smaller picture, don't want to eat up too much space

[zads27]

last one, i promise.
here's my two markers:

[MikeCouves]

Haha 1100 meters...wouldn't that be great? I sure would want it. That's some nice markers up there guys...I must say. Got to get a pic of mine.

[Cha0tic]

1100 eh? my 36" sniper barrel with 12x zoom would take that on any day. :)

[Cro§§ƒire]

:D

[LCDmag1]

My mag and my Brothers Angel.

[LCDmag1]

Sorry heres the pic had to make it smaller.

[Deadeye]

Here's mine, as of now...

http://a8.cpimg.com/image/CE/38/6279118-04b4-01570200-.jpg

[Mr. -RushY-]

Nice Micromag Cro§§fire, I have one myself. I'll get a pic up here soon, your blue and black annoe looks more vibrant then mine, maybe my camera just sucks

[BartManSr]

My first gun, seven years ago, and it's still ticking.

[Mr. -RushY-]

Here's an old pic of my micromag

[SuperOrangeTicTac]

unF INTELLIFEED :DDDDDDDDDDD

[Monsta]

Not my gun ...but i'll give it a post.


Bling Bling on this! lol :)

<img src="http://www.geocities.com/Pipeline/Dropzone/5675/pics/Mag-LHV.jpg">

<img src="http://www.geocities.com/Pipeline/Dropzone/5675/pics/Mag-RHV.jpg">

[Muzikman]

Here is one of my Guns. This is my PumpMag. I will post more as I take better pictures.

http://pittsburgh-music.com/paintball/pumpmag/images/picture15a.jpg

http://pittsburgh-music.com/paintball/pumpmag/images/picture04a.jpg

http://pittsburgh-music.com/paintball/pumpmag/images/picture02a.jpg

[-§on-]

Put this back as a sticky please! well a classic...

[Mr. -RushY-]

Indeed we need a sticky, the more people see it on the top of the first page, the more people will post in it!!

[X-Plosive]

I think we have too many classics. It's fine here. By the way that quick 6 AGD changer looks pretty cool.

[TylerDurden]

Ok heres me and my dad's minimags-

heres my dads

http://www.hunting-pictures.com/members/Bicycle/gun1.jpg

heres mine

http://www.hunting-pictures.com/members/Bicycle/gun5.jpg

http://www.hunting-pictures.com/members/Bicycle/gun3.jpg

sorry about the darkness--cheap camera

[~Backdraft~]

This should be on the first page...keep posting pictures!

I'll get an updated picture of my gun, I need to borrow a camera from someone though... **cough***-son-***cough****

;)

[Muzikman]

Before...
http://pittsburgh-music.com/paintball/typhocker/images/minicocker03.jpg

After...
http://pittsburgh-music.com/paintball/typhocker/images/typhocker01a.jpg
http://pittsburgh-music.com/paintball/typhocker/images/typhocker02a.jpg


Er...oh..sorry..this is an Automags forum...here...

http://pittsburgh-music.com/paintball/magrt/images/magrt02a.jpg

:)

[X-Plosive]

ummmm it appears as if MuzikMan is a thief and ganked a towel from the Hampton Inn.

[Muzikman]

Just rememeber..those are two different towels...

It's great having over 25,000 HHonor points:)

[PigSweat]

MuzikMan, what are the mettalic parts on the side of your cockers' body?

[Muzikman]

One side is the LP reg and the other is the ram. The 4way is in the grip and it has a pivot trigger. You notice there are no pneumatics on the front of the gun.

[redrider87]

my new mag

[krafty]

Next update... Intelliframe and ReTro Valve. Just looking for a foregrip to round out the package.

[SIGSays]

here

[michekee]

My killer gun!:cool:

[p8ntballa]

Hey krafty, pretty soon i plan on selling a black Smart Parts gadget grip(you know with the barrel plug), would you be interested?Keep in mind i did say SOON, not sure when.

[Vacuum-Boy]

Check it!

[Manuel_FZR]

Here is my little Lady! A polished/pantherblack Metallic painted MiniMag. In the foto, the pantherblack-painted looks dirty, but in real it glitters ;)
Old setup wit CO2 ... new pics with Flatline, DYE-Grip to come ... :cool:

http://www.manuelknorr.de/Mini05.jpg

that´s all ... ;)

[polorboy]

Hey, here is my mag. I can finaly get it up. I am going to send it in for a upgrade soon.


http://www.strictdesigns.com/other/mymag

Nice paintjob huh :D :rolleyes:

[polorboy]

http://www.strictdesigns.com/other/mymag/

[shartley]

Try this...
http://www.strictdesigns.com/other/mymag/MyAutoMag.jpg

You kept putting just the directory name, and forgetting the actual graphic file name. :) it is MyAutoMag.jpg

[polorboy]

Why didn't it work for me?

[shartley]

You kept posting the image location without the actual image file. Your URL only pointed to the directory it was IN, and when you go to that location it pulls the picture up ONLY because the INDEX file for that directory contains the picture in it.

When posting the picture you can not post the HTML file (which is what is being posted when you only go as far as listing the directory), your URL for the image MUST contain the actual image file as the last part of the location.

I hope this helps.

EXAMPLE:
You kept using this....
http://www.strictdesigns.com/other/mymag/

when what you needed was this....
http://www.strictdesigns.com/other/mymag/MyAutoMag.jpg

[CoFFeY[NiTrO]]

Heres my mag.....i have a blue cp barrel for my second barrell now and jah just made me a custom drop...

[Dubstar112]

http://www.hunting-pictures.com/members/Dubstar112/asdf123.jpg

http://www.hunting-pictures.com/members/Dubstar112/asdf1.jpg

some more crappy pics

[absocountry2]

Here she is

I didn't mean to tease you guys. I am just lucky enought to get to help test to marker. It is an early production model but they are really close to getting enough for everybody and world release. You will all be happy with it

[SuperOrangeTicTac]

Originally posted by absocountry2
Her she is



nice nice nice, when did they become available and where did u get it from??

[absocountry2]

I am in The USAF stationed overseas. Still here, got it here.

[SuperOrangeTicTac]

sweeeetttt

[DarkPhoenix]

I always wanted to post on this thread....

[polorboy]

Check out the new Smart Parts chrome barrel :D.

http://www.strictdesigns.com/Other/MyMag/Assets/Mag2.jpg

Let me know what you thinks I should get for it. I am up for suggestions :).

[SIGSays]

some sort of foregrip.....
no remote..... get a drop if you want..... that's about it.....lol

[speedballbanks]

hey absocountry2 can you post some pics of your gun with the hopper on it iam interested into how you got it setup

[absocountry2]

I will take some pics of it this weekend and post it setup. I am going to dye the warp this weekend, it really needs to be red.

[~Backdraft~]

That modular body e-mag is really sweet! Hopefully i can get some pics up this weekend.

[MicrOMag]

Please drool

[MicrOMag]

God lord, this is my baby...I'll try to get some more pics up with the matching tank too

[MicrOMag]

Here's a close up, sorry about the pics I didn't realize I had my digital camera set on the lowest quality, I shall fix that tonight when I take pics with the matching tank and tank cover on.

[Hexis]

Minimag w/ ReTro SN GFX10536 (ReTro Number 536)
Original AIR Valve SN MM12159
Original Green AGD Main Rail
KAPP Chrome Vert ASA/Gas-Through Grip
DYE Chrome DOuble Trigger Frame/Trigger
KAPP Green ALum 45 Grip Pannels
Polished Alum PF Plug (for looks, Parabolic for play)
J&J 10" Two Piece w/ Green Front
DYE 10" SS
Taso 8.5" Nickle Plated
J&J 8" Hardchrome
AGD Warp Clear
12volt Clear Revolution (old style, original board)
AA 114/3000 Armageddon SN A4879 (used remote)

Not used very often, but fun to have around:
AA Wispering Death CO2 Expansion (just in case)
AutoResponse 45 Trigger Frame (w/ Clear DYE Stickies)

http://www.visi.com/~mjb/FullMagKit.jpg

[ZeroXtreme]

:D

[StanBo]

Here is my gun. To quote Al Bundy. "You can't clean it. It works better with last summers leftovers in it!"

I love my gun but I think I am going to have to switch from Co2. It is becoming too hard to keep up with other players when they shot hot guns and HPA.

[Bonx0007]

Why hasn't this post been put on the classics list yet?

[SIGSays]

it was unclassicfied a while ago././././

[PigSweat]

Prob. due to the Gallery on the main page

[2000Sabre]

http://people.ne.mediaone.net/peter-simmons/images/peters_rt1.jpg

RT Pro
CP Flame Drop Forward
PMI PE2001 Regulator
Stock barrel

Powder coated by Ken Wenlasky of K&P Customs

[ProjectMag]

Soon to have warp feed

[LuisV]

Nothing special... but here is a pic of my current mag and case. The case is a Pelican 1600 and as you can see from the pic it holds my mag and warped df, a revy, 2 spare batteries, a Vlbow, my ND 68ci Tuffskin, a barrel plug and it has tons of space left over:

http://home.earthlink.net/~lvazquez/mymag2.jpg

http://home.earthlink.net/~lvazquez/case2.jpg

[cphilip]

cphilips new E-Mag

http://albums.photopoint.com/j/View?u=193146&a=10953897&p=55783017

[LuisV]

cphilip... Nice... real nice...

[Manuel_FZR]

Originally posted by LuisV
Nothing special... but here is a pic of my current mag and case. The case is a Pelican 1600 and as you can see from the pic it holds my mag and warped df, a revy, 2 spare batteries, a Vlbow, my ND 68ci Tuffskin, a barrel plug and it has tons of space left over:


Hey nice case (and of course nice Mag too) ;)!
How did you cut the space for Mag, bottle, ... and what material is it?

[LuisV]

Originally posted by Manuel_FZR


Hey nice case (and of course nice Mag too) ;)!
How did you cut the space for Mag, bottle, ... and what material is it?

Thanks for your kind comments.... The Pelican case comes with 2 layers of "cubed cell" foam, a final bottom layer and a top "egg crate" style foam; therefore 4 layers of protection. The "cubed cell" foam is a series of rectangular shaped "cubes" that are perforated together. It allows you to "pick and pluck" the desired shape of the cutouts. I traced all my equip on paper and cut them out, then tooth picked the paper templates in place and began to "pluck" the little cubes out. I constantly double checked durring the process to avoid mistakes. Once I was done I sprayed 3M glue adhesive in between the 2 layers of "cubed" foam so they wouldn't come apart nor shift in transit. You can find more info on Pelican cases here:

http://www.pelican.com/main.htm
http://www.pelican.com/product/cases/1600case.htm

http://www.cases4less.com/

Be aware that the case is rather expensive, but the build quality is awesome!! They are waterproof and airline proof cases!!! You can also purchase replacement foam in the event your configuration changes. Personally I bought my case on Ebay for almost half of what it goes for on-line:

http://search.ebay.com/search/search.dll?MfcISAPICommand=GetResult&SortProperty=MetaEndSort&ht=1&query=pelican+case

Cases4less is a good dealer with good prices and shipping times. Hope that helps... :)

[Manuel_FZR]

LuisV: Thanks for that interesting answer. Now I think, it´s the ultimate case! ;) I have to save first the money for a RT ... and then for the case ;)

[PigSweat]

Yeah, Pelicans are nice. But danged heavy! 'Specially full of gear

[krafty]

Well, it's finally done to my satisfaction. I had to notch out a bit of the first 'hump' in the benchmark foregrip to get it to fit with the Intelliframe, but it worked well, and you can't see the bare metal unless you really look closely. (Shoulda done that BEFORE it went to redrider... my bad!) Dremels are good! Heck the black Intelliframe even looks purple under the right light! Woo hoo!

Also you can see that I got the intellifeed mod working. I've got to reposition the switch a bit, so it engages sooner in the pull... but it works well.

[cphilip]

Originally posted by PigSweat
Yeah, Pelicans are nice. But danged heavy! 'Specially full of gear

Yes And for that reason I went with the Pelican 1610 for mine. It has wheels and a handle like a luggage case. And its about 2 inches deeper but same other dimentions as the 1600. I just put the E-Mag in mine but need to get some picts up of it. I can leave the warp and tank all on and a slot for the barrels still remains. The extra depth allows this. Its three faom layers deep instead of two.

[LuisV]

Originally posted by cphilip


Yes And for that reason I went with the Pelican 1610 for mine. It has wheels and a handle like a luggage case. And its about 2 inches deeper but same other dimentions as the 1600. I just put the E-Mag in mine but need to get some picts up of it. I can leave the warp and tank all on and a slot for the barrels still remains. The extra depth allows this. Its three faom layers deep instead of two.


Cool... I can't wait to see a picture!!!! :)

[cphilip]

Luis here is a teaser photo to hold you over. Its a bit dark and is the case itself not showing the Emag in it but I think you can make out the handle in the up extended positon. I'll get a better one over the weekend.

http://albums.photopoint.com/j/View?u=193146&a=10953897&p=53731412

[LuisV]

Nice... I can't wait to see the inside. So you have 3 layers of "pick n pluck" foam? Or is that 2 "PnP" layers and one bottom foam layer... cause that's what I have!?!? Just curious...

[cphilip]

It has three layers of pluck and pull and an then an egg crate layer about a bit more than an inch to an inch and an half thick in the top and in the bottom as well.

I took out the one layer of pluck and pull (didn't use it) and use the two egg crates and used two of the pluck and pull and it worked real good.

Look at these on this site. Its were I got mine. $169 plus $5 shipping. Good picture of the #1610 at the bottom of the page.

http://www.swpublicsafety.com/pelicancases.html

[Manuel_FZR]

really cool cases! ...not available in Germany :(
I have a toolcase and found some foam that fits good in the case. then I got my cutter and cut my Mini out. The barrel is in a foam material water pipe isolation ;).

[ralicea]

My MicroEmag....

[StanBo]

Cool stand. Did you make it yourself?

[ralicea]

StanBo,

I bought it at a local store.

[StanBo]

Hey I just noticed that you are from Jersey. Could you tell me what shop you frequent?

Thanks.

[ralicea]

StanBo, I get my stuff at MI Paintball in Long Branch, NJ. Where do you go in the City?

[Restola]

http://home.earthlink.net/~restola/auto4.gif

[StanBo]

Originally posted by ralicea
StanBo, I get my stuff at MI Paintball in Long Branch, NJ. Where do you go in the City?

I play at Top Gun Paintball mostly. I went to Paintball Long Island once and plan to stop there again.

I like the level of players at Top Gun but I am getting to used to the fields and I am not learning anything.

My friends and I are going to Top Gun on November 17th. Come play with us if you like!

[Aliens-8-MyDad]

Eh crappy camera... Crappy mag I no but im gonna show it ya I know there isnt a revolution...
http://www.hunting-pictures.com/members/aliens-8-mydad/mymag02.jpg http://www.hunting-pictures.com/members/aliens-8-mydad/mymag03.jpg
Minimag (http://alienmusic.tripod.com/paintball/mymag02.jpg)

[donggie]

http://albums.photopoint.com/j/View?u=1748607&a=13955715&p=56056283
http://albums.photopoint.com/j/View?u=1748607&a=13955715&p=56056287
http://albums.photopoint.com/j/View?u=1748607&a=13955715&p=56056278
http://albums.photopoint.com/j/View?u=1748607&a=13955715&p=56056290
http://albums.photopoint.com/j/View?u=1748607&a=13955715&p=56056292

[gadget68]

My Retro mag with warp, Itelliframe, and warp left body.

[p8ntballa]

My digital cam pics aren't comming out and regular camera pics didn't come out so now i resort to scanning my gun....jsut got the body back friday..

[p8ntballa]

1 more

[CTG]

:D Time for a test drive.

[ZeroXtreme]

The HALO... where did you get the HALO? :confused:

[Load SM5]

Hey, that's Tom's Halo! What are you doing with it?

[CTG]

No, It's mine. Where do you think Tom got his from?

[Load SM5]

Ah, so sorry. I thought the lizard/dino motif was custom made for him. I did'nt realize there was more than one. Very nice setup.

[CTG]

His is a 215 body and mine is the 180. So yes his is the only one like that. But you do need them side by side to notice.:)

[ZeroXtreme]

Can I buy one off you? :)

[CTG]

No, but production should start this month.

[LCDmag1]

So ctg you work for halo? Thats sweet, nice to have you on the forums. Your loader is so awesome from what i have seen. I will be buying one as soon as they are ready.

[Xzion]

My secondary 'mag, this was like Redriders FIRST mag that he did the fade powdercoat to. I apologize for the poor quality of the photo. :D

[ralicea]

CTG,

It that an Xtreme Emag Conversion? I ask becaue of the black grip and battery pack.

[SoupRman]

my gun