PDA

View Full Version : Can a No Rise fit an Automag?


SirLloydAlexander
12-08-2002, 04:22 AM
They say that the bodies fit emags and RT's. Is there anyway to get them to fit regular automag bodies? I really would like one to fit this automag Im working on with a level 10 and an ReTro valve. It would be a wonderful addition, since I've noticed a tremendous reduction in blowback recently with the LX bolt. Thanks for the help.
Blazestorm
12-08-2002, 04:36 AM
http://www.automags.org/forums/attachment.php?s=&postid=535599

Ta da :D
SirLloydAlexander
12-08-2002, 04:43 PM
I was under the impression the body styles were different. I guess not.
Havoc_online
12-08-2002, 05:04 PM
I just checked and they DO fit. The classic rail has a rectangular slot for the body and the Emag rail has a circular hole however the circular Emag/RTP body fits in the rectanglur slot on the AM/MM rail.
SirLloydAlexander
12-08-2002, 05:51 PM
so, If I just bought the RT Pro body rail, it would fit?
toymyster
12-08-2002, 08:41 PM
You can use the RT Pro/ E-mag bodies on the Automag/Minimag rail!! They fit right on without any midification!!
SirLloydAlexander
12-09-2002, 03:37 AM
You really like the exclamations, and thank you very much for the help. You wouldnt happen to be a teacher would you?
Derman2k
12-09-2002, 05:04 PM
Heh...I noticed he uses alot of exclamations too.

Where could I get a no rise?
SirLloydAlexander
12-09-2002, 05:36 PM
same place I am. Right here. When they come in stock. Which should be eventually. They are worth the wait, and their weight in gold.
Derman2k
12-09-2002, 05:40 PM
You mean in the Forum? or the AGD Store?
digitard
12-09-2002, 05:42 PM
So basically, im asking if I'm right, you can use ANY Emag/RT pro/Mini/Classic body interchangeable on the classic rail .... EXCEPT the actual RT body (non-pro) ..????

Thanks for the confirmation,
Dave
Blazestorm
12-09-2002, 05:48 PM
Old School RT's are completely different ignore them for now.

Any current mag body, will fit the classic rail.
Any current minimag/automag body, will not fit the rt-pro, emag, or UL rail without modification

pie :)
digitard
12-09-2002, 05:56 PM
Thanks Blaze, I might have to just change out my body on my classic (although its getting a ReTro valve shortly)and change it to a polished no-rise.

:)

Sincerely,
Dave
RobAGD
12-09-2002, 07:36 PM
Actually you need to watch out that the radius on the round pim isnt hitting the edges on the RT Pro/Emag body. If it does just round down the sharp edges on the rectangle hole in the rail.

-Robert
swamprat33
12-10-2002, 06:52 PM
Looks COOOOL, BUT, what is likely to work best on a standard LX Mag?

I currently have a Level 7 (soon to be LX) PowerFeed Mag and wonder if a low rise will work better or not as well as a PowerFeed body. Also , what is the deal with barrels for one of these bodies.

Thanx
Blazestorm
12-10-2002, 06:57 PM
You NEED a halo-b/eggy 2 or lvl-10 with a no-rise, I cannot stress this enough, he was chopping all day with that body and having feedin problems, you do need a stock vert barrel or you can have someone put a notch in your current barrel
Automagisurdad
12-10-2002, 08:33 PM
ok say im getting an RT valvE and i want to upgrade to the low rise body, do i need to specify about what body i have or are all rt-valves the same? ps- does a freak have the notches for a vertical feed body?, cause thats on my list to.
xen_100
12-11-2002, 05:44 PM
from what I have heard......the freak has to be ordered for HL/HR OR CF. the backs are different and dont have all 3.