Straight trigger frame not 90 he he

[paintballbeaver]

Just wanted some opinons on them if there is any forseable problems mechanically with the frame for the mag and if frygurl reads this would you be willing to make some grips


right now i have the frame designed and its going on the mill tommorow hopefully by wed of next week it will be done also attached some pics tell me what you think

[paintballbeaver]

another pic on a Micromag

[johnny dee]

y would u want a straight trigger frame isnt that gona be kinda uncomfotrable?

[Blazestorm]

Look at the IR3... notice something odd about the trigger frame? Its not a .45!

Because .45's were meant to be held at arm's length, and people hold their guns close to their body... hold your gun as close to you as possible with the ability to still shoot fast, hand kinda crooked eh? with this that won't be as bad :)

[xadamx]

mmmm if you produce that i might be interested in buying one. ive always liked the IR3 grip

[EsPo]

Originally posted by johnny dee
y would u want a straight trigger frame isnt that gona be kinda uncomfotrable?
he obviously never read the whole "z grip theory" thing. it may look very uncomfortable,but it is actually very very comfy. it prolly feels like an ir3, and ir3's feel really good imo.

[johnny dee]

NAH IVE READ EVERYTHING AND SEENWHAT YOUR TALKING ABOUT, I JUST THINK IS AN AQUIRED THING SOMETHIGN THAT U MIGHT HAVE TO GET USED TO, BUT IN ALL I THINK ITS A COOL IDEA....

[FalconGuy016]

I THINK IT IS TOO

[sneakyhacker420]

hook me up with one of these when they go ito production, first check with AGD to make sure you aren't breaking any copyright laws :D

[Cryer]

From what i've read, WDP has a patent on Vertical trigger frames (as on the IR3 Angel).
I like the idea, it's actually something i've been toying with for a while... never produced anything worth-while.
will this fit into dye stickies?
I may be interested in one if that patent doesn't get in your way...

[paint magnet]

Heh, that's why he said "straight trigger frame" instead of "90 degree", because WDP has a patent on the 90, but they don't say anything about a straight trigger frame :cool:

[rikkter]

uh the patent WONT go through.. the angle he is using is 90 degrees..
just because you WORDED it differently doens't change anything...

[Cryer]

What about 91*? :D

[drx975]

Sure why not? Just cant be 90. Ever seen a product thats almost exactly the same thing as another, but something is just a little bit different...?

[SiLeNt X]

looks cool. If you do run those in the near future I want one for a RT.

[pb-afroman]

One suggestion could be to round out the bottom back corner a bit because you are gennerally holding that frame from the bottom...
The only reason I could see it being uncomfortable or at least no different would be because the trigger on the angel is so much lighter, with a hard pull it may not be as comfortable because you have to grip the frame harder to pull the trigger.
Just a few thoughts.

[DirtRider]

you guys are forgetting, on your sketch, there is no place for a trigger rod, and haven't you chot a mag with a z, its easy to get used to and not at all hard to really get on the trigger

[Kevmaster]

Originally posted by drx975
Ever seen a product thats almost exactly the same thing as another, but something is just a little bit different...?


They're called Spyders, Phirranas, Raptors, Rebels, Genies, etc

[DirtRider]

Originally posted by kevmaster



They're called Spyders, Phirranas, Raptors, Rebels, Genies, etc

he said almost the same, not the same with a different logo

LOL

[paintballbeaver]

heres an update pic of the milling so far

[paintballbeaver]

heres an update pic of the milling so far

[sneakyhacker420]

i was thinking... maybe put the trigger on an angle like the z-grip

what about intelli-feed compatible internals? :eek:

[TippmannMan]

interesting. but it doesnt seem very ergonomic. try it. plus there would be less space for your fingers unless you somehow made room for that but that would create unnecessary space. im very excited in seeing how this will turn out.

[SiLeNt X]

nice,very nice

[sneakyhacker420]

have you designed it to work with the standard sear?

[paintballbeaver]

heres a pic of it finished w/o grips on my micro

[paintballbeaver]

another

[sneakyhacker420]

this is totally unrelated, but where can you get the PTP style warp hosing? and for how much per foot?

it looks cooler than the plain black AGD hosing

[TippmannMan]

id buy that grip :)

[paintballbeaver]

about the hose i'm pretty shure you cant buy it any more
we picked it up off a kid for 25.00 wich included a warp bracket and the hose he he he said it was broke we put a little time into it and bada bing just like new

[paint magnet]

How does the trigger frame work? They have 90 deg. Impy frames now, there was a big patent issue with them too but they got it worked out.

[paintballbeaver]

works just like a standard mag frame benck mark style triggers works win put about 1000 shots through it worked mint just finished my double trigger for it i made it a double ring trigger its pretty sweet i'll have to get up pick up prolly wont be till monday......any one got any more questions????

[Sinnet]

compare trigger length/stiffness to stock frame/intelli?


btw, looks AMAZING! great work

[paintballbeaver]

its a very smooth pull i think the intelliframes are a bit choppy in the pull but thats only my opinion

[paintballbeaver]

heres a finished pic w/ double ring trigger think i'll convert it to a autoamg style trigger rather then the benchmark

[paintballbeaver]

another pic