Pump Kits on Sale NOW!!! Go Here>>>

[AGD]

Everyone,

The AGD "Clean Out the Attic Sale" has started. These are the last of the pump kits with minor defects and the pump rod missing. The site is not quite complete, you can't blow up the picture of the one kit or see the blueprint for the pump rod but we are working on that. Get 'em while they last for 35 bucks pluss shipping and handling. PLEASE NOTE these are sold AS IS NO WARRANTEE. You should just plan on using them as a collectible or cool front grip. The pump kits never worked well from day one.

Make sure you check the box on the shipping page that says "shipping address same as billing address"


AGD

https://register.paintballtechs.net/

large pic at:
https://register.paintballtechs.net/pumpkit-640.jpg

[This message has been edited by AGD (edited 08-23-2001).]

[This message has been edited by AGD (edited 08-23-2001).]

[Flamebo]

Cool! But I got an E-mag and sold my other mag, so it'd be useless to me. Have you guys done anything with a new foregrip for the E-mag yet?

[the123]

Woohoo! I can't wait! Now for once I might be able to play a game of pump and have fun.
Thanks AGD!

[salomon16]

SWEEEEEEETTTTTTT!!!!!!Dang i need 40 bucks. Any chance I could get one for free considering my post was the one you said you found them on???? no j/p thanks!!

[salomon16]

oh by the way.. is there any way for any ol' fellow to machine out a new pump rod from specs you could give?? Just wonderin.

[cphilip]

Ok Tom, I went through the process twice and each time got an error message. Double checked everything including credit card info. I want one of them. For a cool fore grip for my back up only. yes it wil be the Stealth Smurf! It says it sent a message to the adminsitrator. What to do? I want it noted I was first to order but couldn't get it to go through. Please hold me one till we get it worked out!

[This message has been edited by cphilip (edited 08-22-2001).]

[cphilip]

So what should I do Tom? I can't get your online order to accept the order. It errors out and appears to be on your end. New system and all I understand but... I want one unit for a foregrip.

[cphilip]

Ok so what do you do when you really need something from AGD? You call Joann in the morning! CST...Thats what you do! http://www.automags.org/ubb/wink.gif Going to sleep now but want it noted I was first! So there!

[Bigzamboni]

Just because you post about it first doesn't mean you were first. Theoretically, someone else could have ordered one before you, and did not receive an error and chose not to post about it... Probably not though.

[Gambit1106]

Like me? I was able to order with no problem sorry cphillip. I can try and order another if it goes thru and you don't get one I'll sell it to you, otherwise I know I can sell it in the classifieds.

[rt_81]

i found it interesting when i read "US ORDERS ONLY PLEASE". whys that tom.

RT

[pharcyde]

US only? can someone buy me one, i'll pay you the oringinal price plus the shipping to me. someone please!! i might throw in a few bucks for your trouble.

or if Tom could hold on to one for 2 weeks then i'll be able to order from the states, from a friend who lives down there.

[This message has been edited by pharcyde (edited 08-22-2001).]

[SHAG]

Hi,

hey Tom... Are you going to have a number of these units availible for sale at Atlantic City? I figure if I am there, I might pick one up http://www.automags.org/ubb/smile.gif If you are not planning to bring these kits to A/C, could you? http://www.automags.org/ubb/smile.gif

Thanks in advance,

Alan


------------------
Paintball cannot be that big. No one has really been able to sponsor a stock car or a race yet. (local people do not count in this case :))

[AGD]

I don't know why some peoples stuff is not getting through. We already have a bunch of orders that came in. I'll have Delaware look into it.

I'll try and bring some kits to AC.

AGD

[Xzion]

Will these work on a Minimag?

[PolarisSX]

I posted in my topic too, but just so it is seen the link to the pump arm specs is not working. I would really appreciate getting a hold of them as I have access to some skilled machinists and would make several for others that ordered. The missing pump arm is the only know "flaw", right? Also will there be any documentation included?
Ok, Ive asked my share of Questions

Later

[PolarisSX]

I'm sorry in the previous post know should be known and I didnt read the first post carefully. Now I noticed it says minor defects. Make mine really minor please http://www.automags.org/ubb/wink.gif

[Tbone]

Tom,
How long until the e-mail confirmation?

[Ground_zer0]

Ok i just tried like hell to order one.. I got 3 error messages in a row http://www.automags.org/ubb/frown.gif Also a bit of information. Only one of the thumbnailed pictures is linked. Luckyily I took a guess and found the address for the large verson of the upper picture is https://register.paintballtechs.net/pumpkit-640.jpg for everyones knowledge the error appeared with both IE and Netscape. *Prays for a good order*

-Matt


[This message has been edited by Ground_zer0 (edited 08-23-2001).]

[This message has been edited by Ground_zer0 (edited 08-23-2001).]

[AGD]

Sorry guys try again tommorow. You should get email confirmation almost right away. Make sure you fill out all the blanks.

AGD

[AGD]

Guys,

You may be getting rejected because you didn't check the box above the shipping info that says "shipping address same as billing address"

Try that

AGD

[manike]

'US Orders only' http://www.automags.org/ubb/frown.gif

No fair! I want one... Tom can you send one over to John & Jackie for me please http://www.automags.org/ubb/smile.gif

manike

[Tbone]

I tried 3 times, and each time if said "Success", but I never received any kind of confirmation by e-mail. Little scared because I really just wanted one, not three! http://www.automags.org/ubb/frown.gif Is there any other way of ordering them?

And yes, I made sure that my e-mail was working and that the address I entered was correct.

[cphilip]

I didn't check that box Tom because I wanted it shipped to my work addy. And filled all that extra stuff out for the different shipping addy. You know one different from the card holder addy. I mean if there is not a choice why is it on there? Maybe that part is what is not working.

FYI Bigzamboni my oder was placed first within a minute or so of Tom posting this notice while the first four or five posters responded so I know I was one of the first few to see it. Went all the way through the sale twice and rejected...I think. It's not clear from the Error message if it was totally rejected. Its says there was a problem and the admin will contact me about it. So not sure what that means. So I was afraid to keep doing it as I didn't want to end up with a bunch of em. Oh well...

[Tbone]

I figured I'll call AGD when I get home from work, I just hope that they know what I'm trying to order http://www.automags.org/ubb/smile.gif

[scarpa43]

i just ordered mine, how are they shipping?
Will i get a tracking #?
Just wondering.

[Ground_zer0]

Ok I got my pumpkit ordered.. the world is right once more. I pray that these get shiped with U.S. mail cause my billing address was a P.O. Box and i had to have it shiped to the same one. Also whats with geting no credit for finding the missing picture link http://www.automags.org/ubb/wink.gif Thx everyone, especially AGD.

-Matt

[Bailey]

I dont have a credit card http://www.automags.org/ubb/frown.gif

[DryIce]

me either
=(
I use my bank account on paypal http://www.automags.org/ubb/frown.gif
Anyway AGD would take paypal orders ? http://www.automags.org/ubb/smile.gif

------------------
http://www.galaxy-pc.com/mag <---my automag

http://www.galaxy-pc.com/mag/wiringdiagram.jpg <--- Warpfeed Intellifeed diagram

[SHAG]

Hi,

Muzikman. Yeah I was just going to note that myself. The newer bodies are about the width of a sear for the bolt and the reails are not even cut for the pump slot and Back Bottle adaptors. Like tom says this is good for a foregrip. For those with older bodies and rails then it might be worth converting over to a pump

Later,
alan



------------------
Paintball cannot be that big. No one has really been able to sponsor a stock car or a race yet. (local people do not count in this case :))

[Tbone]

Thanks Tom and AGD for putting the post for the pumps on AO http://www.automags.org/ubb/biggrin.gif We all appreciate it!

[emaggot4life]

THANK YOU AGD.

I have been wanting another pump kit for a friend of mine now it will be a great birthday present. I dont like the fact he is getting his for $35. lol

[CDN_Drew]

Tom

I was just wonderng what can be done for myself and others who do not reside in the US. I live in Canada and would like to get a pump kit. Should i contact directly ? What should i do ?



------------------
Andrew Bates
Executive Member
Canadian Contingent Paintball Club
Ottawa, Ontario
www.canadiancontingent.com

[Sobaco]

My Sydarm is already cut for the pump and the body rail is also! Now to fab. a rod.....

[Peanut The Paintballer]

Just ordered my kit! Thanks Tom!

[Gambit1106]

My question is............Has anyone received a e-amil notification? I ordered last night and it liked everything but, I never got a notice. Anyone........?

Darren

[Sobaco]

Got mine instantly.

[Xzion]

hrm, since nobody seemed to notice my question, will the pump kits work on a Minimag?

[Muzikman]

Yes, but it falls under the same problems as I stated above.



------------------
Jason "Muzikman" Beam

68 Automag
68 Automag (Pumpmag) w/ 6-Pak+
Automag RT
Sydarm

http://www.pittsburgh-music.com/paintball

[Paintcheck]

Hello All,

The order form is now 100%, and the photos have been added to the site. There was an issue before when the shipping address was different, but that has now been fixed. I am happy to report that many orders are going through without issue. If you want one of these pump handles, I would act quickly.

John McKown
Delaware.Net

[Muzikman]

For the people interested...

This is my best knowledge of the pump kit. So, If anything I say here is wrong, then please correct me.

There are a few things that your mag needs to have in order for this pump kit to work. When I got my kit, it came with a new rail. This rail has a groove that is milled in the top from the front to about halfway past the sear. The groove has a slight rise in it near the sear, which is not as deep, and it acts as a ramp. Tom did not mention if this rail comes with the kits. If it does not, then you will need to mill the groove. This groove is where your pump rod will lay.

The other thing that your mag will need to work with the pump kit is an enlarged sear slot in the main body. I do not have the dimensions of this opening, but I will measure it when I get home and post it. Older mag bodies has this larger opening. Since all my mags are 7 or 8 years old, I do not know what the opening looks like on a newer mag, but I do know it is smaller. This opening is so the pump rod has a way to slip into the body and push back the bolt.

Although I have not looked yet, I am sure the pump rod can be made out of the correct gauge piano wire. Since I bought a few of these kits, I plan on making pump rods for them. If I can successfully do this, I will make quite a few and sell them to anyone who might need them. Depending on the cost of the wire and how long it will take to make one, I think that $5 would be a good price.

If you want to look at pictures of a pump kit and some of the internals, take a look at my site. I plan on some time this week finishing this site with picture captions and an explanation of how the pump kit actually works.

http://pittsburgh-music.com/paintball/pumpmag/

------------------
Jason "Muzikman" Beam

68 Automag
68 Automag (Pumpmag) w/ 6-Pak+
Automag RT
Sydarm

http://www.pittsburgh-music.com/paintball

[This message has been edited by Muzikman (edited 08-23-2001).]

[AGD]

Pump kits will fit on Minimag. Email notification should be almost instant.

AGD

[AGD]

Sold 6 pump kits here at the Atlantic City NPPL event. Thanks to Maverick for stopping by!

AGD

[Dragoon]

I have 2 on their way to me.

Thanks for digging up these hard to find items!

[squall]

I was smart and ordered one of these after the agd email went down... does that mean my order did not get to AGD?

[This message has been edited by squall (edited 08-27-2001).]

[squall]

up

[AGD]

The pump kit orders are at Delaware not AGD so your order went through fine. You should have a confirmation email.

TK

[Muzikman]

Hmm..
I ordered 2 and didn't get an email reply...so I ordered 4 more the next day...I might end up with 6 total http://www.automags.org/ubb/smile.gif Thats not bad..but...



------------------
Jason "Muzikman" Beam

68 Automag
68 Automag (Pumpmag) w/ 6-Pak+
Automag RT
Sydarm

http://www.pittsburgh-music.com/paintball

[Gambit1106]

I finally got my e-mail today. WOO HOO!!!! I placed the order 5 minutes after the post went up. I was getting worried, now I feel better.

Darren

[AGD]

up

[squall]

I received an email bounceback yesterday (8/30) on my order. It looks like it was trying to make it to office@airgun.com, so AGD make sure you check those. Thanks!

[AGD]

Time to bring this back up. We will probably leave this sale on for another week then that's it.

Yes the kits will fit on the MM.

AGD

[Sobaco]

How close are you to selling them all?

[azzkikr]

ok so if I order one of these what will I need to get and from who could I get it in order for the kit to work on my mag? thanks AZZKIKR

[emaggot4life]

you will need:

1. Pump Rod
2. Small Bumper
3. Modified Body Rail
4. Modified / or made after 1995 Body

As far as where you can get them good luck. I am having a friend make mine from my current pump kit (I have had one for 3 years)

[OldSchoolMag]

Muzikman, are you serious? I mean, if you CAN GET THIS TO WORK... sheesh... I know about 10 people who drool over the thought of a pump-mag... wait, I'd make 11 http://www.automags.org/ubb/wink.gif
But, if you can create the parts, I'll definatly buy one, if not put a 99.9% chance of me doing so on the line.
Also, to all of my friends ordering one of these, if you DO happen to market the pump rod, you can be assured they'll all have your site address!!
Post soon please!! I need to know before I order!! Thanks SO much!!

[OldSchoolMag]

Also, as a thought, could this work (if at all) on the ReTro Valve? And, if it could, would it produce any effect, knowing that the Reactive Trigger only works for semi-fire. Forgive me if I sound stupid, I got out of the sport a year ago, and am just now making a strong re-entrance.

------------------
******************************
68 Classic w/Powerfeed
Smart Parts Magic Box Installed on A.I.R.
Green Small Bore All American 12"
KAPP Air Through Grip & Drop Foward
67ci 3000psi Chubby Nitro
9volt VL
AGD user for life
******************************

[Chaos]

I have 2 of the old school pump kits all complete, I can recreate the parts. Parts that are required for a full working pumpkit are as follows:

Bolt Spacer*
Bolt Spacer Spring*
Modified Body
Modified Body Rail*
Pump with internals and rail to attatch to body rail*
Pump Rod*

*parts that are in original pump kit, I'm not sure what is included in these but I know tom said these dont come with the pump rod. You most likely can bend a hanger el cheapo style to work as the pump rod, but I'd suggest a metal dowel bent correctly. I'll see if I can make some. Also the bolt spacer is easily made from cutting a stock bolt spacer, the only problem I could see is reproducing the bolt spacer spring, which is a very strange wavy thing, and if it isn't included I dont know how to make one but I'll see if I can find something similar that will work.

------------------
~ChAoScLoWnZ
chaosclownz@magcentral.org
MAG CENTRAL (http://www.magcentral.org)

Ever felt like picking up a knife and stabbing yourself, just to see what it'd feel like? Welcome to my world.

[OldSchoolMag]

Reproduce all parts, eh?

What's next, free of charge?

*Racous laughter... dies down*

No, seriously.

*Uncomfortable silence*

Hello?

[Muzikman]

Well, I plan on making the pump rods. I have not spent the time to do this yet as I am packing to move and most of my gear is getting covered in moving boxes. http://www.automags.org/ubb/smile.gif You will still need to find the correct body and rail. I bought 4 or the kits, and I just might find someone to mill me a few body rails, but I'll tell you now, if I do this, the price of he rails will be quite high.



------------------
Jason "Muzikman" Beam

68 Automag
68 Automag (Pumpmag) w/ 6-Pak+
Automag RT
Sydarm

http://www.pittsburgh-music.com/paintball

[OldSchoolMag]

From what I understood, you only needed the pump rod which is what's missing from the kits, or at least what I inferred. Now the body, what do you mean by that? I plan on putting the full pump-kit together, and then locating my friends new Automag PF (bought in 2000) and using that body and those internals.

What else do I need after a new 'Mag PF and the pump kit, basically?

------------------
******************************
68 Classic w/Powerfeed
Smart Parts Magic Box Installed on A.I.R.
Green Small Bore All American 12"
KAPP Air Through Grip & Drop Foward
67ci 3000psi Chubby Nitro
9volt VL
AGD user for life
******************************

[Muzikman]

Ok, I'll repeat myself. This is from an earlier post.


<font face="Verdana, Helvetica, sans-serif" size="2">For the people interested...
This is my best knowledge of the pump kit. So, If anything I say here is wrong, then please correct me.

There are a few things that your mag needs to have in order for this pump kit to work. When I got my "Original" kit, it came with a new rail. This rail has a groove that is milled in the top from the front to about halfway past the sear. The groove has a slight rise in it near the sear, which is not as deep, and it acts as a ramp. Tom did not mention if this rail comes with the kits. If it does not, then you will need to mill the groove. This groove is where your pump rod will lay.

The other thing that your mag will need to work with the pump kit is an enlarged sear slot in the main body. I do not have the dimensions of this opening, but I will measure it when I get home and post it. Older mag bodies has this larger opening. Since all my mags are 7 or 8 years old, I do not know what the opening looks like on a newer mag, but I do know it is smaller. This opening is so the pump rod has a way to slip into the body and push back the bolt.

Although I have not looked yet, I am sure the pump rod can be made out of the correct gauge piano wire. Since I bought a few of these kits, I plan on making pump rods for them. If I can successfully do this, I will make quite a few and sell them to anyone who might need them. Depending on the cost of the wire and how long it will take to make one, I think that $5 would be a good price.

If you want to look at pictures of a pump kit and some of the internals, take a look at my site. I plan on some time this week finishing this site with picture captions and an explanation of how the pump kit actually works.

http://pittsburgh-music.com/paintball/pumpmag/
</font>

Better?




------------------
Jason "Muzikman" Beam

68 Automag
68 Automag (Pumpmag) w/ 6-Pak+
Automag RT
Sydarm

http://www.pittsburgh-music.com/paintball

[OldSchoolMag]

Why, yes - thanks for making things simpler for us lazy people!

Also, I'll probably shoot you an e-mail later on with more info, based on what is said here by Tom and those in direct contact with the NEW pump kits.

Also, Tom, would the kits include everything with the exception of the pump rods? Just need to clear a little delima up!

------------------
******************************
68 Classic w/Powerfeed
Smart Parts Magic Box Installed on A.I.R.
Green Small Bore All American 12"
KAPP Air Through Grip & Drop Foward
67ci 3000psi Chubby Nitro
9volt VL
AGD user for life
******************************

[AGD]

They have everything exept the rod and the smaller bumper.

They do have the wave spring.

AGD

[OldSchoolMag]

Ah, thanks. What could we fashion to take the place of the bumper? Also, there'd be no milling required, as in the rail, correct?

------------------
******************************
68 Classic w/Powerfeed
Smart Parts Magic Box Installed on A.I.R.
Green Small Bore All American 12"
KAPP Air Through Grip & Drop Foward
67ci 3000psi Chubby Nitro
9volt VL
AGD user for life
******************************

[Muzikman]

I now have 4 of the pumpkits that they where just selling, none of the 4 have rails. And again, you have to watch to see what size sear opening you have in your body.




------------------
Jason "Muzikman" Beam

68 Automag
68 Automag (Pumpmag) w/ 6-Pak+
Automag RT
Sydarm

http://www.pittsburgh-music.com/paintball

[OldSchoolMag]

Well... I'm just really confused now. I'm gonna call my local airsmith on Tuesday and see what he can work out, he's got a great rep with 'Mags. Thanks to all who helped:)

------------------
******************************
68 Classic w/Powerfeed
Smart Parts Magic Box Installed on A.I.R.
Green Small Bore All American 12"
KAPP Air Through Grip & Drop Foward
67ci 3000psi Chubby Nitro
9volt VL
AGD user for life
******************************


[This message has been edited by OldSchoolMag (edited 09-02-2001).]

[azzkikr]

up with this

[azzkikr]

how could I make the bumper that is missing? is it the same thinkness as the one already in the mag behind the bolt. later AZZKIKR

[Muzikman]

You can use the original blue bumper. I have used it by mistake before.

[rjvemt1]

are any of these still available?

[xmetal2001]

Wow, you really brought this back from the dead.:eek:

[Rocp15126]

Nope, none avaible from AGD. There was a thread around here about having some made up by a shop. Try a search in the forums, otherwise Good Luck! I got one back when they first came out , I still use it now and then in rec ball pump games.

[HoppysMag]

AHH!! are they sold out? the links tom gave us bring me to the intella Frame and a pic of the pump kit... but no order form!

[Tactical Neural Implant]

AGD stopped making them. I'm not quite sure why? I guess it causes problems with certain peoples mags. The only things I've noticed is it cannot autotrigger, and if the pump is slightly out of position it can cause firing problems. AGD will give you the dimensions and drawings if you ask for them I believe. It consists of a special rail with a groove, a pump arm, pump arm rod, a black spacer/bumper, and this funky spring. Keep searching, someone may sell one occasionally, and then like I said before someone is trying to get a production run made at an outside shop. Good Luck!