Hey Tom look here! [Archive] - Automags.Org Online Forums

Snake847

12-24-2002, 10:38 PM

Hi I along with many people have been trying to find some blueprints or drawings of the body and body rail for the pumpkit so that we can cut the newer parts to fit the pump kit. It would help alot if you could provide these prints or let me stop by the factory and borrow a body and/or rail that you are throwing away with the slots and measure it

yeahthatsme

12-24-2002, 10:50 PM

if you go to www.airgun.com and then the tech support area there is a diagram somewhere with all the demensions you need.

Snake847

12-24-2002, 10:53 PM

I looked through all the diagrams and all i found was one pic and it had no picture of body. 1 pic of rail but measurments at all.

Snake847

12-25-2002, 01:25 PM

up!

Snake847

12-25-2002, 09:33 PM

up!

petefol

12-26-2002, 12:26 AM

i dont know if you did, but if you search i remember a recent thread where someone posted an annotated drawing of the pump rod (or whatever piece doesnt come with the kit)

Snake847

12-26-2002, 12:30 AM

I don't need the pump rod. I need the Rail and body with pump holes in them.

Snake847

12-26-2002, 09:49 PM

UP!

AGD

12-26-2002, 11:35 PM

Tough problem, ask me again after the new year we are just to busy with end of year stuff right now.

AGD

Snake847

01-04-2003, 03:22 PM

UP!

Snake847

01-06-2003, 11:47 PM

UP!

Eric_AGD

01-07-2003, 08:16 AM

Here are the pump slot dimensions for the mainbody. The dimensions are the same for an Automag body.

Snake847

01-07-2003, 08:29 AM

Thanks! Expect to see me stop by AGD to pick up one of those X-Valves!Now all we need is the rail.

Eric_AGD

01-07-2003, 09:03 AM

Here is the rail. I think everything you need is here, if not let me know.

Snake847

01-07-2003, 11:55 AM

Thanks!

ezrunner

01-07-2003, 12:07 PM

Are you building a cocker mag?

I would love to see the mag done with a larger diameter
powertube and an lp pnumatic set running the bolt.

How cool would that be? You get the speed of a dumpvalve
system with the characteristics of the cockers.

Tie a ram to the pump arm, and
a solenoid to an lpr and go!

I wanna build one now....:-)

If you are interested lmk, I have a slugg body I'm working on and an RT valve and 2 rails as well as an intelliframe.

I think that I can put the solenoid and morlock board in the grip and actuate the switch by the sear, like intellifeed.

Hmm..... this is looking easy to do!.

-rob

ezrunner

01-07-2003, 12:08 PM

AHHA!

With the RT valve, mount the 3way/4way (shocktech bomb)
in the grip, vertically and hinge the actuator rod at the
sear or use an angled slot, then the rt can actuate the
3 way w/o short stroking.

Then it can stay mechanical, and still have the speed.

This could be really cool.

-rob

Snake847

01-07-2003, 12:09 PM

LOL no. These are cutting specs to fit the pump kit to the newer body and rail for automags!

ezrunner

01-07-2003, 12:23 PM

but who wants to actually pump it?

that is what pnuematics are for, ask Glenn Palmer!

:-)

-rob

Snake847

01-07-2003, 01:02 PM

Why would you put penus on a mag? If you want it to be semi just take the pump rod and the spring behind the bold off and you got the semi mag.

the123

01-07-2003, 01:45 PM

Guys- i know of a place with those old rails IN STOCK. They are out of black however.
As for the mainbody, you can probably pu an ad up on the forum looking for one. Lots of people swapped out their original mainbody for a powerfeed or warp or no-rise.
PM me if you'd like to know where to get some...
Brian