Question about no rise body...

[SlipknotX556]

Is it really worth getting? Like my high rise, I get a decent amount of hopper hits, I was wondering if I should get it, or just get a power feed body.

[E==Mag MAN]

Yeah it significantly lowers it. But its only lowered a inch maybe a little more i dont know for sure. You could just have the body you have cut and the bell lowered by someone. There are willing techs on the board who can do this for you.

[FalconGuy016]

I never really understood low rise bodies. Is it just where the hopper is lower?

[Evil Bob]

It was designed with the HALO in mind since it performs better with a shorter ball stack. If you have a HALO go for it.

-Evil Bob

[RetroEclipseMan]

Heck as long as you got Lvl 10 you're good. I got one on my retro mag with Lvl 10 and 12v Revy with X-Board and it works just fine. Really drops the hopper down to.

[FalconGuy016]

Is this for vertical feed only?

[Kevmaster]

its a vertical feed, yes

[petefol]

the no rise (with a halo) is designed to be also as tall as your mask would be if it was sticking above a bunker, so your vertical profile wouldnt be any bigger then it has to be.

[AlabamaMan]

it's not as tight as a warp body by anychance, but it's alot tighter than a high rise body.

[Dern]

for the price of a no-rise body you could just buy a Warp kit, which is the best! :D

[petefol]

Originally posted by AlabamaMan
it's not as tight as a warp body by anychance, but it's alot tighter than a high rise body.
what do you mean by tight?

[fire1811]

i have a no rise body and i love it. i have it on a retromag with intelli and i can rip on this gun, i still have not had one problem with misfeeds or chopping. yes i have a level X and im feeding the beast with a rico.

i have tried it with a revy and have had misfires but never with the rico. im sure the halo would be the same as rico(or better but too much $ when ricos are free 8)

the only complaint i have about the norise is the cheap *** allen screw they put into it to tighten ur hopper down
i stripped it the first time i tightend it, and no i wasnt crankin it down. but just go to hardware store and buy another type of screw. i love it if ya got the $ buy it if ya dont like it im sure u wont have a problem sellin it

[AutoMaggot]

Maybe you just need to learn how to play your bunker better.:rolleyes:

[fire1811]

yeah i suppose but if you can lower ur hopper and not have any bad effects why not do it!!

[Cryer]

Hey fire-
Where did you vind that ultralite barrel?!? I've been looking all over for good (but inexpensive) vertical feed barrel. I have a J&J ceramic, but i don't like it.

[fire1811]

its not a true cf barrel its a hopper right hopper left i just milled the hole in it for cf. it easy to do and only takes 5 mins. just take ur body off line up the barrel in the feed and mark it threw the hole. just be advised if u do this u can no longer use the barrel for hopper right.
there is no need to special order a barrel and pay even more then they charge u 8)

[fire1811]

i just sold true cf dye boomstick for 70$ shipped u should have bought that lol

[JEDI]

Originally posted by SlipknotX556
Is it really worth getting?

Two words: YES.


http://www.deadcell.cc/adam/NitroMag222.jpg

Shorter ball stack. Faster feeding. Lower profile. Add a Halo to your set up. You'll have a paint slinging machine.

[Cryer]

Originally posted by fire1811
i just sold true cf dye boomstick for 70$ shipped u should have bought that lol

That's my luck, tho. Oh, well.

[FooTemps]

I think no rises are sweet... IMO, they look better than high rises.

[EsPo]

go warp if you dont want hopper hits.