theraidenproject
01-20-2003, 08:45 PM
After a long wait (maybe a month, month and a half) my EMag finally arrived.
-If you know where (besides the CP site) to buy just backs for CP barrels, please LMK
http://www.hunting-pictures.com/members/theraidenproject/EMag%20on%20trap%20door.jpg
http://www.hunting-pictures.com/members/theraidenproject/Emag%20right%20side.jpg
http://www.hunting-pictures.com/members/theraidenproject/Emag%20left%20side.jpg
To the safety Nazis, there was no paint, the ASA was off, it was in e-mode with the batt off, the powerfeed was off, there is no air in the tank, and it wouldn't fire anyway, cuz it's broke
It came with a car and wall charger, original superbolt, CP 2 piece and J&J Ceramic barrels (both 14"), and a long piece of SS with a proconnect. I clean everything (there was a good amount of paint in and on the emag) gas it up, and immedately fell in love with the trigger. It was already dark out, so I decided to wait until the next day to shoot it. The next morning, I gas it up, and it shoots fine with paint. Then it stops firing and starts leaking out the barrel like crazy. I start a Tech Forum thread and called the seller, and following both of their advices, I got an RT Parts kit. I took apart the valve, changed just about everything, put it together, and it still didn't work. I lost 1k (out of 4k) psi trying to fix it, and I was playing on a friends's property the next day, so I needed to conserve air. The next day, I used up the rest of the air, so now I can't fix it. As soon as I can, I'm taking it to a store and getting it fixed.
Here's what I plan to do to it:
IMMEDIATE
warp left body (already have a warp, but hose isn't long enough to use on the HL body)
hook up warp and revvy to emag battery
NEAR FUTURE
Level 10
sell barrels and get a J&J edge kit (or keep CP 2-piece and buy the rest of the backs)
timmy63 blade trigger, or Odyssey trigger, or Manike trigger, it depends on price, and what's out when I'm in the market
LONG TERM
milling on body rail and grip frame (like pito189's emag), or give them both to tysonmachado and let him go crazy
black to green fade
dye warp shells black to green
clear grip panels (or maybe with some logo or something, I dont know)
matching or clear halo B
Tunamagnum board
Extreme body and ACE (or maybe, at this point, put stock parts on, sell it, and just get a new XMag)
-If you know where (besides the CP site) to buy just backs for CP barrels, please LMK
http://www.hunting-pictures.com/members/theraidenproject/EMag%20on%20trap%20door.jpg
http://www.hunting-pictures.com/members/theraidenproject/Emag%20right%20side.jpg
http://www.hunting-pictures.com/members/theraidenproject/Emag%20left%20side.jpg
To the safety Nazis, there was no paint, the ASA was off, it was in e-mode with the batt off, the powerfeed was off, there is no air in the tank, and it wouldn't fire anyway, cuz it's broke
It came with a car and wall charger, original superbolt, CP 2 piece and J&J Ceramic barrels (both 14"), and a long piece of SS with a proconnect. I clean everything (there was a good amount of paint in and on the emag) gas it up, and immedately fell in love with the trigger. It was already dark out, so I decided to wait until the next day to shoot it. The next morning, I gas it up, and it shoots fine with paint. Then it stops firing and starts leaking out the barrel like crazy. I start a Tech Forum thread and called the seller, and following both of their advices, I got an RT Parts kit. I took apart the valve, changed just about everything, put it together, and it still didn't work. I lost 1k (out of 4k) psi trying to fix it, and I was playing on a friends's property the next day, so I needed to conserve air. The next day, I used up the rest of the air, so now I can't fix it. As soon as I can, I'm taking it to a store and getting it fixed.
Here's what I plan to do to it:
IMMEDIATE
warp left body (already have a warp, but hose isn't long enough to use on the HL body)
hook up warp and revvy to emag battery
NEAR FUTURE
Level 10
sell barrels and get a J&J edge kit (or keep CP 2-piece and buy the rest of the backs)
timmy63 blade trigger, or Odyssey trigger, or Manike trigger, it depends on price, and what's out when I'm in the market
LONG TERM
milling on body rail and grip frame (like pito189's emag), or give them both to tysonmachado and let him go crazy
black to green fade
dye warp shells black to green
clear grip panels (or maybe with some logo or something, I dont know)
matching or clear halo B
Tunamagnum board
Extreme body and ACE (or maybe, at this point, put stock parts on, sell it, and just get a new XMag)