View Full Version : On/Off ASA Rail system?
x86assembly
01-28-2003, 07:18 PM
I'm trying to find a on/off asa and rail combo which will allow me to mount the asa directly to the bottom of the grip frame. Anybody using/know-of a good combination?
I was particularly looking at the cp on/off asa, and noticed they have a rail, does anybody know if these two things work together? Thanks in advance for any input.
Rail (http://www.customproducts-az.com/rail-dropl.htm)
on/off asa (http://www.customproducts-az.com/on-off-asa.htm)
Blennidae
01-28-2003, 07:50 PM
I can't say 100% that they will work together but they should. The dovetail parts are fairly standardized. I have a KAPP dovetail on/off and it has fit on my dye/warped sportz/shocktech/KAPP dovetail drops.
covadsucks
01-28-2003, 08:24 PM
The Rail may not allow the on/off to be tightened or loosened depending on the application needed. You may be better off with a CP Micro Drop which is only an inch forward and maybe 3/4th's of an inch down. Just a suggestion as I wanted to do the same thing, but instead opted for a CP Razor drop.
You might want to check out www.checkitproducts.com as they make a simple on/off that bolts directly to the bottom of the gripframe. Best of luck in your search.
x86assembly
01-28-2003, 09:41 PM
Originally posted by covadsucks
You might want to check out www.checkitproducts.com as they make a simple on/off that bolts directly to the bottom of the gripframe. Best of luck in your search.
Thanks alot, that looks like it'll work perfectly
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.