Warpfeed on a cocker?? ANYONE HAVE PICS??

[T 22 M]

does any one have a pic of a cocker with warp feed on it ??

[boomerfoxtrot]

I don't have a pix, but at the field I ref at, this man showed up with an old cocker with warpfeed on the side of it....
strange looking if you ask me....

[FeelTheRT]

i have a pic of my old Cocker hooked with a Warp however it seems like hunting-pictures.com is down.

[Richter]

look through the world cup pictures on warpig. they have a warp feed breach vertibrae cocker there somewhere.

[Muzikman]

http://pittsburgh-music.com/paintball/typhocker/images/typhocker07.jpg

[ArthurDent]

you sure thats a cocker under there? i dont see any frontals...

[spazzed]

hehe.. if Muzik says it's a cocker, trust me, it's a cocker ;)

[Kevmaster]

at AOSC it was a blazer(well, typh-cocker really), maybe its a cocker though now :D

[Doc Nickel]

Here's a prototype I whipped up recently. The body's been milled and is out to anno now. I'll have finished pics up shortly.

Doc.

http://www.docsmachine.com/galleries/warpcocker.jpg

[Muzikman]

Yeah, it's a cocker...

Before:
http://pittsburgh-music.com/paintball/typhocker/images/minicocker01.jpg


After (without the loader):
http://pittsburgh-music.com/paintball/typhocker/images/typhocker08.jpg


Kev, BTW, it was never a Blazer, it's just too big;)

I still want that Warp Cocker body that Doc has there.

[ezrunner]

Wow doc, you never stop.

That is cool I don't see why a cocker w/ a revvy isn't
ok, but that is a cool way to warp one :-).

ADDED: Oops... props to doc!
I just realized his 4way is
a pneumatic solenoid.... :-)

With a maxflo and an electro
cocker w/ a warpfeed, that should be a fast gun!

Muzikman: I like the typhocker, I mean, how many palmerized
cockers are in circulation?

We just need to put a race frame on it. Then it would surely be
one of a kind and you could give that warp a good workout.

-rob

Doc - did you ever do any more
of those blocks for the rainmakers?

<img src="http://parlweb.parl.clemson.edu/~rclong/gunpics/racemerlin2.jpg">

[BajaBoy]

tom i think u would like a halo more, i was talking to jorden and he said he loved mine and is gettin one.

smoke would look good on your gun. (u should post pic of her)

[Muzikman]

Originally posted by ezrunner
Muzikman: I like the typhocker, I mean, how many palmerized
cockers are in circulation?


Well, there are two that I know of. Mine and someone at the Palmer shop made one for himself.

As for the RACE frame. My next cocker, which I am trying to figure out what body I want to use will be a RACE'd reversed cocker. I am looking into how to mount the LP reg under the barrel.

[ezrunner]

Hey, if you wanna do a custom
gun on aka stuff lemme know.

We can hook it up :-)

The aka front block bolt takes a reg.

It is tapped for 1/8 npt and has a plug. You pull the plug and
pop in your reg.

-rob

[Muzikman]

Wait?? Your kidding me? Do you have a pic of this?? And how much meat can I take off the front block before I would start hitting the air passages? I was giving serious thoughts about a Merlin body, but I didn't want the front block and the fact that the vert ASA is part of it threw out that idea. But if it's already tapped for it then I would have less work to deal with.

[magmonkey]

I have put a couple warps on cockers for people around here and I intellifed them by tapping the bever tail and mounting a roller type microswitch behind the back block so when the block comes back it actuates the switch and puts the power to the warp

[Muzikman]

Same idea I used with my Typhocker (see pic above), except I had the ability to use my "pump" rod to actuate the switch.

There is also a company out there that has a system that uses LP air off the 4way to actuate the Intellifeed.

[beefstew]

want a nutzy warp placement on a cocker?
take off the bevertail put warp plate on with the bevertail,
and twist the warp as far as possible twords the backblock without it hitting the hopper.
back heavy?
yes
odd and fun?
yes:D :D :D