PDA

View Full Version : SFL'ers or X-mag'ers with the ACE, I have a question.



Load SM5
02-06-2003, 07:48 PM
I just got my SFL back from AGD with the ACE and on/off switch (yay me), but I have a few adjustment questions.

You drop a ball in the breech with the sensitivity down and turn it up until it fires? Is that correct?

Which way is up or down on the sensitivity?

Anything else I should know about this?

Thanks

Dayspring
02-07-2003, 01:44 AM
RTFM. :D

(Love ya Load!)

BlackVCG
02-07-2003, 03:10 AM
Yes, you adjust it with a ball in the breech.

Clockwise is more sensitive and CCW is less. Pretty self-explanatory.

Havoc_online
02-07-2003, 03:13 AM
clockwise - more sensitive
counter-clockwise - less sensitive

put the safety on so it doesnt actually shoot, just listen for the solenoid.

edit* *douh, should have used my SuperSpeed...:p

Load SM5
02-07-2003, 08:23 AM
Ok guys, thanks. That's more or less what I though, but wanted to make sure before I went nuts with the wee screwdriver.

Havoc-work on those typing skills;)

Dayspring- um...what?

Dayspring
02-07-2003, 12:32 PM
Read the f'n manual. :D

Load SM5
02-07-2003, 01:20 PM
I don't have an f'n manual, you tard.
:p
It's an upgraded SFL. It did'nt come with one.

RamboPreacher
02-07-2003, 01:38 PM
ther's an adjustment? I just use mode 2 or 0.

Load SM5
02-07-2003, 01:50 PM
If you look on the side (side with the selector switch) of the gun, you'll see a tiny 1/8" hole with a flathead screw in it. Mine is under the breech and forward a bit, I assume yours is in the same place. This adjusts the eye sensitivity for different colors of paint.

RamboPreacher
02-07-2003, 03:21 PM
Ahh, haaaaa - I found it! woohoo, something else for me to mess up.:

Havoc_online
02-07-2003, 04:03 PM
For two color paint, insert the paintball dark side down into the breech, adjust until the gun fires. Then turn clockwise 2 full turns.

Load SM5
02-08-2003, 02:10 PM
Ok, if the idea is that the gun fires when paint is breached and does'nt when the paint is'nt, I have a question. I dialed down my ACE until the gun will not fire with a ball in the breach. I turn up the sensitivity until the soleniod just clicks. I take the ball out and the soliniod still clicks. What have I missed?

I'm using clear hoppers and currently bright orange shelled Nelson Anarchy, if that matters.