Maximum's 2K Micro Mag

[maximum]

Here is a update Picture of my Micro 2k in progess...

Newest Pictures are at the Bottom!

Things Coming:

Tank back from Hydro (End of the Week) ?



Almost Ready to play! =)


- Maximum

[EsPo]

once you recieve intelli/xvalve this thing will be SUHWEEET!!!

[joeyjoe367]

I think you could use a little bit of drop-forwarding :) maybe a teeny dye one or something... 68cui tank, right?

[maximum]

Actually as you were posting i was Ordering =).. I just order a mid Shocktech Drop, Ordered it in blue. Think im going to get a BLUE halo B , and Blue '03 Stickies to go along with it..

- Maximum

[Fatjon]

Man thats nice. It will shoot like a dream with intelli and xvalve. Do you have lvl 10?

[maximum]

Lets up this for a couple views

[Python14]

If you can, while you are at it, get your freak back annoed blue. It would be very nice

[davidb]

I have seen pictures on AO of Sticky 3's that were put on Intelliframes, seemed to fit properly, and then ripped down the back. I would strongly urge you not to put the new stickies on there. Get regular Stickies.

[maximum]

David,

I had seen some posts about that, and already had ordered them, but PBgear was out of Stock so I e-mailed them and told them to send me Regular ones. I dont know which ones i am getting. So if it the '03 i will probably just cut the backs off.

Thanks

- Maximum

[madmatt151]

That's shiny...... doughnuts.......

[Krazy Ivan]

Originally posted by Fatjon
Man thats nice. It will shoot like a dream with intelli and xvalve. Do you have lvl 10?

X-valve has lvl 10 stock bro..

Definetly nice gun. Looks kinda funny without the valve and tank, but I wouldn't mind it!!

[Bulldog]

Very nice, gotta love the micros. Just for info though, the Halo powers right through the micro detent. The stock spring just isn't strong enough for all that pressure. Again, nice gun.

[maximum]

Originally posted by Bulldog
Very nice, gotta love the micros. Just for info though, the Halo powers right through the micro detent. The stock spring just isn't strong enough for all that pressure. Again, nice gun.

Thanks for the Info. I actually ordered a Blue Revvy w/vortex impeller. I couldnt find any BLUE HALO's and I didnt feel like waiting.

- Maximum

[maximum]

Stickies Ripped so i Cut the back off.. Still looks good.

- maximum

[maximum]

The Back


- Maximum

[personman]

Nice!!!!
You just gotta love Micro Mags!!
Especially yours, its really nice.. I think Xvalves were ment for micros :)

[maximum]

Im starting to like it more and more as the parts come in..

I hope UPS hurries up. Anxiety is getting to me.


- Maximum

[maximum]

My X valve finally came today!.. Pics When I get home.. My Shocktech Drop and Revvy are delayed till Monday.. So lots more new Stuff Next week!

Peace


- Maximum

[maximum]

Other Side

[maximum]

Well I have almost Everything now except for my Tank. It should be back from Testing Friday..

[maximum]

Another one...

[maximum]

Intelli Feed Pics

[CLICK_666]

hey maxi i gave u the idea for the intellifeed like that ill use that and post some pics im glad my idea turned out great :) dont forget to give credit wehre its needed

[redlaser666]

Great looking micro!
I would sugest replacing the electrical tape with heatshrink tubing for a cleaner intelifeed wire.

Keep it up!

[WARPED1]

I now have a project micro(payin tommorow).I bought an LX already,I want an Iframe and a Warp next.And a ReTro valve...............

[PsychoBaller]

I was never a fan of the MicroMag.... (more a fan of the MicroCocker, had one yrs ago, PTP Red FX Micro).


But that is one hot MicroMag..... and it seems like everyone but me is getting an Xvalve... I can afford an SFL Emag and a Scepter Kit amoung things, but cant get an Xvalve, lol

~da "someone donate one to me" baller

[maximum]

THanks for the comments and compliments. YEs I will be re-doing the Intelli Feed wire.. I had initially cut the wire according to how the online instuctions were, then realized there was room in the revvy for the jack, so i had to splice the wire together to get up there.. So after i get everything together I will take one last pic.


- Maximum

[gibby]

Originally posted by WARPED1
I now have a project micro(payin tommorow).I bought an LX already,I want an Iframe and a Warp next.And a ReTro valve...............
Jim!! A Warp? I thought you didn't like warps? Nice buy though!!

[WARPED1]

I don't like them much,but it seems the teams winning are using them:p!Plus if I ever decide to sell,they sell good. I'm all about performance. I was going to buy that black one(micro) off a differen't AO'er,but buying my Angel upgrades would've pushed me over budget:(, I'm sorry to that guy.

[maximum]

Ok i re-soldered my I-Feed so I have one wire going from the frame to the jack and no more Electrical tape. So its a nice "Clean" Install! =)


- maximum

[Wheelman]

very nice, I'm jelous and wish I'd never sold it after seeing those (j/k), good luck man!

[Dueydog]

I have the medium Shocteck, Freak, foregrip, intelliframe, X-Valve, black Rev, but use a Centerflag 201 (68/4500) tank. Plan to get an EVO II and Flatline tank. Maybe a X-mag!!!

Later,
Matt

[Dueydog]

Later,
Matt

[maximum]

I was going to put money down for a X mag this friday, but after shooting myself in the leg with a BB and going to hospital I wont be able to afford it for a couple more weeks.

How do you like your Micro? I absolutely love mine. Definately will stay around for awhile!.

- Maximum

[ben_JD]

Originally posted by maximum
...after shooting myself in the leg with a BB and going to hospital...You did what? That is just about as bad as wearing pink paint all day long.

[maximum]

I like how i look in Pink! I dont like how this BB feels in my leg tho..


- Maximum

[logamus]

Originally posted by maximum
I like how i look in Pink! I dont like how this BB feels in my leg tho..


- Maximum

your goggles shure looked smashing with pink on them. ;) thats a bummer with the bb, at least you had it pointed at your foot and not your face.

btw, as good as your micro looks on here, its even better in person!

[maximum]

Logamus. Thanks. Too bad it was covered in Pink most of the time also =).. I had a blast tho.. Cant wait to play with y'all again.


- Maximum

[Jason Stearns]

Nice gun.

[maximum]

Thanks Jason. I just got a E-Micro yesterday and i will have pics as soon as it gets back from the anodizers.

- Maximum

[WickeDKlowN]

Nice. I just picked up a Satin Black MicroMag body.

[Brak]

that gets my vote for the bestest micro EVER. you should consider rigging it with SS hose, it will go very very well with the chrome

[*ArKfEaR*]

dump blue 2k3 stickys replace with smoke/black/clear ones.

[maximum]

Originally posted by *ArKfEaR*
dump blue 2k3 stickys replace with smoke/black/clear ones.

Thanks but no thanks.. My hopper is blue and my drop is blue. I like the blue on Chrome. Plus this marker will be up forsale soon.

- Maximum

[JT2002]

howd u manage to shoot yourself?:D

[maximum]

I didnt make sure my bb gun didnt have any air or bbs in it, and i was just holding it in my lab pointing at my leg. Then i pulled the trigger, and i heard it shoot. I was like sh*t there is air in there then looked my leg and realized i had bbs in there also! =) I tried to push it out, but it was in there deep.. Went to the ER got a shot and they left it in there .Then i got 2 bills totaling $890. BS!

- Maximum

[JT2002]

wow. $890? hows that possible, are you going to argue it? that sounds huge for 2 simple shots, unless they were like miracle elf shots:D u know like the one each long balling cocker gets before it leaves the factory:D

[maximum]

Yeah it was definately ridiculous.

Just going to the ER was $200
X ray was $200
Tetnis Shot was $100

Then tax on all of that.

Then i got a Bill from the Doctor just for him looking at me for another $2xx.

I am paying $150 a month now until it is paid off.

- Maximum

[CLICK_666]

thats bull**** id kill em all
and are the bbs still in ur leg? or like u shot urself in the leg? and they bounced off opr sumtin

[JT2002]

dam. i gotta get me one of them dokter jobs! :D what did he charge u, $100 a minute? btw how old are you?;)

[CLICK_666]

Originally posted by maximum
YEs I will be re-doing the Intelli Feed wire.. I had initially cut the wire according to how the online instuctions were, then realized there was room in the revvy for the jack, so i had to splice the wire together to get up there

uhh i gave u that idea :P

[maximum]

Originally posted by JT2002
btw how old are you?;)

I am 20. 21 on May 4th.



- Maximum