Sending in Automag for level 10 installation

[Vengeance]

Does anyone know if sending in an automag to get level 10 installed is the best way to go? I figure AGD can do a better installation job than me, and I have the means to do to send it in. Anyone know if they do a better job than a makeshift installation?

[FalconGuy016]

You should do it yourself it would be the same

[Xerces]

its not really hard to install, it just takes some time to get it tuned the way you like it.

[spazzed]

Only difference is they've done it before ;)

You'd be better off doing it yourself, it'll give you some experience with it, which you'll need to tweak it as everything beaks in :D

[Kevmag]

I don't consider my self very mechanical, but I was able to install Lvl 10 on 2 mags. After retuning after my first day of playing they continue to work fine.

Make sure you have your tank full. You'll lose quite a bit of air when tuning L10. Read the instructions carefully and take your time. Again make sure you have plenty of air.

[minimag187]

Im only 14 and I installed level 10 on my old mag, worked like a charm with no chops. You should do it yourself.

[yeahthatsme]

it took me five days to install my inteli-feed connection, and 10 minutes to install my level 10. i say you should do it yourself so you are familiar with how it is set up.

[Miscue]

http://www.automags.org/~Miscue/level10.mpeg

Right Click -> Save As

Installation is easy... even I can do it. :)

[rdb123]

I remember Jon telling me that AGD has a 25 dollar Level10 installation fee; it was waived in my case since I've got an SFL though.

-Ron