How heavy is your full gun-setup?

[56kSomeGuy]

Finally I have finished my set up(maybe a new barrel later) and I weighed it. When I did I was shocked to see that my whole setup weighed a little over 10 pounds(micro-e, barrel, evo II, drop, and 88/45 crossfire). So this made me wonder is my gun heavy or is this the average weight of a set up.

So I would like to know your set-up and how much it weighs without paint.

[LawFox32]

my setup is heavy as a beast; which normally isn't a problem b/c I should the marker real hard so it doesn't seem heavy then, but other times its a beast

[Cliffio]

well my 91/45 maxflow makes it alot heavier than it should be

[AlabamaMan]

Last time I put it on the scale it was between 9-10 lbs. That was Rt-Pro stock warp + revvy + 68/3k flatline. Since then I have done some milling and currently i'm trying to find a new forgrip. So hopefully I can get it down to less than 9 lbs.

Aluminum shavings = good
http://www.automags.org/forums/showthread.php?s=&postid=665172#post665172

[EsPo]

gun in sig = 12 lbs+ its all because of that big arse apoc reg

[nicad]

machined down micro mag, lightened hyperframe, homemade aluminum valve, palmers reg, 10" AA barrel, tiny dropforward: 1 lb, 15 oz.
this is everything except hopper and tank. for those i run a gutted revvy intellifed off the hyperframe, and a little 45/45 crossfire.
i think the totoal is around 5 Lb?

[mtnkid82]

I think mine was about 11 lbs last i checked w/ a hopper of paint . but now that I have the x valve I think it is a little lighter.

[ß.C.]

with or without paint? Also tank filled or not filled?

[LittMag]

Mine is also a beast, Stock Mag, Warp, steel crossfire68/3k stub, Revy, all this is around 10 pounds, add paint and there you go.

-Litt

[Koosh]

68 Classic, Full 20 oz tank, Half filled VL2000, Warp, 14" SP AA, Palmer Sideline Stabilizer, Gadget grip, and Dye Gripframe = 10 pounds

[Ultimator]

My Impy's actually very light. I'll weigh it later on.

[magsRus]

Angel IR3
Kapp dropzone
Freak Kit
68/45 Crossfire
..pretty damn light

[FalconGuy016]

Originally posted by nicad
, homemade aluminum valve,

How did you make your own valve :confused:

[who_311]

WOOHOO! 7 lbs 12.5 oz with paint, hopper, barrel, and a full tank(that air can add up!;)).

[nicad]

"How did you make your own valve"..

http://www.automags.org/forums/showthread.php?s=&threadid=59051 :)

[PsychoBaller]

a 68/4500 Tank holds 15oz of air. - thats an extra pound.
My geddon thus weighs just about 5lbs.

Thankfully I'm getting a 68/4500 Flatline within the week...only 3ish lbs...... "egggcelllent smithers"

~da baller

[RamboPreacher]

my SC setups are very light, in the couple pound area with 12 grmm and 10-12 balls - complete!

My grinder is going to be, uhm, well very heavy, I have a special tactical vest with a back-back harness for the large co2 tanks and it is designed to run with 3 fully loaded vl3000's. It is man-portable still but heavy.

[funkmunky56]

just weighed it... 6.60 lbs. it's a 68Automag, classic valve, with a blade intelli, lvl 10, CP microdrop and on-off ASA, and a 45-4500 SystemX preset tank with a Redz cover. Also a 12-v xBoard revy. Oh yeah, also an Eclipse body and trim kit, with a splashed old school 14 inch All-American and a SystemX mini-foregrip

http://www.automags.org/forums/showthread.php?s=&postid=667442#post667442

there she is, in all her glory... --Dave

[tobz]

I weighed my 2k3 stock cocker with stock barrel, 12v revvy with batteries, and 68.3k AGD flatline (my whole setup ready to shoot) and it weighed in at 7lbs 5oz. I'll possibly work on the weight later, but I'm not concerned.

T.J.

stock cocker ownage

[lamby]

no option for 10 MILLION? my marker is not light at all... But only feel it it if I am standing and not playing.

I guess I need to play more :)

[Sparq]

RT Pro with 68/3k steel and 12v revy weights about 9 pounds with paint....of course I'm not using proper scales, but meh. Anyway, yeah - I only feel the weight when I just walking around with it. Once the paint starts flying that all goes away.

[vdo_game_junkie]

I can't believe how heavy these suckers get. I'm so used to playing with my Phantom Stock calls marker that when I got my minimag I was like, dang need to work out or something.:eek:

[Sparq]

Heh....my Trracer Pump setup, fully loaded with paint and CO2 is only slightly heavier than the tank alone from my RTP.

[kreno]

Bushmaster 2K
68/3K Fiber Wrapped
J&J Edge Barrel
HaloB

Weighs about 6.5lb with paint... ;)

[Fatjon]

2k3 BKO
macdev reg
revy
68/3000 tank
im guessing 5.5lbs

[alf]

im at 12.5 lbs....with paint and air

the guys at the fill station say "NOT AGAIN!!!"

emag w/ sight rail
warp
halo b
boomy or freak w/ 14" tip
88/45 max flow

-alf

[mykroft]

Y'all got nothing on Drizit's Tippy.

That thing's got to be 25 pounds.

[ChucktheMAGician]

9.6 lbs on an emag w/ freak, warp, revy, Shocktech drop, and 88/4.5k Centerflag adj. No paint or 9v's. 6.4 lbs on a Retro'd no rise, freak, intelli, revy, and 68/4.5k flatline.

[JT2002]

i dont have something too exact, but im at about 7-9lbs with Classic timmy, Warp, 12v revvy, 68 4500 pmi

[Wc Keep]

nothing to precise but my setup is weighing in at about 8 lbs.

on it:
classic body
classic valve freak alumium back with 14" aa tip
benchy double trigger frame
warp with a battery
revvy with two batteries
nitro duck 68 3000 tank
shocktech drop
and a generic foregrip.