PDA

View Full Version : LVX Performance Issue


Super Junk Pile
03-09-2003, 11:19 AM
I have installed the LVX upgrade on a 68 auto mag without power feed and the stock regulator and it is not leaking. However, it seems like the first shot rolls out the barrel and the second shot has full volicity. Then the third rolls out the barrel and the forth has full volicity and so on. Any explainations?:confused:
Jaymz
03-09-2003, 11:26 AM
make sure your reg seat is in the right way...oil...sure you installed it right?
Super Junk Pile
03-09-2003, 11:30 AM
I believe that it is installed correctly. I followed the video exactly. I have also oiled the carrier and the regulator. I have read othe posts that talk about increasing the reg pressure to 850 psi. I'm not quite sure how to verify that.
speedyejl
03-09-2003, 02:03 PM
Work it in and shoot it for a while to loosen everything up. It sounds like the problem is more in the valve or reg. Clean both those out again, and try your old bolt to see if thats the problem.

Also its LX, just how its normally worded. LVX looks like your trying to say level 5 with excess numerals.