PDA

View Full Version : On/off -pin just pessureized


GhillieGuy
03-15-2003, 02:20 PM
I was having these problems when i installed my level 10 the other day, but i just installed back my level 7 set up and it does the same thing: the on/off pin is just pressureized and when you push it it doesn't realese air to fire a shot. I turned up the velosity all the way and it didn't help. Before i installed my level 10 it worked fine.

Please help:confused: :confused:
GhillieGuy
03-15-2003, 02:43 PM
Now it works fine with the level 7 set up, but not the level 10. When i pull the trigger it is pressureized and does nothing.
cgrieves
03-16-2003, 03:22 PM
Try larger carriers until it fires. Then keep trying larger carriers until it leaks. Then go down one size: you've found the optimum. Also keep the carrier o-ring lubed.
athomas
03-17-2003, 10:22 AM
What kind of trigger frame are you using? Check you trigger rod tolerances.
GhillieGuy
03-17-2003, 07:50 PM
I have a hyperframe so i have no rod...(that didn's sound right)
athomas
03-17-2003, 08:10 PM
Now we are getting somewhere. I have heard similar reports like this with hyperframes.
hitech
03-17-2003, 09:03 PM
Originally posted by cgrieves
Try larger carriers until it fires. Then keep trying larger carriers until it leaks. Then go down one size: you've found the optimum. Also keep the carrier o-ring lubed.

Did you try this? As long as you are trying to manually fire the marker by pushing on the sear it you are eliminating the Hyperframe as a problem.
askman
03-18-2003, 02:03 PM
One thing I heard about hyper frame, is that 9v does not provide enough power margin. LX runs at higher pressure, and sometimes the solenoid is not powerful enough to trip it. You may contact centerflag about it.
GhillieGuy
03-18-2003, 09:42 PM
If i put in larger carriers it leaks like crazy. And it's not the hyperframe becouse i push in the sear manually on the back of the frame and it still doesnt shoot, its just pressureized.
GhillieGuy
03-21-2003, 11:28 PM
It's not the tank becouse i got a hold of another tank and it still didn't work, and the tank says 3000 psi on it. Any suggestions??????:confused: I'm going p-balling this weekend and i need it to work.
athomas
03-23-2003, 08:39 AM
Try it with the shortest spring on the bolt. Make sure your velocity is turned up.