PDA

View Full Version : Powerfeed attached wrong?


stephanschoeffel
03-18-2003, 10:07 AM
Hi Folks,

my powerfeed seems to be attached wrongly. Balls stuck right at the point where the balls enter the body. I took a closer look and as well looked at a friend's 'Mag. My Mag's powerfeet is attached about 1 millimeter too much to the back of the gun and the balls don't enter the body properly.
Has any of you experienced this before and do you know if I get a replacement for the body. Otherwise I had to buy a new body.

Thanx in advance
Stephan
askman
03-18-2003, 12:01 PM
are you saying that barrel does not line up with the body, so paint is getting stuck there? 1mm adjustment can be probably made by loosening the front screw and adjusting it.
stephanschoeffel
03-19-2003, 06:15 AM
no. im saying the powerfeed does not line with the body
cgrieves
03-19-2003, 06:47 AM
I've seen this with aftermarket bodies, but never with an AGD original. Their quality control is very tight.

Are you using fresh paint?
stephanschoeffel
03-19-2003, 08:27 AM
yeah i used brand new paint and not even the biggest... i used scherer powerballs; medium sized