Update on SLUGS

[AGD]

AO,

Yes all the current SLUGS are Over The Valve (OTV). We made more than 20 of them so don't worry we will have more next week. We just banged a few out for the store to keep you happy.

There is a print posted around here somewhere. Ask questions about SLUGS here and I will answer. I don't have any more info on the ULE's until I get to work tommorow. I will post ULE pics when they get back from ano.

AGD

[Temo Vryce]

Thanks for the update Tom

[DiRTyBuNNy]

woot woot..ULE pix when they get back from ano..sweet!

[omni]

"woot woot..ULE pix when they get back from ano..sweet!" X 2

[FESTUS33]

Tom
Can you post a CAD drawing that will work with AutoCad LT97
PPPUUUULLLLEEEZZZE!
Rick:eek:

[rpm07]

Tom my question is are you going to sell a slug warp feed raw not milled and if so any idea when and I will not hold you to the time frame and will they be made in right and left side.

[PzYcO]

yea, i want a warped slug :)

[AGD]

Warp slugs require you to notch out the rail to clear the feed tube if we to it straight out the side. We will probably do a batch in the next run.

AGD

[Evil Bob]

Thanks Tom! I want a left warp body.

-Evil Bob

[rpm07]

1 more question are there going to be any warp feed ule bodies this weke

[Jack & Coke]

Is there a link to the AutoCAD file for the new OTV Sluggo available?

[rpm07]

here you go
http://www.automags.org/forums/showthread.php?s=&threadid=73563

[Jack & Coke]

Ah ha!

Thanks!

I guess I was looking around in the wrong forum.

I need to check out the Automags - Tech Forum more often... :)

[FESTUS33]

I appreciate all the helpful folk's out there, but I still have'nt found a drawing that will open in my computer.
I am operating with AutoCad LT97, Kodak Imaging, ArcSoft PhotoStudio 2000, and not much more that is usefull in opening these file's. Any help that Anyone can give me, would be greatly appreciated.
Thank's
Rick:eek:

[J-LYTE]

Festus, see if this one works

[FESTUS33]

Thanks J-Lyte
I was finally able to get that one downloaded.
Rick:eek:

[Evil Bob]

Unfortunately, I don't have a cad program with which to open up the attached file, so I'm guessing that the warp slug is following the current existing trends for warp bodies.

My comment here is that I would like to see the warp feed port come off at a 90 degree angle and not angled downward as the current modules do.

The problem with the current angles is that folks are having to cut or melt their hoppers to deal with getting the hose in the right position to feed properly. If the feed was setup so that it fed from the bottom, it would allow people to setup their warps alot tighter without having to modify their loaders.

The attached drawing is overly simplified but illustrates what I'm getting at.

-Evil Bob

[FESTUS33]

nicad
I appreciate your trying to send that download to me, your E-Mail got through but the attachment did'nt come with it. But I was able too download it off of J-Lyte's link. But Thank's for the Help anyway! your a true Gentleman and a Paintballer.
Rick:eek: