hyperframe question

[mag-hatter]

is it possible to sweetspot a hyperframe for the classic mag?

[Mossman]

It's possible to sweetspot a hyperframe for cockers :D

In all honesty I wouldn't know, so consider this a bump, but i'm pretty sure the recoil would be enough to get some bounce going.

[thecavemankevin]

nope, unless you do some custome work to it like a new micro switch and then it "might" be possible.

[the123]

I've heard of people putting in Black Dragun trigger switches, but mine wont do it. Would be a bit hard as well with the ROF software only going to 13.

[mag-hatter]

how hard is it to adjust the trigger pull on it? is there a little screw that adjusts how small of a pull you can make it?

[Paintchucker]

Maybe I just bought a used one that was broke in, but the trigger pull on my hyperframe is tiny and light. Almost too light and small, as I have had to wash my barrel condom a couple times from accidentally tapping it...

[mag-hatter]

is it really easy to walk the trigger on these? i heard that it isnt, that you have to sort of pull on it hard.

[Tim Taylor]

Hyperframe has a mouse click trigger pull. Walking the trigger is EASY. Are you sure you're not thinking of the Intelliframe?

[Dubstar112]

Hyperframe is nice. Not adjustable. Its very short, and very light. I sold mine to nicad.

[hitech]

Here is a link to a Hyperframe Trigger Job:

Hyperframe Trigger Job - By Rudy (http://www.automags.org/forums/showthread.php?s=&threadid=37414&highlight=hyperframe+trigger+job)

[mag-hatter]

so basicly that mod makes it so you have an ultra small pull? why dont you just put a screw in your trigger?

[hitech]

Originally posted by mag-hatter
so basicly that mod makes it so you have an ultra small pull? why dont you just put a screw in your trigger?

The stock switch needs most of the current trigger pull to work. Also, the mod was intended to lighten the pull.

[mag-hatter]

lol so a mouse click isnt light enough?!?! that voids the warrenty though! damn!

does anyone have an artical on how to intelli link the frame to your hopper?!

[Dubstar112]

Intellifeeding... I dont think its worth it to do this to your hopper. You should plan on having a fast enough hopper if you plan on having a Hyperframe...However, if you tap into the solenoid connections you can get a signal that will work for the warpfeed.

[mag-hatter]

is an xboard revvi fast enough? i heard hyperframes are capped at 13

[Dubstar112]

should be enough. I never ran mine at 13 with a hopper on top.. I usually set it at 12 or 11. I believe the x board could handle 13, but you may get some occasional chops or pinches with lx

[hitech]

I have the new board that will go to 20bps. I also have a warp. I currently have it capped at 16. :D

[mag-hatter]

lol 20 bps?! you'd better get a halo b then! damn!