Anodize or powder coat RT Pro body rail

[BunkerRat]

Which is tuffer anodizing or powder coating.Also I plan on filling the holes taped for the front grip and sight rail on my body rail to give a more stream line look.I was told JB weld would take the heat and hold powder coat but I wasnt sure about anodizing.

[cheetah256]

well, most likely the JB weld wouldn't change color in the ano bath, so you'd be stuck with 6 little circles on each side : )

[paintballbeaver]

also ano and powder will hold up about the same exept to scrathing powder will hold up much better to scratching

no jb weld will not hold during powder coating

and there would be no chance in anoe that that would work you would have to have them tig weld them closed then remachined or sand it flat

i do powder coating i can coat your rail at 10.00 i can also fill the holes in the side for 10.00 i would use a product called lab metal you can pic it up at auto motive stores or eastwood.com

[BunkerRat]

Hey beaver would I need to strip it down as far as the old coating on the rail if so what would i use to take it off..Please dont say sandpaper hehe.