Automag Not Shooting

[devingoode]

hey, i got a lvl 10 mag, i gassed it up today and the trigger was pressurized, but when i pulled the trigger, nothing would happen, the trigger would pull back but nothing in the gun would respond, i oil my gun regularly.

[MinimagRockin']

check out the level x post in the classics in this forum

[ChucktheMAGician]

I'm assuming you had it working properly before w/ level x and now it's not? Mine was acting up yesterday do to the humidity, at least that's what I'm blaming! I'm always quick to change carriers when there's a problem and it seems to work. Finding the right carrier is what I find to be the hardest part. You need one w/ a little friction, to much and you will get bolt stick(which is what it sounds like you have), not enough and it will leak. Here are 2 links w/ some great info, the last one is a little long but has a ton of good info http://www.automags.org/forums/showthread.php?s=&threadid=40904
http://www.automags.org/forums/showthread.php?s=&threadid=43538

[CRiZO]

i'm not an expert, but mine did the same when i had my mag and installed the lvl 10.

Try the next smaller spring and see what happens, that fixed it for me...

[TheBigRaguPB4L]

before you go about doing all of that, turn up the velocity till it shoots. That will get it working. If it's shooting to high afterwords. Take out the valve and switch to a shorter spring. Then lower the velocity accordingly. You should be good after that