RT Pro tips

[sturmvogel]

I just ordered an Rt Pro, so can someone please give me some tips about for when i get it.

[xen_100]

number one tip......fully pull the trigger and let go. it is ALOT harder to short stroke an RT valve, but it can be done.

[Dayspring]

Make sure you only run HPA/Nitro through it.

Put a few drops of oil in the air line and gas her up. Fire several shots to work the oil through.

Remember- the velocity adjuster is on the back and if it shoots air out the back, your velocity is too high. (Pull the trigger to stop the flow of air & turn it counter-clockwise with a 1/8 allen key.)

remember- when AGD says "reactive trigger" it means that it kicks the trigger back to firing position REALLY fast. It's not the Tippmann RT that's damned near full auto.

[sturmvogel]

Will a Ricochet AK hopper work ok with the RT, i got the pwerfeed one.

[xen_100]

any hopper will work. some will work better than others, but any will work. if your RT pro has the x-valve, it will have the Lx bolt in it, so even a VL200 would work. no chops.

[p8ntballsnowman]

Originally posted by Dayspring
Put a few drops of oil in the air line and gas her up. Fire several shots to work the oil through.


Be sure to take off the barrel, to get the oil through. If not, it makes the barrel really oily, and very inacurate.

[sturmvogel]

Does the RT Pro come with an intelliframe? And is the stock barrel good, how long is it?