PDA

View Full Version : Projekt: Ghetto ULE



WickeDKlowN
05-23-2003, 06:44 PM
This is my latest project(alongside my MicroMag, and the MiniCocker that should be here soon). In this project, I am going to build a ghetto'd out poor-man's ULE.. so far i have cut down a SF body(gonna cut more off later) and cut down the body rail, along with drilling some holes.

I plan on cleaning up the body rail and polishing it up good. Possibly doing some more body work. Then get a nice powder coat job on the body(prolly purple) & spray paint the gripframe Gold. Slay a Crown Royal tank cover on it, and its gonna be Big Pimpin' baby! lol

WickeDKlowN
05-23-2003, 06:55 PM
Right side

mrkbik
05-23-2003, 08:43 PM
Maybe you should call it a UNSLE for "Ultra Not So Light Engineering". Hehe, jk, I'd love to see some pics when you're done.

WickeDKlowN
05-23-2003, 08:55 PM
Originally posted by mrkbik
Maybe you should call it a UNSLE for "Ultra Not So Light Engineering". Hehe, jk, I'd love to see some pics when you're done.
Hmm.... I like it! Good thinking, hehe

nato
05-23-2003, 09:38 PM
I like this idea... I feel that it is my duty to steal it and then inprove upon it! I think it would be funny to get a competition going on who can make the most Geto mag! Notice how I spell geto wrong? That obviously means that I can make more of a geto mag that you can because I cant even spell it right! But seriously... I am impressed and I really wouldn't mind starting a project like this. I would go for a rust, oil finish to make it just right... A little bit of hobo here, a bit of cottage cheese stain there.

N.A.T.O.:)

WickeDKlowN
05-23-2003, 09:41 PM
lmao, Sounds great, Go for it!

WickeDKlowN
05-25-2003, 03:49 PM
Did some work to the Trig frame. It's still strong as hell too. I cranked the vice till it was hard as hell to turn, and it was fine.

WickeDKlowN
05-25-2003, 03:53 PM
Pic of the whole thing so far

WickeDKlowN
05-25-2003, 04:00 PM
Both of my 'Mags ifront of my computer(1.2GHz T-Bird, 512MB RAM, 60GB 7200RPM Maxtor, GeForce 4, Thermaltake Xaser II Case, Vantec 420w PSU, 3 Vantec Stealth's(intake), 2 Vantec ThermoFlow's(exhaust))

TKOMag123
05-26-2003, 07:36 PM
lookin sexy. would love to see the end product!

mh53eplt
05-27-2003, 12:03 AM
same here! this is my project LX minimag pump. still need to cut the HL down about an inch, then get it anodized.

WickeDKlowN
05-27-2003, 03:10 PM
I hope you arn't thinking of annoing the body. It will dissolve away when you put it in the acid. You have to Powder Coat 'Mags.

MrRottenTreats
05-27-2003, 10:18 PM
Originally posted by WickeDKlowN
Pic of the whole thing so far

I spy Morton's List back there.:p :D

mh53eplt
05-28-2003, 01:53 AM
meant to say powder coating, to used to my cockers.

WickeDKlowN
05-28-2003, 03:15 PM
Originally posted by MrRottenTreats


I spy Morton's List back there.:p :D
You're damn straight you see Morton's List! Too bad I havn't got a group together to play it yet.

WARPED1
05-29-2003, 06:31 PM
Why LX on a pump?

DCWnek14
05-29-2003, 11:45 PM
post some pics up when your done with the project. I really want to see the end results.

mh53eplt
05-30-2003, 12:08 PM
Take out the pump spring and bumper, replace the LX bumper in the mm valve and stand by. Your opponents will never know what hit them.

circus5
06-06-2003, 02:13 AM
the original ghetto mag owns all, i dunno who did it. i had this set as my wallpaper for awhile :)

WARPED1
06-06-2003, 09:04 AM
I used one of those oil cans(the plastic ones) back in the day. The old pump gun days. My PMI 1 loved it!

shinobidice
06-10-2003, 07:44 PM
notice the sprinkler line barrel.
Bow before shadow221 of pbr's goodness!
lol actually i like the microsized rail it adds to the smallness plus cuts weight

xatle
06-14-2003, 08:11 PM
your not worried about the lack of rail support for the valve?

WickeDKlowN
06-14-2003, 10:30 PM
Originally posted by xatle
your not worried about the lack of rail support for the valve?
no





If I decide to continue this project(rail and trigger frame are being used for a spyder right now, but thats a secret, so you never read that ;)) I'll just use some blue loctite on the reg so it dosn't unscrew itself.

CRySyS
06-14-2003, 11:16 PM
Do like me. Get an Air America Raptor reg body and use it on your mag. I cut the back of the rail at an angle and rounded it to match the Raptor reg. Those tanks hold 3k+ without working loose so I don't think the mag will have trouble. ;) Still need to order a reg body though. Stealing one from work just isn't an option. :(

shinobidice
06-24-2003, 11:30 AM
the AGD A.I.R. valve won't unscrew when aired up. Shadow221 on pbreview.com said so, and i believe him. I think he did something to his rail like that but i'm not sure so dont hold me accountable.

xatle
06-25-2003, 02:16 PM
im more concerned about the field strip screw breaking.
the only things holding the valve in place are a loosely fitting body, a tightly fitting rail, and the field strip screw. normally the field strip screw only needs to cope with sheering forces, but if you remove a large portion of the rail support it might turn into a bending-sheering-ripping action thats alot more likely to break the screw.

Brak
07-09-2003, 09:36 AM
dude your 7-ups are all upside down

WickeDKlowN
07-09-2003, 07:26 PM
Originally posted by Brak
dude your 7-ups are all upside down
That's because it isn't 7-Up, it's dnL :rolleyes: :eek: :D

jman44
07-20-2003, 03:20 PM
that upside down stuff is downright nasty. whats with all the big soft drink companies coming otu w/ all this new crap it all tastes bad imo. as if thye needed more business?

f3rr3+
07-20-2003, 10:57 PM
turn the standard feed body into a cf.... now that would be gh3tt0... |\|(_)|=|= $@||)

f3rr3+
07-20-2003, 10:58 PM
btw i just felt like be 1337 there :P

f3rr3+
07-20-2003, 10:59 PM
i dont edit i just post whore :P

02vertcocker
07-23-2003, 02:57 PM
Dont forget to do "custom engraving" on it when your done.

WickeDKlowN
07-26-2003, 10:33 AM
Originally posted by jman44
that upside down stuff is downright nasty. whats with all the big soft drink companies coming otu w/ all this new crap it all tastes bad imo. as if thye needed more business?
The only "new" ones i like are dnL and Code Red Mt. Dew. Coke needs to stop making all that Sprite Remix and Vanilla Coke **** and bring Surge back. Surge was awsome.

jman44
07-29-2003, 11:44 AM
yeah man definately custom engraving when ur done, then go over the engraving w/ one of those gold stick things that will make the engraving look all gold lol. now that would definately rule over all ghetto mags