Automag Classic Questions

[gogbay]

I haven't played in a few years. Getting back into it. Pulled the Auto out of storage and it is good to go. But I need a new barrel. I am a little confused as to how to locate other manufacturer's barrels, or what Automag barrels are compatable to the classic. Also, the screw holding the main body scew has fused to the grip, any ideas on how to get around that so I can upgrade the main body or grips?

[xen_100]

goto www.paintballgear.com and look under "barrels" any barrel that is listed for and automag will work

as for the screw, use a dremel or a file to get the head off of it. or you can try some WD-40 to lossen it up.

[Mer]

The J&J Edge kit is one of the best deals going right now for a barrel:

http://www.paintball-discounters.com/cgi-bin/webc.cgi/st_prod.html?p_prodid=1117&p_catid=70&sid=5bW2dL0lqA0s6RJ-26103154393.c8

$114.00

Which screw are you talking about the one in the front that is inside the trigger guard or the one in the back with the knurled head? They both accept an 1/8" allen wrench.

Eric

[gogbay]

its the trigger guard screw and I broke three allen wrenches on it and WD40, so I will try the file I guess. thanks for the ideas