PDA

View Full Version : mini cocker?


1old68classic
06-20-2003, 12:30 PM
new to cockers and i was wondering what makes a mini cocker different froma normal one?
irbodden
06-20-2003, 12:37 PM
The body is slightly shorter if I recall correctly
Sparq
06-20-2003, 12:39 PM
Yes. I owned one earlier this year. Instead of the reg screing into an ASA behind the front block, it screws into an ASA which in turn screws into the front block itself. the body is about 1/2" shorter that way.
1old68classic
06-20-2003, 01:27 PM
could i put a normal cocker front block on it to change it back to a regular one or no.
Dayspring
06-20-2003, 02:30 PM
I don't believe so. They are shorter, meannig they have a smaller air chamger inside.
Sparq
06-20-2003, 02:50 PM
That's right, it cannot be changed. The body itself is cut off.

http://www.unkind.org/pics/Accessories/AUTOCOCKER.gif
This is an autococker. Notice how the reg screws in between trigger frame and front block.

http://www3.sympatico.ca/reids/Cocker.jpg
This is my old Minicocker. Notice how the reg screws directly into an adapter on the front block, and there is no space between front block and trigger frame. (ignore poor image quality and general ugliness)
1old68classic
06-20-2003, 03:18 PM
ok thanks for the help on the