PDA

View Full Version : help w/ my retro



Adrenaline666
09-03-2001, 03:33 PM
i put my retro valve and sear in my mag and its just leaking down the barrel..ive tried different spacers. but cant figure out the problem..please help me

REESE
09-03-2001, 03:57 PM
what kind of tank do you have??? you need to get a burst of air to shock the "system" to get everything all sealed up...if you open up the halves of the valve...you will see a brass cone looking thing and possibly an o-ring stuck inside of it...that o-ring fits right into the grey half in that center groove...put it together and gas up again...usually if you have an on/off on your tank and you open it real quick a few times, it settles everything...but don't forget to run a few drops of oil through the system...hope that helps...

Mink06
09-03-2001, 05:36 PM
does it leak the whole time, or just when you gas it up, how bad?

Adrenaline666
09-03-2001, 05:46 PM
THANKS FOR THE HELP REESE..it was a combination of two things one was the o-ring and the other was the sear...thanks for your help