lookin for a new drop..

[rkjunior303]

I'm lookin for a new drop, I'm not feeling the Kapp DZ3 that I have.. Anyone have any luck with these? Basically I'm looking for it to come a little behind the Foregrip around the trigger...(Reg/on/off around the trigger area. I'm running a 68/3000 so the bottle isn't that big.. Any other suggestions?


http://store6.yimg.com/I/actionvillage_1744_350529428


This is what my gun has on it now..

http://www.automags.org/forums/attachment.php?s=&postid=855252

[punkcmonkiez]

a shochtech medium drop and asa. i think thier really nice...i love mine

[BajaBoy]

Originally posted by punkcmonkiez
a shochtech medium drop and asa. i think thier really nice...i love mine

i 2nd that one

[Kevmaster]

Originally posted by BajaBoy


i 2nd that one


make tat a third

[rkjunior303]

nice, i'll have to check em out.. This Dead-On seems like it's going to be too big..

[cardz]

I thought I'll save a thread since I have the same question:p

I am thinking about the System-x xtreme cradle/drop for my X-mag. I think the X from system-x goes nicely with my Xmag. Anyone have any experience with the cradle/drop and on/off.

[punkcmonkiez]

http://www.buyshocktech.com/pages/shocktech/airfit/drop_long.html
;) ;) :D

[XVFrontplayer]

I fourth the motion on the shocktech.
except i would get a kapp on/off with a shocktech medium or long. But the shocktech on/off is good too.

[rkjunior303]

cards, thats cool.. dont worry about it.. i actually like that one, too :)

[Z-man]

Fith vote on the Shocktech. Check out my RT with it here:

http://www.automags.org/forums/showthread.php?s=&postid=897461#post897461

[Gadget]

Originally posted by cardz
I thought I'll save a thread since I have the same question:p

I am thinking about the System-x xtreme cradle/drop for my X-mag. I think the X from system-x goes nicely with my Xmag. Anyone have any experience with the cradle/drop and on/off.

I run a System-X on my mag and it works fine. The on/off is easy to turn and doesn't foul the battery too much when you need to remove it. My only gripe is that it doesn't feel particuarly sturdy - but it's fairly cheap to buy and it works. :)

http://www.chimpy.com/pics/emag.jpg

[cardz]

Gadget, is your drop the regular one or the xtreme aka. x-10 verions? I want my drop as far forward as possible but don't want to hit the battery on my mag. Also, I read somewhere that there is problem with the tank not able to screw in all the way thus causing a leak. The solution to that was to fill down the pin. You experienced this problem??? Thanks again for the PIC.

[EsPo]

"dead on" also makes a short version of that drop which can be found at www.countypaintball.com

i'm looking into buying it... only downside is that you cant unscrew your tank.. not that it matters because it has on/off

[rudy6732]

i have the system x one i like it a lot. i think it looks better than the one in ur first post, the red one.

[madmatt151]

I have the dead on, actually the new one with the bleed valve. Th e bleed valve works great and the tank is very nicely balanced if you want it forward. Certain tanks may or may not fit depending on the reg and the guage.

[Fatjon]

ill 6th the shocktech medium.

[heftylefty]

done even use a drop, i vote for the Check-it unimount.

[FalconGuy016]

My friend has that exact dead on drop... color and everything :)

Its perfect for him, but he has a 88ci PE tank, and its a really compact setup

[Steelrat]

Thats the old system-X. I had one, and it leaked like crazy. I went back to the store and they gave me a new one. Didnt leak one bit, works great.

The newere model has a larger knob at the front.

[Gadget]

Originally posted by cardz
Gadget, is your drop the regular one or the xtreme aka. x-10 verions? I want my drop as far forward as possible but don't want to hit the battery on my mag. Also, I read somewhere that there is problem with the tank not able to screw in all the way thus causing a leak. The solution to that was to fill down the pin. You experienced this problem??? Thanks again for the PIC.

It's the regular one. Had no problem with the pin - I run a PMI Pure energy 4500 reg and it screws all the way in without fouling on anything.

[wobbles82]

I use a Dead On Bullet drop on my RTPX and it works great. With a mag it puts the tank right at your shoulder, keeps ya tight, and looks pretty "snazzy". The on/off is a plus, getting the hang of letting it bleed then shutting it off took a bit, otherwise youll have too much pressure on the pin and WHABAM theres goes your cap flying across the parking lot. ( I speak from experience. heh. :D )