TK gives the lowdown on 3.0 software, warp ules, and much more!

[Skoad]

Emag Software Version 3.0:
Tom_Kaye> software 3.0 update
Spydarm> 3.0 update?
Spydarm> whats in it?
Potatoboy> will it be available at the IAO?
Tom_Kaye> will have shot buffering and cruise at 18 bps while walking
Spydarm> nice
Tom_Kaye> dont think it will be done by IAO but we are tryign

Chord Bodies:
Nicad> hey tom.. will yall have the Chord bodies ready by IOA? might be kinda pushing it eh.. :-/
Tom_Kaye> hi nicad
Tom_Kaye> we are tryign to get them quick anoed

X-mag batch:
TNS2k2> Tom_Kaye not to bother, but where is the next batch of Xmag's along the line of production?
Tom_Kaye> xmags going to polish and ano this week
Tom_Kaye> this next batch should have all the fixes and production should be better now
TNS2k2> Tom_Kaye does it have the new warp module?
Tom_Kaye> I think we are selling warp modules with all the fades
Rob_AGD> Hey TK ho wmany X's in this batch ?
Tom_Kaye> 25 x's

Y-Frames:
Tom_Kaye> yframes are in the shop!!
Tom_Kaye> we are doing packaging this week

Warp ULE bodies:
TNS2k2> Tom_Kaye warp ULES are in soon too, eh?
Tom_Kaye> warp ules are at ano

Megameet at AGD:
Tom_Kaye> wewill be doing the megameet here this year
Tom_Kaye> tech class,tour and paintball


Tom_Kaye> ok got to go, cya all!


yeehaw!

[AutomagRT1483]

Megameet at AGD!!! OMG!!! Looks like I'll be going to that for sure. Besides I wanna see the factory!:D

[Grasshopper]

Wow... Lots of info.

[AutomagRT1483]

I know, I just printed this thread out just to keep by my computer so I'll always see it.

[Grasshopper]

I can't wait to see how the finished Y-Frames look on gun.
/me salivates

[Gadget]

Oooh too....much....information :)

Megameet sounds good

/me starts checking cost of flights from London to Chicago :)

[Animal Mother]

Shot buffering? 18bps?

ooooooooooooh!!!!!

PLEASE let me be able to send in my E-mag and have it updated.. PLEASE!!! :D

[SIGSays]

i see i see

where are all the pictures?? lol.. should of made him post in the forums..

[GT]

Originally posted by Skoad
[B]
Tom_Kaye> will have shot buffering and cruise at 18 bps while walking

Tom_Kaye> 25 x's

Tom_Kaye> yframes are in the shop!!
Tom_Kaye> we are doing packaging this week

Tom_Kaye> wewill be doing the megameet here this year
Tom_Kaye> tech class,tour and paintball


life just doesnt get any better!


:eek: :cool:

[Kevmaster]

but you didn't ask about ULE Triggers?? Lunacy!!

[Skoad]

Originally posted by Kevmaster
but you didn't ask about ULE Triggers?? Lunacy!!


DOH!

[rdb123]

What are "buffering" and "cruise"?

[rehme]

Originally posted by rdb123
What are "buffering" and "cruise"?


ditto

what is buffering :confused:

[JT2002]

what do the warp ule's look like?

[Catch22]

This is what they look like. I got one because I broke into the Anno shop!:) :) :) http://www.hunt101.com/img/051327.JPG

[FalconGuy016]

lol catch :)

However, all I wanted to know about was the ULE trigger!!! AHHH!!! lol

[Dayspring]

Ok. As of right now, when you pull the trigger the gun cycles. If you pull the trigger again before the cycle is over, you lose that shot.

What the 3.0 will do is this:

You pull the trigger and the gun cycles( A ). If you happen to pull the trigger again during a small window (say 10ms), it will remember that trigger pull and cycle again( B ) once the original firing( A ) is complete.


Originally posted by rehme



ditto

what is buffering :confused:

[TNS2k2]

YAY sounds like an AGD version of WAS cheater board. :rolleyes: yes, i did ask a few questions as i was eager to know, and even my canadian'ness got into a question. EH?!? haha

TNS2k2

[Smokee_2_7]

When exactly is the IAO? Will the current (4th) x-mag batch be finished and shipped before this? I guess what i'm getting at is wether or not batch 4 will have 3.0 installed on it from the factory, or if we'll have to send it back in for the upadte. I HOPE it's finished before these guns ship- - - mine is in this batch!!


Carl

[rpm07]

IAO is this week comming up

[Ghost24]

There is a "new" warp module for the X-Mags? If so, how is it different from the original warp module?

[rdb123]

Originally posted by Dayspring
Ok. As of right now, when you pull the trigger the gun cycles. If you pull the trigger again before the cycle is over, you lose that shot.

What the 3.0 will do is this:

You pull the trigger and the gun cycles( A ). If you happen to pull the trigger again during a small window (say 10ms), it will remember that trigger pull and cycle again( B ) once the original firing( A ) is complete.



Thanks for the explanation. What is "cruising" though?

Also, I wish this will be available for the SFLs out there! ;)

[misfit]

the new warp breech should come out of the gun at a 90 deg angle instead of a slanted one so you have to use the 90 deg warp adaptor, i like the old way better, but i think they were having issues when using the old one with the warp adaptor

[Muzikman]

Problem with the current warp breech is that the slight angle it is at is more of an problem than it is worth. It's too much of an angle to use the 90 adapter on it and it's not enough to run right to the warp. What they need to do is make a PF breech for the X and run the warp the way the current emag warp bodies run.

[Ghost24]

Thanks for the information. I don't use the 90 degree adapter or for that matter, have any problem with the current warp module (using with a revy with a hole cut out for the warp hose). I guess, I will use the cash on a milled battery pack instead of a new warp module. If only the milled pack came already annoed in glossy black.

[Animal Mother]

Any update on the 3.0 software? :)

[Dayspring]

Not ready yet.

[Animal Mother]

Blarrrgggggg!!!!!

[Benfica4ever]

I wish i would be able to go to the mega meet and see the factory but dont think y dad feels like driving that far. or setting me on a plane to see paintball stuff. he has enough trouble looking at my paintball gun.
he thinks its ugly. what do you think?

y-grip is going to be ordered in a few days:)

[Benfica4ever]

ahh not a good pic.
heres another