Does front frame screw come with washer?

[hitech]

Does the Front Frame Screw (http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=214&CATID=6) come with the washer. I need both, and would hate to have to order just the washer. If it does NOT, does anyone know where to find the washer in the online store?

Thanks.

[RRfireblade]

Since no one else will answer I will state that I don't know.I guess call AGD.FYI,I don't think I ever had a washer on that screw and I know none of my mags do now.Maybe I should get one too?:)

Jay.

(free up)

[pbguy888]

When I ordered my X valve , I ordered a couple front frames screws too ( I have striping problem) And mine didnt come with em , but I don tthink it matters to much...

[Halliday]

I have used a thin regular non-AGD washer before, and didn't have any problems.

[Tunaman]

It does not come with a washer as it isnt needed. If you really need some washers, jst take apart an old Mag spring pack and you will have enough washers for a lifetime...and then some.;)

[hitech]

Originally posted by Tunaman
It does not come with a washer as it isnt needed.

Okay, I'll give it a try without one. The last time I tried it caused the barrel to bind. It might have been the longer screw for the hyperframe, but I don't remember.

[Halliday]

They are diff sizes. I've seen a guy try to use his Hyperframe grip screw for an Intelli. It didn't work. :rolleyes:

[Tunaman]

Just look in the body with the screw in. If you can see the screw threads something is wrong and a washer may be needed.

[BlackVCG]

Or you can just grind the tip of the screw down a bit. :)

[Schnitzel]

i've used the screw without the washer, and it scratched my barrel a lot, so use one if you have one. if i were you, i would grind it down per black's suggestion.