Dallara final body from Deadlywind [Archive]

BajaBoy

08-13-2003, 09:54 PM

omg if you make that off an emag rail, and have the body/bettery run smoothly then you will have an order from me.

that is really nice! i hope you guys make this one!

PaintballSmurf13

08-13-2003, 09:59 PM

ok..i love that body and rail combo...i would so buy that..
still reminds me of the orracle cocker body..looks better though.

-Ryan F.

FooTemps

08-13-2003, 10:01 PM

... must... resist... AHHHHHHHHH!!!:( I can't afford...

darklord

08-13-2003, 10:01 PM

reminds me of a hybrid of the x-mag body and the orracle for some reason. Nice work!

lack of grace

08-13-2003, 10:02 PM

i think it looks like and orracle vs. xmag ;)

edit: oh dood above just said that.....blarg!

DWill

08-13-2003, 10:05 PM

It looks nice, thats all I care about :) . After seeing one cut out I might have to sell my ULE...

ZAust

08-13-2003, 10:19 PM

wow, any idea on how much this baby is going to cost? that is the schweetness.

rpm07

08-13-2003, 10:23 PM

I like the body with the rail looks clean.
Oh by the way the nicest looking body someone came up with yet.

Halliday

08-13-2003, 10:26 PM

Originally posted by nicad
in poo yellow:

If I ever pooped yellow, I would seriously be heading for a doctor.

Nice body!

Mossman

08-13-2003, 10:40 PM

GORGEOUS!

MayAMonkeyBeYourPinata

08-13-2003, 10:44 PM

kidna reminds me of the x-mag body

Blazingace

08-13-2003, 11:37 PM

So.......

First, can you do that to an E-mag rail?

Second, can you mill out the inside of the E-mag rail?

Third, how much would it cost to get one in gloss black?

That is the sweetest thing I have seen in a while for the mag.

Big'n slo

08-13-2003, 11:43 PM

Where do I sign? :D ;) :cool:

rikkter

08-13-2003, 11:45 PM

wow. i love that 10x more than the other one. just the top portion going back more adds that much to it. i'min love.
i'm not saving up for xmag anymore, going to get that, wow.

Aliens-8-MyDad

08-13-2003, 11:59 PM

very very nice... got a estimated price? and will the rail be milled out as if it were a ULE rail..?

-=Squid=-

08-14-2003, 12:37 AM

personally I dont like the little ovals on the side.

INFERNO

08-14-2003, 01:31 AM

Crap. My spending is never going to end.:(

yeahthatsme

08-14-2003, 01:35 AM

i'm going back to a mag :O i mean omfg wow.....i'm just like :eek: how much is it gonna cost:confused: when can i get one:confused:!!!

terrorizer666

08-14-2003, 02:00 AM

nicad sent u a PM.

sniper1rfa

08-14-2003, 05:51 AM

nicad, the program your using renders a pretty crappy black....

:P

Very nice.

jdev

08-14-2003, 06:12 AM

wow.

looks like i found a new body/rail combo for my mag.

and, same question as everyone else.. will you me milling out the rail so it is like a ULE rail?

great work colin!

.joe.

spydervenom

08-14-2003, 10:53 AM

alright, i'm buyin a mag

grr..

Riotz

08-14-2003, 10:58 AM

Wow that's really nice. Something about the claw from the xmag though. I dunno what, but I like it.

Trauma

08-14-2003, 10:59 AM

that is the best automag body I have seen yet, if those are made, beauty and performance will be back in the automag for sure

Riotz

08-14-2003, 11:00 AM

Oh it reminds me of like those Nike sneakers with the zipped or like a Sony CD player or something. Just the white one though.

Creative Mayhem

08-14-2003, 11:03 AM

Very nice.... But is it a sluggo milled down or a block to finished product? I have heard of some bodies(not mentioning any names) have had issues with tolerances, and things not lining up properly. Before i spend money I need to know these things ;) Thanks

CM

Duke Henry

08-14-2003, 11:36 AM

Geez I wish people could make nice bodies like this, but in warp left styles...

:(

srrdude

08-14-2003, 12:09 PM

looks like an orracle..

Jack & Coke

08-14-2003, 12:11 PM

Will this come with duel detents?

nicad

08-14-2003, 12:17 PM

these will be milled from true AGD Slugs and AGD rails.. no worries about tolerances here. :)

no warp styles until there is a warp Slug available..

sniper- rendering black is the least of concerns in the progam i use.... so.. so.. THERE! :-p

Miscue

08-14-2003, 12:19 PM

Awesome!

Splat

08-14-2003, 12:40 PM

if you do make one... you gonna make a red one?? mebby mismatch colors?

My mini is red/black

red frame rail/black body?

rikkter

08-14-2003, 12:55 PM

nicad, you still haven't mentiond if you could do this to emag rails

magnj

08-14-2003, 12:57 PM

very nice. If I had an Emag, that would be on it

Splat

08-14-2003, 01:12 PM

I posted this in the other forum for your other body style. But what is the likly hood that this will be made?

Duke Henry

08-14-2003, 02:37 PM

Originally posted by nicad
these will be milled from true AGD Slugs and AGD rails.. no worries about tolerances here. :)

no warp styles until there is a warp Slug available..

sniper- rendering black is the least of concerns in the progam i use.... so.. so.. THERE! :-p

Note to AGD - let's see some warp SLUGGO'S!!!!

:D

dansim

08-14-2003, 02:53 PM

looks like a sneaker, i love it, im looking for a new body i ever feel like skipping the warp part of my ule mag i will buy one 99% sure

Rotadw

08-14-2003, 05:41 PM

well now that is a cool mill job.... glad to see someone with a brain... making a marker body w/out that stupid sight rail screwing up the whole flow. looks good smooth, natural like it was ment to be.

BajaBoy

08-14-2003, 06:20 PM

Originally posted by rikkter
nicad, you still haven't mentiond if you could do this to emag rails

i know:rolleyes: This thing is so hot looking, i just hope they arnt a Ton of money like the other one (250$ wow) and that didnt have a rail.

nicad, i really cant tell you how nice that looks!

SomebodySomeoneRTPcf

08-14-2003, 06:38 PM

Every1 wants to know when they come out, where they can be bought, how much, and why do you guys rule in design.

ah137

08-14-2003, 09:18 PM

I think it would flow better without the line and dots circled here

~Hills

Taco

08-15-2003, 01:24 AM

awsome

FooTemps

08-15-2003, 01:31 AM

Originally posted by ah137
I think it would flow better without the line and dots circled here

~Hills

there's too much flat on that spot for the overal body, it doesn't fit right.

kenndogg

08-15-2003, 01:53 AM

wow..maybe this will finally give me a reason to invest in a mag....

USAF-Flyboy with a Mag

08-15-2003, 01:53 AM

Nicad...Ijust wanna say that looks F'in AWESOME :D

nicad

08-15-2003, 02:28 AM

hey Ken whats up? :)

sorry about not posting in a while yall.
im still alive.. but have been locked in a room hammering out toolpaths for this thing.
to answer a few re-occuring questions:

yes it would be possible to mill an Emag rail with this. I dont have one here so I havent been able to spec one out and model it to carve on. Im sure this is something we will take care of in the near future, cause this would make a VERY nice Emag setup. :)

they will be available as soon as i run proofing paths and multiple test runs on both the bodies and the rails. im working extra hard on this design to get the milling cost and cleaning/polishing costs as low as possible. Since this design incoperates the rail (it doesnt HAVE to, the body will work just fine on any rail you already have), that alone adds to the cost.

I plan to mill the first Dallara body/rail in the next few days. I assure you I will post pics asap! :)

back to work..

rikkter

08-15-2003, 02:30 AM

i'll give you my emag rail if you need one to get the measurements if you need it. cause i oh so plan on getting one of t hese

arowmic

08-15-2003, 02:36 AM

Kenndogg! Sup man.

kenndogg

08-15-2003, 04:03 AM

nothing much man, just chilling. didn't see you out at pov this past sunday. well enough of cluttering up nicad's thread.

FooTemps

08-15-2003, 04:28 AM

... I think agd should make sluggo everything... then i could get a matching dallara y-grp! haha

Creative Mayhem

08-15-2003, 01:07 PM

Let me start by saying, "It's not that bad..." and then let me say... "looks good on a Cocker." :D JK man, sorry to see you spend money and get a poor job. Hope it works out for you the next time you decide to anno it. :)

CM

rikkter

08-15-2003, 01:44 PM

Originally posted by Creative Mayhem
Let me start by saying, "It's not that bad..." and then let me say... "looks good on a Cocker." :D JK man, sorry to see you spend money and get a poor job. Hope it works out for you the next time you decide to anno it. :)

CM

lol eh, why do i get the feeling you posted this in the wrong thread?

shinobidice

08-15-2003, 02:15 PM

would it be possible to have the people send you rails to mill that would go with thier bodies? like say i send you my rail and $x then you send me rail + body? Theoretically it should work out fine if they are milled seperately but so they match up right? or would you need to do them together to make sure they mathc up?

Blazingace

08-16-2003, 01:13 AM

All I can say is SIGN ME UP!!!! You got a definate pre order here. I think that is the best effort anyone has done to date. PM or E-mail me with details of what you need to get one of these started for me.

nicad

08-16-2003, 02:49 AM

it should be theoretically possible to to mill the rail seperatly.. but couldnt gaurentee a perfect alignment.. should be close enough tho.

have been and still am working on getting one of these properly milled out. slow progess...
will update again later.

out!

gibby

08-16-2003, 11:31 AM

HOLY MOTHER EFFER! That body/rail thing looks sweet!! I would buy that in a heartbeat! Hrm...can you do that with an Emag rail too? ;)

rikkter

08-16-2003, 12:27 PM

Originally posted by gibby
HOLY MOTHER EFFER! That body/rail thing looks sweet!! I would buy that in a heartbeat! Hrm...can you do that with an Emag rail too? ;)

->

Originally posted by nicad

yes it would be possible to mill an Emag rail with this. I dont have one here so I havent been able to spec one out and model it to carve on. Im sure this is something we will take care of in the near future, cause this would make a VERY nice Emag setup. :)