View Full Version : lvl 10 and low velosity
Rumble
08-25-2003, 05:11 PM
i frequently play at an indoor field and the velosiy limit is about 250. will the level 10 go down that low?
lack of grace
08-25-2003, 05:24 PM
Input pressure isnt ball velocity....you can adjust your fps to what ever you like under 300 feet while feeding your valve what it needs. ir (500 - 1000) Classic vs. uber reactive xvalve
Rumble
08-25-2003, 05:25 PM
ok i have a PMI preset, at 850.... u think it will work?
nt2004
08-25-2003, 05:26 PM
i can get mine down to around 160 or so(I made an indoor feild in my basement so i had to get it as low as possible for the rubber paintballs) and up around 380(completely by accident) and this is all with the shortest spring
lack of grace
08-25-2003, 05:27 PM
it should work fine...
Rumble
08-25-2003, 05:27 PM
ok thanks guys
Evil Bob
08-25-2003, 07:04 PM
I use the middle spring and I can chrono as low as 200 before I get bolt stick and it refuses to fire. Using the longest spring, the lowest I could chrono before bolt stick was 265.
So if you run into bolt stick trying to drop down to indoor velocities, just switch to a smaller spring.
-Evil Bob
Mag Master 04
08-25-2003, 09:00 PM
im chillin sumwhere around 255 with a 10 inch ultralight so im doin pritty good, and it still stops on paper and kicks like you wouldnt believe...good 'ole ReTro
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.