View Full Version : gettin ACI 6 stage expansion chamber need help...
laxster08
08-25-2003, 05:59 PM
will one steal brade work...one going from the ASA adaptor to the x-chamber...b/c i see some guns with x-chambers with one steal braid on top and bottom...so will i bet set with one steal braid...i have a vertical adaptor..thanks
banzaimf
08-25-2003, 06:10 PM
One hose should go from the bottomline to the bottom of the expansion chamber, the other hose will feed the expanded Co2 to the gun
edit: ascii art sux
laxster08
08-25-2003, 06:12 PM
ok...where does it hook up to the gun
banzaimf
08-25-2003, 06:16 PM
There is a NPT threaded hole in the valve, It should be on the right side. You'll probably need an elbow as well
The Ralpst
08-25-2003, 11:36 PM
I've got an ACI 6-stage on my Mag and this is how I did it:
Bottom line to exp. chamber. (I took an allen wrench and unscrewed the bottom part, which took some effort. I then lined it up so the hose went straight from the bottom line to the chamber and re-tightened. Like I said, took some effort but is worth it.)
Expansion chamber mounted vertical bottle.
Macroline (for taking the valve off purposes) running from vert bottle to valve using the 90 degree elbows supplied with macroline kit.
Works like a dream... for having to use Co2...
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.