Thank the gods !!!
In conclusion to my "RT Mag Woes" I will explain how I fixed the problem and what I think happened.
I believe when I installed the Lvl10 kit the pressure safety kicked in and that was the initial leaking I heard. Of course changing the Banjo o-rings didnt help anything. I then replaced the on/off pin o-rings. That didnt help either. So i took the Lvl10 out and reinstalled the stock parts and replaced the remaining orings in the gun. Still it leaked. So I was about to order another on/of assembly and banjo bolt. Then it hit me. I'll swap the assembly with my Xmag one. The leak stopped when I put it in my RT. So I took the small on/off oring out to inspect it again, and sure enough there were two small nicks in the underside of it.
I replaced it with the original and no more leak.
So I reassmbled my Xmag and had another leak !!! After knocking my head against the wall for about 20 minutes thinking I had transffered the problem from one gun to the next, I realised it was venting from the little side hole for the pressure relief. I lowered the velocity nut by about a half a turn and the leaked stopped !
I am glad it is working and am stoked to be able to play with it this weekend.
Thanks again for everyones input and help.
In conclusion to my "RT Mag Woes" I will explain how I fixed the problem and what I think happened.
I believe when I installed the Lvl10 kit the pressure safety kicked in and that was the initial leaking I heard. Of course changing the Banjo o-rings didnt help anything. I then replaced the on/off pin o-rings. That didnt help either. So i took the Lvl10 out and reinstalled the stock parts and replaced the remaining orings in the gun. Still it leaked. So I was about to order another on/of assembly and banjo bolt. Then it hit me. I'll swap the assembly with my Xmag one. The leak stopped when I put it in my RT. So I took the small on/off oring out to inspect it again, and sure enough there were two small nicks in the underside of it.
I replaced it with the original and no more leak.
So I reassmbled my Xmag and had another leak !!! After knocking my head against the wall for about 20 minutes thinking I had transffered the problem from one gun to the next, I realised it was venting from the little side hole for the pressure relief. I lowered the velocity nut by about a half a turn and the leaked stopped !
I am glad it is working and am stoked to be able to play with it this weekend.
Thanks again for everyones input and help.