Major Problem!!!!!!!!!!!!!!

[davidpost85]

I have a minimag. I have a leak in it. Ok, i can fire the gun, but when i let go, the bolt moves forward and it starts to leak, this is really tickin me off, because i have done everything i can think of to try and fix it, but nothing has worked. I really need some help.

[Dayspring]

Sounds like an on/off problem or a spacer problem.

BTW- A minimag and an automag are the same gun w/ different bodies.

[rikkter]

yeah, sounds like bolt stick. if you dont have one pick up a PT(powertupe) spacer kit, and following the instructions on it accordingly to your problem

[Peach]

If its leaking down the barrel you just need a shorter spacer. If you purchased it like I'm sure AGD can send you one, or just buy the lvl x if you are planning to do it eventualy(You dont need the spacers for the lvl x)

[athomas]

Yeah, sounds like a spacer problem. Use a shorter spacer in the power tube.

[paint magnet]

Also, check the bolt spring, it may be worn out. If it's a level 6.5 gun (or anything before l 7) then it may be a powertube spring. Also check your on off assembly for any messed up orings and to be sure the brass piece is in right side up.

[paint magnet]

Also, you can see that I own all of the guns you were considering and I have to say the mag is definately the best for the money.

[Nobody077]

Sounds like the powertube spacer/spring or powertube o-ring. Early level 7's have powertube springs(my lv7 does), if you have the spring just get a spacer kit and swap it out.

[b__winkler]

check the bottom most o-ring in the on/off assembly (the little bright white one that fits around the on/off pin) if it is a loose fit the gun will continue to leak down the barrel when the trigger is pulled. This happens more often then the powertube spacer problem people always speak of.

[Brain Donor]

Tough question on the poll ... best gun for the money.

In My Opinion:

The Angel is out ... that part is simple. great guns, but expensive for what the other 3 can do.

The Minimag is out. Looks better, but is also more expensive for the same thing as a Powerfeed Classic.

My choice was between the cocker & Classic mag then ... and I chose the autococker. I almost clicked on Automag, but then I thought - 'cockers can run great on CO2, Automags are very HPA biased. It can run on CO2, but it takes some work.

However, if I owned a field, automags would be the rental gun for the simple facts that I would have HPA, and 'mags are extremely easy to clean - hose them off, keep them oiled ... done!

[RamboPreacher]

Blazer.
but since you didn't list it, I chose the automag.