Hey yall, I just picked up a centerflag hyperflow 201 adjustable, on/off hpa system at my pro shop off the consignment counter. Therefore it doesnt come with any manuals. I found an article on Warpig that shows how to tear it down, but not what lubes to use. I have a few questions.
can I reposition the guages/fill nipple/gun outlet? the reg is setup like this
edit: it's kinda hard to understand, just think of it as swapping the guages for the ports
fill: top left
gun: top right
LPguage: bottom left
HP guage: bottom right
as you look at it from the front. Can I swap the guages for the fills/exhausts?
I'd like
HP Guage:top left
LP guage: top right
Gun: bottom left
Fill:bottom right
do i have to use purple loctite to put the guages back in too? is teflon tape too low duty? it's a 4500 psi tank
Just wondering.
What lube can I use to re-build the reg? Can I use lubrimatic/stant white lithium grease on it?
and lastly, does the benchmark cradle for this tank work with standard dovetail drops?
warpig thing http://www.warpig.com/paintball/tech...01/index.shtml
benchmark thing
http://www.benchmark-man.com/products002.html at the bottom
Thanks yall
Purple
can I reposition the guages/fill nipple/gun outlet? the reg is setup like this
edit: it's kinda hard to understand, just think of it as swapping the guages for the ports
fill: top left
gun: top right
LPguage: bottom left
HP guage: bottom right
as you look at it from the front. Can I swap the guages for the fills/exhausts?
I'd like
HP Guage:top left
LP guage: top right
Gun: bottom left
Fill:bottom right
do i have to use purple loctite to put the guages back in too? is teflon tape too low duty? it's a 4500 psi tank
Just wondering.
What lube can I use to re-build the reg? Can I use lubrimatic/stant white lithium grease on it?
and lastly, does the benchmark cradle for this tank work with standard dovetail drops?
warpig thing http://www.warpig.com/paintball/tech...01/index.shtml
benchmark thing
http://www.benchmark-man.com/products002.html at the bottom
Thanks yall
Purple