Nice little ULE

[Mole1119]

Just grabbed some air and tried it out on my X. First rapid firing the mag is to much fun
I have been shooting mags for a long time and this was the first time I really took advantage of the RT effect.

The part is Hy-Lok Bleed valve part #BLV-2N
It made depressurizing the line and adjusting the input pressure a breeze. Just shut off air to the reg using the built in on/off then open the bleed valve and vent the pressure. Adjust the regulator, ensure the bleed valve is closed and try again.

[need4reebs]

nice!!! as long as it works man! wat are those called? just a regular ball valve? im still learning the names of this kind of stuff. wats Kool is its at the bottom of tha reg and it doesnt look like it sticks out past the tank...so that cant really get in your way right?

[Mole1119]

Ya I got the npt plug out tonight, had to put an allen wrench in the plug and then put a torch on the wrench to transfer the heat. There was so much red locktite on that thing.

Here it is all assembled


I wish it was a tad shorter but I am going to try it out, I still need to put air through it, will probably try that this weekend. If it feels to bulky playing i may try one of those in line slide checks, those looked pretty small.

[need4reebs]

I got the valve last friday, it is a little bulky but it should do the trick. However I snapped a hex head socket trying to get an npt plug out of the body of the regulator. I post some pictures when I have some time.

kool kool...lemme know if you need any air fittings? i have some extra macro and micro fittings, elbows, T's, and plugs that ill be looking to get rid of.

did you get tha npt plug out of the reg???

[Mole1119]

I got the valve last friday, it is a little bulky but it should do the trick. However I snapped a hex head socket trying to get an npt plug out of the body of the regulator. I post some pictures when I have some time.

[need4reebs]

Ya, I will post it up once I verify it works

did you ever get that valve? did it work?

[need4reebs]

As promised, here's some pics of Venom Deluxe Highline on my SmartMag.

[Laku]

As promised, here's some pics of Venom Deluxe Highline on my SmartMag.

[need4reebs]

maybe someone has already tried it already and once the see wat it is they can let ya kno if it werks or not? ya kno?

[Mole1119]

Ya, I will post it up once I verify it works

[need4reebs]

Nice that is pretty minimalist, I ordered a valve to try and vent the reg directly, I am going to try that first hopefully I get it this week.

do you have a link to tha valve you ordered for tha others wondering how to set up their airline?

[Mole1119]

A little more progress, aired it up and it shot fine.

[Mole1119]

Nice that is pretty minimalist, I ordered a valve to try and vent the reg directly, I am going to try that first hopefully I get it this week.

[need4reebs]

here are some pics using tha slide check in tha link from tha post above w/a Armageddon reg using Macro line...never had a problem w/tha macro line even with the reg cranked upto 1200psi:



and here are a few pics just using regular macro fittings, tha slide check, and a QD nipple attached to a gas thru bike grip:



just slide the slide check back to turn tha air to the marker off, disconnect the line and as your turning tha pressure of the tank down/off slowly bleed tha line with tha slide check:


same setup will work using S/S airlines as well. hope that helps???

[need4reebs]

hey dood check out these slide checks:
http://www.ebay.com/itm/Paintball-Re...item3a8042bdb1

this auction is for 2 of them...they are very useful for wat your wanting to do as well as for testing pneumags, LPR's...stuff like that.