RPG-Force Mag

[OPBN]

That's been my "next" project for months now. Just finishing up some custom work and had to do some personal work around the casa. Gonna sit down and start designing pretty quick.

Out of curiosity are you thinking about something that just houses the LPR or something with the LPR integrated? You milling your own internals or using already available ones like Palmers?

[luke]

This is why someone needs to come up with a nice foregrip with an integrated LPR.....

That's been my "next" project for months now. Just finishing up some custom work and had to do some personal work around the casa. Gonna sit down and start designing pretty quick.

[OPBN]

This is why someone needs to come up with a nice foregrip with an integrated LPR.....

I agree though, until that time arrives double tap the VASA and run in one side and out the other.

[need4reebs]

"if it were me" id tap the other side of the VASA and run your fittings from the drivers side of the gun to the grip, then passenger to the valve... if you wanted to go super

actually that was kinda how the first set up was...i just didnt put the second macro line...hey man get outta my head dood...haha...but i really didnt like tha airline set up that way...so i set it up with the T fitting to see if i like that and i do so a black T fitting is on the way so its all good!!!

its already Super yo!!! haha

[need4reebs]

i dont like it.

awe man i better scrap it...KNM dont like it...haha...thank you sir!!!
its a Sa WeeT lil face painter man...i love this lil set up! peace big Dawg!!!

[knownothingmags]

reebs got it dont worry his guns will rock

[Cokrkilr]

"if it were me" id tap the other side of the VASA and run your fittings from the drivers side of the gun to the grip, then passenger to the valve... if you wanted to go super

[knownothingmags]

i dont like it.

[need4reebs]

Updated me G-Force Mag again...didnt get the Internal LPR set up done yet so mad an alternative mod inspired by good 'ol Hill! using the LPR as the fore grip. took a 10 rd tube and cap, cut it to fit inside a the rubber AGD bike grip, cut a small piece of warp feed hose to keep the bottom of the grip sturdy, the 10 rd tube fits very snug inside the warp feed hose, cut a slot from the 10 rd tube to make room for the 90* barb fitting on the LPR, trimmed the inner top part of the bike grip so the hose wont kink, used a asa reducer for tha LPR, ran the LPR hose thru the G-Force frame, hooked up the Air Line prolly 5 different ways ...haha and called it a day!!!

pics:

first try w/2 separate air lines:



Second try with a messed up plumbing job...i wasnt drunk enough to to get it right this time...but tha pics show the LPR:



and finally a lot o beers later a nice clean set up...but that Brass fitting is killing me man...so ill try to find a black street T and a black straight and 90* Macro fitting to finish this up nicely:



oh hells yeah...aint modding fun...haha...hiccup?:rofl:

[need4reebs]

^^^That foregrip is so dope! hahahahaha

its a Cerberus fore grip! Jay also made the Airwalk V1 and V2 and StormWalk frames, a few Z-Crippler frames, and quite a few Pump kits. as well as some nice panel grips for other frames.

[ninja3454]

^^^That foregrip is so dope! hahahahaha

[need4reebs]

was Swapping some parts around while waiting for some parts to get back from ano and this is how the G-Force Mag looks now G....haha

"X-Valve" x-valve
Dallara rail
RPG Pariah body
RPG Subzero
CI Knuckle fore grip
Freak back
WWW 1.5" shorty tip
G-Force Frame w/PPS Micro Rock
CP direct mount on/off ASA
CCM air fittings

[need4reebs]

Didn't know that. Guess I have to make that decision fast.

only 3 slots left man?

[Carnage reigns]

did you reserve your spot with warp...he only has a few more slots left? not sure if he will be done for good or just for right now?

Didn't know that. Guess I have to make that decision fast.

[need4reebs]

Maybe CF tube and CP barrel backs. I have the Stiffi front already so that's the next move.

did you reserve your spot with warp...he only has a few more slots left? not sure if he will be done for good or just for right now?