http://people.ne.mediaone.net/peter-...peters_rt1.jpg
RT Pro
CP Flame Drop Forward
PMI PE2001 Regulator
Stock barrel
Powder coated by Ken Wenlasky of K&P Customs
Printable View
http://people.ne.mediaone.net/peter-...peters_rt1.jpg
RT Pro
CP Flame Drop Forward
PMI PE2001 Regulator
Stock barrel
Powder coated by Ken Wenlasky of K&P Customs
Soon to have warp feed
Nothing special... but here is a pic of my current mag and case. The case is a Pelican 1600 and as you can see from the pic it holds my mag and warped df, a revy, 2 spare batteries, a Vlbow, my ND 68ci Tuffskin, a barrel plug and it has tons of space left over:
http://home.earthlink.net/~lvazquez/mymag2.jpg
http://home.earthlink.net/~lvazquez/case2.jpg
cphilips new E-Mag
http://albums.photopoint.com/j/View?...897&p=55783017
cphilip... Nice... real nice...
Hey nice case (and of course nice Mag too) ;)!Quote:
Originally posted by LuisV
Nothing special... but here is a pic of my current mag and case. The case is a Pelican 1600 and as you can see from the pic it holds my mag and warped df, a revy, 2 spare batteries, a Vlbow, my ND 68ci Tuffskin, a barrel plug and it has tons of space left over:
How did you cut the space for Mag, bottle, ... and what material is it?
Thanks for your kind comments.... The Pelican case comes with 2 layers of "cubed cell" foam, a final bottom layer and a top "egg crate" style foam; therefore 4 layers of protection. The "cubed cell" foam is a series of rectangular shaped "cubes" that are perforated together. It allows you to "pick and pluck" the desired shape of the cutouts. I traced all my equip on paper and cut them out, then tooth picked the paper templates in place and began to "pluck" the little cubes out. I constantly double checked durring the process to avoid mistakes. Once I was done I sprayed 3M glue adhesive in between the 2 layers of "cubed" foam so they wouldn't come apart nor shift in transit. You can find more info on Pelican cases here:Quote:
Originally posted by Manuel_FZR
Hey nice case (and of course nice Mag too) ;)!
How did you cut the space for Mag, bottle, ... and what material is it?
http://www.pelican.com/main.htm
http://www.pelican.com/product/cases/1600case.htm
http://www.cases4less.com/
Be aware that the case is rather expensive, but the build quality is awesome!! They are waterproof and airline proof cases!!! You can also purchase replacement foam in the event your configuration changes. Personally I bought my case on Ebay for almost half of what it goes for on-line:
http://search.ebay.com/search/search...y=pelican+case
Cases4less is a good dealer with good prices and shipping times. Hope that helps... :)
LuisV: Thanks for that interesting answer. Now I think, it´s the ultimate case! ;) I have to save first the money for a RT ... and then for the case ;)
Yeah, Pelicans are nice. But danged heavy! 'Specially full of gear
Well, it's finally done to my satisfaction. I had to notch out a bit of the first 'hump' in the benchmark foregrip to get it to fit with the Intelliframe, but it worked well, and you can't see the bare metal unless you really look closely. (Shoulda done that BEFORE it went to redrider... my bad!) Dremels are good! Heck the black Intelliframe even looks purple under the right light! Woo hoo!
Also you can see that I got the intellifeed mod working. I've got to reposition the switch a bit, so it engages sooner in the pull... but it works well.
Yes And for that reason I went with the Pelican 1610 for mine. It has wheels and a handle like a luggage case. And its about 2 inches deeper but same other dimentions as the 1600. I just put the E-Mag in mine but need to get some picts up of it. I can leave the warp and tank all on and a slot for the barrels still remains. The extra depth allows this. Its three faom layers deep instead of two.Quote:
Originally posted by PigSweat
Yeah, Pelicans are nice. But danged heavy! 'Specially full of gear
Quote:
Originally posted by cphilip
Yes And for that reason I went with the Pelican 1610 for mine. It has wheels and a handle like a luggage case. And its about 2 inches deeper but same other dimentions as the 1600. I just put the E-Mag in mine but need to get some picts up of it. I can leave the warp and tank all on and a slot for the barrels still remains. The extra depth allows this. Its three faom layers deep instead of two.
Cool... I can't wait to see a picture!!!! :)
Luis here is a teaser photo to hold you over. Its a bit dark and is the case itself not showing the Emag in it but I think you can make out the handle in the up extended positon. I'll get a better one over the weekend.
http://albums.photopoint.com/j/View?...897&p=53731412
Nice... I can't wait to see the inside. So you have 3 layers of "pick n pluck" foam? Or is that 2 "PnP" layers and one bottom foam layer... cause that's what I have!?!? Just curious...
It has three layers of pluck and pull and an then an egg crate layer about a bit more than an inch to an inch and an half thick in the top and in the bottom as well.
I took out the one layer of pluck and pull (didn't use it) and use the two egg crates and used two of the pluck and pull and it worked real good.
Look at these on this site. Its were I got mine. $169 plus $5 shipping. Good picture of the #1610 at the bottom of the page.
http://www.swpublicsafety.com/pelicancases.html
really cool cases! ...not available in Germany :(
I have a toolcase and found some foam that fits good in the case. then I got my cutter and cut my Mini out. The barrel is in a foam material water pipe isolation ;).
My MicroEmag....
Cool stand. Did you make it yourself?
StanBo,
I bought it at a local store.
Hey I just noticed that you are from Jersey. Could you tell me what shop you frequent?
Thanks.
StanBo, I get my stuff at MI Paintball in Long Branch, NJ. Where do you go in the City?
I play at Top Gun Paintball mostly. I went to Paintball Long Island once and plan to stop there again.Quote:
Originally posted by ralicea
StanBo, I get my stuff at MI Paintball in Long Branch, NJ. Where do you go in the City?
I like the level of players at Top Gun but I am getting to used to the fields and I am not learning anything.
My friends and I are going to Top Gun on November 17th. Come play with us if you like!
Eh crappy camera... Crappy mag I no but im gonna show it ya I know there isnt a revolution...
http://www.hunting-pictures.com/memb...ad/mymag02.jpg http://www.hunting-pictures.com/memb...ad/mymag03.jpg
Minimag
My Retro mag with warp, Itelliframe, and warp left body.
My digital cam pics aren't comming out and regular camera pics didn't come out so now i resort to scanning my gun....jsut got the body back friday..
1 more
:D Time for a test drive.
The HALO... where did you get the HALO? :confused: