Back instock!! Xmt rt, minimag + new hex ule bodies. Pump milled available!!

I had a ton of people ask me for more MM and RT ULE bodies this winter. I ran out last fall, but
I have more instock now.

I have added a new style to the line up. AO inspired HEX milling in the front instead of the round holes or slots.

I will post pictures of the HEX body tomorrow

Specs
- These work with all automags except the classic RT and Sydarm.
- 7075 aluminum construction. Shipped raw polished
- Threaded for Angel feedneck, Dual Detents (AGD ULE Detents work the best in my opinion)....Feedneck and detents not incluced.
- Threaded for autococker barrels

3 or 4 hole HEX, RT or minimag body: $225
Shipping: $12
Pump milling service available on these : $30

Special Prices on Autococker threaded barrels if you guy a body.
Autococker threaded RT Barrel with no stainless tip (put your own on it...they screw on) $30
Autococker threaded AND Freak bored RT Barrel with no stainless tip (put your own on it...they screw on) $50
PM me to order. These will be ready to go starting early next week. QTYS LIMITED

Bodies Top to bottom
1. 4 Hex
2. 3 Hex
3. RT
4. Minimag
5.RT Hex
Attachment 102459
Attachment 102460
Attachment 102465
Attachment 102466
Attachment 102467

I kicked myself for not getting one of these on your last run so im gonna be grabbing at one pump milled, I'm excited to see what the hex body looks like, thanks again for doing these

the question is whicj will look the best with a cerebrus pump kit

Quote:

---

Originally Posted by tbaggin

the question is whicj will look the best with a cerebrus pump kit

---

What kinda question is that? They'll all look badass, you can't lose whichever choice you make.

Sent from my SM-G975U using Tapatalk

Machining complete on orders that were placed/paid for yesterday. Wrote pump mill program for the new machine.

Deburr/polish tomorrow. Ship as soon as boxes come in early next week. These are made to order. Too many designs to stock them all now.
Attachment 102461

These are awesome, I really like the new look.

It looks like I see a clip channel, did you switch from the AGD washer to a spring cup design?

Quote:

---

Originally Posted by luke

These are awesome, I really like the new look.

It looks like I see a clip channel, did you switch from the AGD washer to a spring cup design?

---

Thanks

Nope...same as always.
I pump milled that Minimag.

Quote:

---

Originally Posted by Xmagterror

Nope...same as always.

---

Ahh, then what I see must be where the bore changes..

Sterling work as always. With absolutely no need of yet another body, I still feel the urge to buy one...
Btw, would it be possible to get the HEX body with the slanted front as on the RT? My inner aesthetics nerd yells to me that the combination of slanted front, and offset hex-holes would look absolutely swell.

Quote:

---

Originally Posted by Olsson

Sterling work as always. With absolutely no need of yet another body, I still feel the urge to buy one...
Btw, would it be possible to get the HEX body with the slanted front as on the RT? My inner aesthetics nerd yells to me that the combination of slanted front, and offset hex-holes would look absolutely swell.

---

I already asked xmt about that, unfortunately, it's not available as an option at this time.

Sent from my SM-G975U using Tapatalk

Quote:

---

Originally Posted by Gundam V

I already asked xmt about that, unfortunately, it's not available as an option at this time.

Sent from my SM-G975U using Tapatalk

---

"#¤&%¤&"$£3*€&$!!!!!

Quote:

---

Originally Posted by Olsson

Sterling work as always. With absolutely no need of yet another body, I still feel the urge to buy one...
Btw, would it be possible to get the HEX body with the slanted front as on the RT? My inner aesthetics nerd yells to me that the combination of slanted front, and offset hex-holes would look absolutely swell.

---

I was thinking the same thing and was going to ask, lol.

LOL.

You guys always get what you want.
HEX RT

Pictures posted

Quote:

---

Originally Posted by Xmagterror

LOL.

You guys always get what you want.
HEX RT

Pictures posted

---

That looks great! You the man!

Quote:

---

Originally Posted by Xmagterror

LOL.

You guys always get what you want.
HEX RT

Pictures posted

---

It looks as good as I imagined. If you do a run in the future and offer these again. I'll have to pick up one of these, since I already placed an order for a minimag and the original 3 hex. As for the other 2 posts about it, you guys lucked out on it.

Sent from my SM-G975U using Tapatalk

Quote:

---

Originally Posted by Gundam V

It looks as good as I imagined. If you do a run in the future and offer these again. I'll have to pick up one of these, since I already placed an order for a minimag and the original 3 hex. As for the other 2 posts about it, you guys lucked out on it.

Sent from my SM-G975U using Tapatalk

---

If you would rather have the RT Hex no prob

Quote:

---

Originally Posted by Xmagterror

If you would rather have the RT Hex no prob

---

If it wasn't cut yet, I'll take you up on it. If it was already done, nah that's cool. I'm fine with it, it still looks cool anyway. Minimag or rt style, it still awesome anyway.
[emoji16][emoji16][emoji16]

Sent from my SM-G975U using Tapatalk

Well, I'd better own up, and put the money where my mouth is... On the other hand - it looks even better than I thought.
Please put me down for one RT-Hex-body, pump milled please, and one of those fancy schmancy freak bored RT Barrels, including the stainless tip.

Quote:

---

Originally Posted by Olsson

Well, I'd better own up, and put the money where my mouth is... On the other hand - it looks even better than I thought.
Please put me down for one RT-Hex-body, pump milled please, and one of those fancy schmancy freak bored RT Barrels, including the stainless tip.

---

PM sent with ordering instructions.

$$$ sent, and PM replied to.

Can I get a four hole hex rt?

If so I’ll take freak bored barrel also

I’d like one rt hex, send me into please

I'll take an RT Hex & a freak bore RT barrel.

PM'd you

I've got a Minimag body in stock, ready to ship

I’ll take a hex 3 hole

I’ll take a Minimag body. What’s the PayPal adddress?

I still have a few bodies available.
Gets yours before they're sold out.

Quote:

---

Originally Posted by Xmagterror

I still have a few bodies available.
Gets yours before they're sold out.

---

What's left? Got a minimag style left...? ��

-Connor

Quote:

---

Originally Posted by conbon

What's left? Got a minimag style left...? ��

-Connor

---

Yes
Shoot me a PM for my paypal address.
Thats 225 + 12 for shipping.

Just a few left guys. get them before i run out for the year.

I’m interested, not sure how to send a message on this thing.

Quote:

---

Originally Posted by BoulderThrower

I’m interested, not sure how to send a message on this thing.

---

Yes i have one for you.
paypal xtcustoms@hotmail.com $237
and ill get it shipped off to you.

Which style is it? Minimag, hexagon?


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by BoulderThrower

Which style is it? Minimag, hexagon?


Sent from my iPhone using Tapatalk

---

Minimag

Messaged.

Quote:

---

Originally Posted by Xmagterror

Minimag

---

I messaged you


Sent from my iPhone using Tapatalk

Message sent

Ive still have a few left guys. I can supply all the designs.

Do these still need to be anno’d or are they ready for field use?