KAM M86 V2 Frames: Fresh Batch

IN STOCK NOW!
The KAM Designs M86 V2, A double trigger version of Cougar20th's classic M86 frame and stylishly paired with the Magnus Sabre Trigger.

https://i.postimg.cc/L6b5rX0C/M86-V2-Pic-1.jpg
https://i.postimg.cc/MpfHxSCW/M86-V2-Pic-2.jpg

Specs:

• Gloss Black Anodizing (Triggers came out more semi-gloss).
• AGD Spec where it counts.
• Mounting for Fabco MSV-2 & Clippard MPA-3
• Tapped for Sleeper LPR mount Capability. The frame will be tapped 1/8NPT on the bottom but. You will have to modify the MSV-2 & its mounting plate. It will not come modified.
• Frame accepts 2X E-mag trigger magnets above the forward trigger stop.
• Can be used on twistlock guns or non twistlock.
• Sear release hole for use on pnuemags.
• AGD Safety compatible. (Safety NOT Included)
• All Stainless Steel screws/pins
• Magnus Sabre Trigger included, Forward & back stop setscrews.
• Grip Panels included.

These M86 V2 frames will be $250.00 + Shipping and these are Ready To Ship now
PM me or purchase them here:
https://www.conradcustoms.net/produc...designs-m86-v2

We are willing to ship internationally.

And just for fun, we borrowed a build pic or two that had these M86's on them:

https://i.postimg.cc/qRvMGjYM/Dallar...Complete-2.jpg

https://i.postimg.cc/1tqZWB3v/FB-IMG-1538757927227.jpg

Screw Layout
https://i.postimg.cc/nc3PD9CV/temp-F...710-113709.jpg

Interested in one please.

Quote:

---

Originally Posted by stircrazzzy

Interested in one please.

---

Caught up on PM's. Thank you!

Just placed my order last night. Thanks for the fast communication and shipping. My plan is to get this modded for a banjo bolt. Thanks for putting this run together.

Quote:

---

Originally Posted by Bunny

Just placed my order last night. Thanks for the fast communication and shipping. My plan is to get this modded for a banjo bolt. Thanks for putting this run together.

---

Keep us updated with the build, Bunny!

Probably should have posted sooner.

Figured I would bump this for the Conrad Customs guys.

After they got their hands on one of the initial M86V2 frames I sold at the end of the last M86 run they wanted to stock some so I obliged them. As it meant no preorder wait for the end buyers. These are identical to the initial M86V2 frames.

'Rona bump. While the current pandemic-event is a downer in a lot of ways, it finally got the gang here all back home and may finally free up some milling time (or rather has allowed us more shop time with the whole "shelter in place" order.)
Cooking up some cool new stuff, and still have a handful of these. Stay tuned!

PM sent on any leftover frames.

Pm sent

Responded to both of you. Thank you again!

Which pneumatics fit in here? Im planning on using the troll lpr what else do i need.

Quote:

---

Originally Posted by Mps18

Which pneumatics fit in here? Im planning on using the troll lpr what else do i need.

---

Fabco switch and clippard ram. I forget which. But both are available from Ryan(knownothingmags) as well as all the various fittings. Just tell him what frame you are using.

Edit: found the thread. https://www.automags.org/forums/show...ts-extra-Parts

Whats the best way to shorten the trigger pull?

Quote:

---

Originally Posted by Mps18

Whats the best way to shorten the trigger pull?

---

you can do it with the set screws . ill shoot you a video on FB.

pm'd

Sent from my SM-N960U using Tapatalk

All pm's and inquiries replied to.
AudioSlave's Fett Mag has got the urge building to put together a Mando-themed Mag. And Bunny's green Classic RT mag has really got the ideas flowing for a Classic RT build. Corona needs to be done or the mags will start multiply again.

Start 2021 off with a new mag build! Now through the end of January 2021, if you combine your purchase of this frame with a preorder of either of Cougar20th's new products (V1 Snatch Grip or Evo V2 Foregrip) coming out and get a $25 discount off your M86V2 Frame purchase. Will just need to confirm your pre-order deposit to apply the discount.