Agg Mag (mQ-Valve)

**Chronobreak** · 04-25-2005, 04:57 PM

oops, i almost forgot about the bolt assembly and new spring assembly or w/e else like that..

still think my est isnt that far off though

**pump** · 04-25-2005, 04:58 PM

yeah your frame is sweet PBX

what about the dreamers pump version?

Magglerock · 04-25-2005, 06:20 PM

Originally Posted by PBX Ronin 23

We will be releasing the Autococker version of the mQ-Valve this week. As such, our next target is the release of the Automag version. We'll probably do some kind of pre-order for it as well. But this time the wait should be considerably less. Stay tuned.

Oh happy day!

When do you expect to start taking pre-orders?

**armyboot** · 04-25-2005, 07:38 PM

Are the two valves completely different? I've got an ebladed cocker and an old mag, it would be cool to swap 'em out...

**Jotsy** · 04-25-2005, 08:14 PM

sorry if this has been posted before.

would this be a drop in kinda kit for existing eblades? or would the eblade frame require modifying?

**Dayspring** · 04-25-2005, 09:11 PM

Yes, the mag version and cocker version are COMPLETELY different animals.

Essentially the cocker version is drop in. You need to remove the cocker valve, hammer, spring, basically EVERYTHING in the lower tube. You also remove the sear tripper solenoid and plug the mQ valve into that solenoid's socket (when you order, you need to let us know Race or Eblade, as the molex connectors are different.)

You use the SON time to control the dwell time. You also need a threaded IVG for this to work.

**onedude36** · 04-25-2005, 09:48 PM

mmm...tasty...

**ben-afficial** · 05-02-2005, 09:27 AM

yes, i do agree...toast is tastey

**armyboot** · 05-04-2005, 02:49 AM

Originally Posted by Dayspring

Yes, the mag version and cocker version are COMPLETELY different animals.

Essentially the cocker version is drop in. You need to remove the cocker valve, hammer, spring, basically EVERYTHING in the lower tube. You also remove the sear tripper solenoid and plug the mQ valve into that solenoid's socket (when you order, you need to let us know Race or Eblade, as the molex connectors are different.)

You use the SON time to control the dwell time. You also need a threaded IVG for this to work.

I know it was mentioned that the automag version will be next... I'm wondering will it be similar to the picture? As in using an eblade frame with a mag body?

I think I'd rather get the mag version rather than the cocker as I've always been a 'mag guy at heart.

Anyways, keep up the great work!

**hipster** · 05-08-2005, 09:42 PM

Ya when is the mag version coming, i want one
how much better would the cocker version be in my karnivore, will it still work I know the inside is alittle deffernt from a reg cocker

**Dayspring** · 05-08-2005, 10:39 PM

The karni version will work just fine. We just use a different cocking rod because of the Karni's internal cocking rod.

Magglerock · 05-11-2005, 04:20 PM

b u m p ?

**onedude36** · 05-12-2005, 10:27 PM

Did they release a timeframe yet? Ballpark wise?
Sorry, I got to the 5th page and could read anymore.

**WARPED1** · 05-13-2005, 01:34 PM

Originally Posted by penguinpunk555

It is better then a mag...

Lots of guns are.........(that being said, mags are good, still in the top 100).

**UTDragun** · 06-25-2005, 09:23 AM

revival in hope of mo' info

**WARPED1** · 06-25-2005, 12:06 PM

I still can't find a pic of a Q on a mag(the valve, not the loader).

____________________________

**Alpha** · 06-25-2005, 12:11 PM

An MQed pump...

I was lucky enough to shoot Nukkin Futs' friends MQed cocker, and it was quite... speedy.

**Jack & Coke** · 06-25-2005, 01:00 PM

Originally Posted by WARPED1

I still can't find a pic of a Q on a mag(the valve, not the loader).

Here you go...

from: http://www.unofficialpbxsite.com/htm.../PBXfuture.php

Here we see the MQvalve being adapted to an inline gun. This is in its preliminary stages. I have seen it shoot and it does show some nice progress. Again the MQ valve brings more efficiency and a reduction of parts to this gun. Many internal changes have also been made to this marker. Mel Maravilla, owner of PBX pictured with gun.

**WARPED1** · 06-25-2005, 01:25 PM

Thanks man. So, that "mag" is using an Eblade?

**Dayspring** · 06-25-2005, 05:18 PM

It's what they had at the time.

The real version will probably use the PBX frame, although, an Eblade will likely work as well.

**WARPED1** · 06-25-2005, 05:30 PM

Coolies.

**splat15k** · 09-16-2005, 06:56 PM

This thing still alive?

**Pha|anx** · 09-16-2005, 07:02 PM

Still in the works... Give it time.

**slade** · 09-16-2005, 07:07 PM

Originally Posted by splat15k

This thing still alive?

yes. yes it is. if there is an update, it will be posted. if it DOES die, it will be posted. since youre subscribed to the thread, either way youll know as soon as anyone else.

/im going to bed.

**r-unit** · 09-16-2005, 11:06 PM

Originally Posted by Pha|anx

Still in the works... Give it time.

due to the fact that i didnt read the whole thread, and i am stupid, is this actually going to be produced, if it doesnt die (obviously)? i guess what im asking is...are you guys seriously considering making this into a conversion for the mag?

**SIGSays** · 09-16-2005, 11:46 PM

pic isn't working

Thread: Agg Mag (mQ-Valve)

Thread Tools

Display

Posting Permissions