Lpr Fittings 90* And Straight Great for Pneumags

**p8ntbal4me** · 11-18-2007, 04:16 PM

Payment sent for parts listed.

Thanks DavErika!

~ Jai

**cyberave68** · 11-19-2007, 10:50 PM

Yea thanks JAI... Oh thats right
J = just
A = another
I = IDIOT (J/K)

And all domestic orders have been packaged, labeled, and will get droped off tomorrow. As for any international orders. I have to wait at the PO to send yours. I have a short lunch so i hope the lines arent long...

Thanks for all the order and your patients.....

**p8ntbal4me** · 11-20-2007, 05:58 AM

Sad part is we all KNOW you sat thru your lunch and looked at this post for some clever way to spin my name up.

Didnt know your line of work offered 2.5 hour lunches,.... you get those packages off or you still looking for excuses:

"Well I didnt get the packages off today as I was using my lunch for a more important matter (responding to some emergency emails), and the post office was jammed up with people anyways. Its located on Mulberry street, and we all know the amazing things you can find on Mulberry street.

**cyberave68** · 11-20-2007, 06:39 PM

Hahaha your a funny guy...lol

Originally Posted by p8ntbal4me

Sad part is we all KNOW you sat thru your lunch and looked at this post for some clever way to spin my name up.

Didnt know your line of work offered 2.5 hour lunches,.... you get those packages off or you still looking for excuses:

"Well I didnt get the packages off today as I was using my lunch for a more important matter (responding to some emergency emails), and the post office was jammed up with people anyways. Its located on Mulberry street, and we all know the amazing things you can find on Mulberry street.

Well actually i did get all the packages shipped... Except your. I held on to it so i could smash a couple of paintballs in the baggie holding your parts... Will be shipping it tomorrow for ya...

Let me know when you get your kits, I sent out quite a few....

Thanks again for your orders and patients...
Cyberave68

**p8ntbal4me** · 11-20-2007, 10:15 PM

Originally Posted by cyberave68

I held on to it so i could smash a couple of paintballs in the baggie holding your parts...

You should check the grounds @ Fox4 from the 20th.

From what I hear,... u sent more rolling out your barrel then breaking on any of the US team.

If you used your cocker for that long in a game with no air,.. theres bound to be a few lying around.

**jesterjin** · 11-26-2007, 01:02 AM

hey cyberave I'm interested in a kit,

I have a black logic vert frame and RT pro ULE setup.
I want the black barbs and black hoses with whatever will make the setup fit comfortably in the vert frame.

I have paypal ready just tell me what to do.

thanks in advance,

Brian

**DrunkenMaster** · 11-26-2007, 02:20 PM

I would like a kit as well sir
Just back in the game and I have checking these forums like crazy. Watching vids of pnuemags on youtube. I want to pnue my RT!!

**Thotograph** · 11-29-2007, 04:24 PM

If one is still available I'll pick up a kit in black please. I'm gonna pm you now to confirm and then I'll sned paypal when I here back... this is awesome and should make things really easy for me. Was just on ASP when my buddy reminded me that you have these complete kits available, and your prices are better.

**nmib** · 11-29-2007, 04:27 PM

I was his buddy, and I also need a full kit. PP waiting!

**Ruler_Mark** · 11-29-2007, 05:43 PM

sorry for the delay i've been busy myself,, gunna have to drop out sorry

**Digler45** · 12-01-2007, 09:10 AM

Any kits left? I would like one. pm me please.

**cyberave68** · 12-02-2007, 09:56 PM

Originally Posted by Thotograph

If one is still available I'll pick up a kit in black please. I'm gonna pm you now to confirm and then I'll sned paypal when I here back... this is awesome and should make things really easy for me. Was just on ASP when my buddy reminded me that you have these complete kits available, and your prices are better.

Mailed your kit tonight

Originally Posted by nmib

I was his buddy, and I also need a full kit. PP waiting!

PM sent

Originally Posted by Ruler_Mark

sorry for the delay i've been busy myself,, gunna have to drop out sorry

Its kewl, thanks for the info...

Originally Posted by Digler45

Any kits left? I would like one. pm me please.

PM sent...

The last of the orders have been sent out. More kits on the way. Didnt think i would need more so soon....

To all of those who have recived there kits and installed them... How did it go and any ideas to help make it better or easier?

Thanks again for all your support guys.....

**cyberave68** · 12-08-2007, 04:45 PM

Ok i have more kits ready...

No change in price....

I am waiting on some black fittings and they should be here soon. If you dont want to wait i have white fittings ready to go. I will shipp all orders soon as the parts arive...

Thanks,
Cyberave68

**hurleyhonda22** · 12-15-2007, 08:05 AM

where do you get your 3 way valves

**cyberave68** · 12-15-2007, 08:10 AM

i have a supplier i use....

All fittings and parts ready to go...

12 KITS READY TO GO FIRST COME FIRST SERVED...LOL

**BSSJackal** · 12-15-2007, 08:25 AM

Originally Posted by hurleyhonda22

where do you get your 3 way valves

before i baught my kit i had looked into getting the parts and making the kit as well. the first thing i learned was that , unless you buy the parts in bulk the shipping they charge isnt worth it. buying just the parts needed for one kit after shipping it was about the same cost as buying the kit.

when you buy the kit cyber does all the prep work on the MPA3 as well.

cyber also ended up being EXTREMELY helpfull during the instalation process.

**hurleyhonda22** · 12-15-2007, 01:56 PM

Does the unmilled Mpa3 fit in a intelliframe? It looks like he didnt mill the sides of the valve in the pics

**pinkanese** · 12-17-2007, 04:07 PM

Well I guess I fond where soem of my Christmas money is going.

Two questions, what size hose are you using? And is there anyway to buy the cylinder and the ram, but not with all the cutting?

Thanks.

**cyberave68** · 12-17-2007, 06:42 PM

Originally Posted by BSSJackal

before i baught my kit i had looked into getting the parts and making the kit as well. the first thing i learned was that , unless you buy the parts in bulk the shipping they charge isnt worth it. buying just the parts needed for one kit after shipping it was about the same cost as buying the kit.

when you buy the kit cyber does all the prep work on the MPA3 as well.

cyber also ended up being EXTREMELY helpfull during the instalation process.

Thanks BSSJackal....

Originally Posted by hurleyhonda22

Does the unmilled Mpa3 fit in a intelliframe? It looks like he didnt mill the sides of the valve in the pics

No it wont, it needs just a bit on atleast 1 side. the piston is the only part that needs and work to it. (the round tube looking part) The valve is the brass spuare with the lever on it and does not need any sanding.

Originally Posted by pinkanese

Well I guess I fond where soem of my Christmas money is going.

Two questions, what size hose are you using? And is there anyway to buy the cylinder and the ram, but not with all the cutting?

Thanks.

The tube is 1/16" I.D. as for the piston, I can get them that way. Just dont have any right now. I set up all i had to do the kits...
Sorry

**pinkanese** · 12-18-2007, 04:18 PM

That's okay. I assume this is a spring return valve since you are only using a 2-way, but I cna see another hole on the cylinder. So is it a sprign return or a 2-way cylinder?

Thanks.

**Mechanic79** · 12-19-2007, 10:22 AM

I'm ready for my Pneumag kit.

can I get all clear hoses? stainless screws?
Can you ship with delivery confirmation? it's only 0.60 more. I will add it to shipping costs.

one Pneumag kit, Priority shipping plus delivery confirmation.

Hit me up on chat or PM. I have paypal with your name on it.

**cyberave68** · 01-09-2008, 08:12 PM

I have a few kits left...
Or if you need any parts let me know....

**Stayhuge** · 01-13-2008, 02:10 PM

Hi, Could I get:
FABCO MSV-2 (WITH LEVER)- - - - - - - - - - - $15.00
2 FT. OF AIR LINE (BLACK OR CLEAR) - - - - - $2.00

Sending you a PM about it. Thanks

**rory** · 01-16-2008, 08:03 PM

pm sent

**babyface** · 01-16-2008, 11:03 PM

pmin about brass nipples

**benraven** · 01-17-2008, 08:28 PM

Payment sent for one kit. Thanks!!

**Ares9989** · 01-18-2008, 03:29 PM

sending payment for one kit and one 90* fitting

**cyberave68** · 01-19-2008, 02:26 PM

All orders have been shipped...
Thanks to you for your purchases and if you need any help or have any questions you can find a few answers here.

I'm out of kits for now as i'm waiting on a few parts to get here. I will update when they are ready....

Thanks,
Cyberave68

**ultralight** · 01-24-2008, 04:00 PM

FABCO MSV-2 (WITH LEVER)- - - - - - - - - - - -$15.00
CLIPPARD MPA-3 (STOCK)- - - - - - - - - - - - - $10.00
6 FT. OF AIR LINE (BLACK)- - - - - - - - - - - - - -$6.00
3 STRAIGHT FITTINGS (WHITE)- - - - - - - - - - -$3.00

i don't need the mpa-3 modified in any way, and i don't need any mounting screws.

i will need 6 ft of air line though.

please PM me to let me know that you got the order, to confirm a total shipped price, and to let me know if any of the requested items are currently out of stock.

thanks.

**druid** · 01-25-2008, 09:08 PM

Please PM me when you have complete kits available again and the information I need to send you a MO. I too am in PA sho it shouldn't take very long for it to get to you.

Thanks!!!

druid

Thread: Lpr Fittings 90* And Straight Great for Pneumags

Thread Tools

Display

pnuemag kit

hoping this is still going...

Posting Permissions