I have a few markers that I use regularly and they have taken different iteration with time.
This is a thread to track some of those changes.
bolt-action, FSR Phantom
Tiberius 9.1
Tipx's
Tippmann SL-68 II
P68SC
I have a few markers that I use regularly and they have taken different iteration with time.
This is a thread to track some of those changes.
bolt-action, FSR Phantom
Tiberius 9.1
Tipx's
Tippmann SL-68 II
P68SC
Last edited by bowcycle; 11-13-2019 at 08:43 PM.
Some inspirations for some of the mods I've done:
FSR Phantom
SL-68 II
A few build pics of the tib pistol:
Last edited by bowcycle; 11-03-2018 at 10:28 PM.
I like the SL68s. I have a couple myself but the originals with back bottle asa, M16 grip and cast pump handle.
In the 2nd to last SL68 with Phantom feed, what's the rivet/screw/? above the barrel screw?
>>WTB<< Sydarm w/ constant air__WarpedMephisto half-c/f body__Ac!d c/f trigger__TASO humpback frame__an Oh-Mag
That's a nylon-tipped set screw. There's one on each side.
The guy who came up with that mod was looking for ways to limit the slop/twist in the pump stroke.
It's pretty ingenious!
I'm getting a phantom pump rod to see if that will let me use a phantom pump handle and phantom pump-rod bushing.
definitely fun! Digging the FS phantom
sold the FSR bits to the phantom (just can't stay in the back enough to make that work) and built it back up for roundball
shape the new body for the gas-thru fitting
trim the pump handle to my prefered length
shape a magpul poly rail and mount optics
and assemble with Apocalypse gen3 springpheed
Starting work on a new toy...