Results 1 to 7 of 7

Thread: AGD PowerHouse Regulator now available.

  1. #1

    AGD PowerHouse Regulator now available.

    What happens when the absolute quality Automag meets the absolute quality regulator? You get the Airgun Designs powerhouse regulator! Powerhouse regulators have shown the paintball industry how a quality regulator should act and how one should be built. Now AGD has added Powerhouse to their house with the Haymkr regulator built for AGD specs. The AGD version outputs a solid 850 psi of pressure to energize your Automag with the most consistent supply of air pressure it needs. This regulator will work with any Automag version you use. Built with a stainless threaded cartridge you now can own a regulator that will last right along side your Automag. Does not come with a tank. Requires a 4500 psi tested air tank to thread onto. Comes with great support from Powerhouse. Available now on the website.

    Name:  Powerhouse_AGD_1.jpg
Views: 171
Size:  36.5 KB
    AGD is in the house!
    Custom gun builds. All the parts. New Website. Factory Service available!
    www.airgundesigns.com

  2. #2
    Join Date
    Dec 2004
    Location
    Jeet yet ?
    Posts
    7,670
    Wished I had known you were up to this.

    I would have waited to get one.

    Much rather represent AGD....
    "Political correctness is fascism disguised as politeness"

  3. #3
    Join Date
    Oct 2001
    Location
    Inception Designs HQ
    Posts
    2,508
    Interesting, are these player rebuildable?
    Can these be adjusted, in limited capacity, i.e. 650psi to 950psi?
    Would these be able to come with different annodized bonnets?
    Is there a chance for a non-stainless steel option?

  4. #4
    Join Date
    Apr 2003
    Location
    New York City
    Posts
    1,120
    Quote Originally Posted by Nobody View Post
    Interesting, are these player rebuildable?
    Can these be adjusted, in limited capacity, i.e. 650psi to 950psi?
    Would these be able to come with different annodized bonnets?
    Is there a chance for a non-stainless steel option?
    While I wouldn't recommend a non-stainless steel thread cap for these regs, I suspect the Aerolite Pro reg caps may work with these. I don't have a gen III reg to compare to, but I believe the geometry for this part didn't change between gen II (Aerolite Pro) and gen III (AGD).

    Red - https://www.ansgear.com/HK_Army_Aero...gprotc-red.htm
    Black - https://www.ansgear.com/HK_Army_Aero...rotc-black.htm
    Gold - https://www.ansgear.com/HK_Army_Aero...protc-gold.htm

  5. #5
    Join Date
    Oct 2004
    Location
    Mt. Pleasant, SC
    Posts
    2,425
    MOTM14
    I think the first release will be set to 850. I originally asked about this on the gen1. I think there is a little bit more involved than just adding a shim or swapping a piston for the higher pressures. I know they are looking at it though.

  6. #6
    Join Date
    Mar 2002
    Location
    VA
    Posts
    3,205
    Awesome work!! It would go great with my Carl Bonta E-mag

  7. #7
    Join Date
    Feb 2006
    Location
    Lancaster, PA
    Posts
    757
    My project X-Mag needs a tank, this might be it...
    Steve Shuey , Team Crimson Reign

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •