Results 1 to 11 of 11

Thread: AGD PowerHouse Regulator now available.

  1. #1

    AGD PowerHouse Regulator now available.

    What happens when the absolute quality Automag meets the absolute quality regulator? You get the Airgun Designs powerhouse regulator! Powerhouse regulators have shown the paintball industry how a quality regulator should act and how one should be built. Now AGD has added Powerhouse to their house with the Haymkr regulator built for AGD specs. The AGD version outputs a solid 850 psi of pressure to energize your Automag with the most consistent supply of air pressure it needs. This regulator will work with any Automag version you use. Built with a stainless threaded cartridge you now can own a regulator that will last right along side your Automag. Does not come with a tank. Requires a 4500 psi tested air tank to thread onto. Comes with great support from Powerhouse. Available now on the website.

    Click image for larger version. 

Name:	Powerhouse_AGD_1.jpg 
Views:	1537 
Size:	36.5 KB 
ID:	101219
    AGD is in the house!
    Custom gun builds. All the parts. New Website. Factory Service available!
    www.airgundesigns.com

  2. #2
    Join Date
    Dec 2004
    Location
    Jeet yet ?
    Posts
    8,207
    Wished I had known you were up to this.

    I would have waited to get one.

    Much rather represent AGD....

  3. #3
    Join Date
    Oct 2001
    Location
    Inception Designs HQ
    Posts
    3,246
    Interesting, are these player rebuildable?
    Can these be adjusted, in limited capacity, i.e. 650psi to 950psi?
    Would these be able to come with different annodized bonnets?
    Is there a chance for a non-stainless steel option?

  4. #4
    Join Date
    Apr 2003
    Posts
    1,161
    Quote Originally Posted by Nobody View Post
    Interesting, are these player rebuildable?
    Can these be adjusted, in limited capacity, i.e. 650psi to 950psi?
    Would these be able to come with different annodized bonnets?
    Is there a chance for a non-stainless steel option?
    While I wouldn't recommend a non-stainless steel thread cap for these regs, I suspect the Aerolite Pro reg caps may work with these. I don't have a gen III reg to compare to, but I believe the geometry for this part didn't change between gen II (Aerolite Pro) and gen III (AGD).

    Red - https://www.ansgear.com/HK_Army_Aero...gprotc-red.htm
    Black - https://www.ansgear.com/HK_Army_Aero...rotc-black.htm
    Gold - https://www.ansgear.com/HK_Army_Aero...protc-gold.htm

  5. #5
    Join Date
    Oct 2004
    Location
    Mt. Pleasant, SC
    Posts
    2,749
    I think the first release will be set to 850. I originally asked about this on the gen1. I think there is a little bit more involved than just adding a shim or swapping a piston for the higher pressures. I know they are looking at it though.

  6. #6
    Join Date
    Mar 2002
    Location
    VA
    Posts
    3,307
    Awesome work!! It would go great with my Carl Bonta E-mag

  7. #7
    Join Date
    Feb 2006
    Location
    Lancaster, PA
    Posts
    770
    My project X-Mag needs a tank, this might be it...
    Steve Shuey , Team Crimson Reign

  8. #8
    How does this compare against the AGD Flatline regulator? Is this just a screw-in version of the Flatline?

  9. #9
    Join Date
    Aug 2007
    Location
    The Motor City
    Posts
    491
    No it’s a reg from Powerhouse built to AGD spec with a 850 psi output. I have one and it’s great




    Sent from my iPhone using Tapatalk

  10. #10
    Join Date
    Apr 2005
    Location
    rva
    Posts
    335
    Any chance we see another run of these, Sandman?

  11. #11
    I’m hoping for another shot too one day

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •